[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191030153904.8715-4-georgi.djakov@linaro.org>
Date: Wed, 30 Oct 2019 17:39:04 +0200
From: Georgi Djakov <georgi.djakov@...aro.org>
To: robh+dt@...nel.org, linux-pm@...r.kernel.org
Cc: agross@...nel.org, bjorn.andersson@...aro.org,
evgreen@...omium.org, daidavid1@...eaurora.org,
vincent.guittot@...aro.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
georgi.djakov@...aro.org
Subject: [PATCH v10 3/3] arm64: dts: msm8916: Add interconnect provider DT nodes
Add nodes for the network-on-chip interconnect buses present on
MSM8916-based platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@...aro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 28 +++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5ea9fb8f2f87..9c4d89319e7c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,msm8916.h>
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
@@ -364,11 +365,38 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ bimc: interconnect@...000 {
+ compatible = "qcom,msm8916-bimc";
+ reg = <0x00400000 0x62000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
restart@...000 {
compatible = "qcom,pshold";
reg = <0x4ab000 0x4>;
};
+ pcnoc: interconnect@...000 {
+ compatible = "qcom,msm8916-pcnoc";
+ reg = <0x00500000 0x11000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+ };
+
+ snoc: interconnect@...000 {
+ compatible = "qcom,msm8916-snoc";
+ reg = <0x00580000 0x14000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
msmgpio: pinctrl@...0000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;
Powered by blists - more mailing lists