| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 31 Oct 2019 17:51:10 +0530
From: Taniya Das <tdas@...eaurora.org>
To: Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>
Cc: David Brown <david.brown@...aro.org>,
Rajendra Nayak <rnayak@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
Andy Gross <agross@...nel.org>, devicetree@...r.kernel.org,
robh@...nel.org, robh+dt@...nel.org,
Taniya Das <tdas@...eaurora.org>
Subject: [PATCH v1 4/7] clk: qcom: Add graphics clock controller driver for SC7180
Add support for the graphics clock controller found on SC7180
based devices. This would allow graphics drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@...eaurora.org>
---
drivers/clk/qcom/Kconfig | 8 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gpucc-sc7180.c | 274 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 283 insertions(+)
create mode 100644 drivers/clk/qcom/gpucc-sc7180.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 91706d8..c898e62 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -236,6 +236,14 @@ config SC_GCC_7180
Say Y if you want to use peripheral devices such as UART, SPI,
I2C, USB, UFS, SDCC, etc.
+config SC_GPUCC_7180
+ tristate "SC7180 Graphics Clock Controller"
+ select SC_GCC_7180
+ help
+ Support for the graphics clock controller on SC7180 devices.
+ Say Y if you want to support graphics controller devices and
+ functionality such as 3D graphics.
+
config SDM_CAMCC_845
tristate "SDM845 Camera Clock Controller"
select SDM_GCC_845
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 6fb356a..b89a292 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o
obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o
+obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
diff --git a/drivers/clk/qcom/gpucc-sc7180.c b/drivers/clk/qcom/gpucc-sc7180.c
new file mode 100644
index 0000000..0d893e6
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-sc7180.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "gdsc.h"
+
+#define CX_GMU_CBCR_SLEEP_MASK 0xF
+#define CX_GMU_CBCR_SLEEP_SHIFT 4
+#define CX_GMU_CBCR_WAKE_MASK 0xF
+#define CX_GMU_CBCR_WAKE_SHIFT 8
+#define CLK_DIS_WAIT_SHIFT 12
+#define CLK_DIS_WAIT_MASK (0xf << CLK_DIS_WAIT_SHIFT)
+
+enum {
+ P_BI_TCXO,
+ P_CORE_BI_PLL_TEST_SE,
+ P_GPLL0_OUT_MAIN,
+ P_GPLL0_OUT_MAIN_DIV,
+ P_GPU_CC_PLL1_OUT_EVEN,
+ P_GPU_CC_PLL1_OUT_MAIN,
+ P_GPU_CC_PLL1_OUT_ODD,
+};
+
+static struct pll_vco fabia_vco[] = {
+ { 249600000, 2000000000, 0 },
+};
+
+static struct clk_alpha_pll gpu_cc_pll1 = {
+ .offset = 0x100,
+ .vco_table = fabia_vco,
+ .num_vco = ARRAY_SIZE(fabia_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_pll1",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ .name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_fabia_ops,
+ },
+ },
+};
+
+static const struct parent_map gpu_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPU_CC_PLL1_OUT_MAIN, 3 },
+ { P_GPLL0_OUT_MAIN, 5 },
+ { P_GPLL0_OUT_MAIN_DIV, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_0[] = {
+ { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+ { .hw = &gpu_cc_pll1.clkr.hw },
+ { .fw_name = "gcc_gpu_gpll0_clk_src", .name = "gcc_gpu_gpll0_clk_src" },
+ { .fw_name = "gcc_gpu_gpll0_div_clk_src",
+ .name = "gcc_gpu_gpll0_div_clk_src" },
+ { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(200000000, P_GPLL0_OUT_MAIN_DIV, 1.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gpu_cc_gmu_clk_src = {
+ .cmd_rcgr = 0x1120,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gpu_cc_parent_map_0,
+ .freq_tbl = ftbl_gpu_cc_gmu_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_gmu_clk_src",
+ .parent_data = gpu_cc_parent_data_0,
+ .num_parents = 5,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_branch gpu_cc_crc_ahb_clk = {
+ .halt_reg = 0x107c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x107c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_crc_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_gmu_clk = {
+ .halt_reg = 0x1098,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1098,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_gmu_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &gpu_cc_gmu_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
+ .halt_reg = 0x108c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x108c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_snoc_dvm_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cxo_aon_clk = {
+ .halt_reg = 0x1004,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cxo_aon_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cxo_clk = {
+ .halt_reg = 0x109c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x109c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cxo_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc cx_gdsc = {
+ .gdscr = 0x106c,
+ .gds_hw_ctrl = 0x1540,
+ .pd = {
+ .name = "cx_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = VOTABLE,
+};
+
+static struct gdsc *gpu_cc_sc7180_gdscs[] = {
+ [CX_GDSC] = &cx_gdsc,
+};
+
+static struct clk_regmap *gpu_cc_sc7180_clocks[] = {
+ [GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
+ [GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
+ [GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
+ [GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
+ [GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
+ [GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
+ [GPU_CC_PLL1] = &gpu_cc_pll1.clkr,
+};
+
+static const struct regmap_config gpu_cc_sc7180_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x8008,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc gpu_cc_sc7180_desc = {
+ .config = &gpu_cc_sc7180_regmap_config,
+ .clks = gpu_cc_sc7180_clocks,
+ .num_clks = ARRAY_SIZE(gpu_cc_sc7180_clocks),
+ .gdscs = gpu_cc_sc7180_gdscs,
+ .num_gdscs = ARRAY_SIZE(gpu_cc_sc7180_gdscs),
+};
+
+static const struct of_device_id gpu_cc_sc7180_match_table[] = {
+ { .compatible = "qcom,sc7180-gpucc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gpu_cc_sc7180_match_table);
+
+static int gpu_cc_sc7180_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+ struct alpha_pll_config gpu_cc_pll_config = {};
+ unsigned int value, mask;
+
+ regmap = qcom_cc_map(pdev, &gpu_cc_sc7180_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ /* 360MHz Configuration */
+ gpu_cc_pll_config.l = 0x12;
+ gpu_cc_pll_config.alpha = 0xC000;
+ gpu_cc_pll_config.config_ctl_val = 0x20485699;
+ gpu_cc_pll_config.config_ctl_hi_val = 0x00002067;
+ gpu_cc_pll_config.user_ctl_val = 0x00000001;
+ gpu_cc_pll_config.user_ctl_hi_val = 0x00004805;
+ gpu_cc_pll_config.test_ctl_hi_val = 0x40000000;
+
+ clk_fabia_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll_config);
+
+ /* Recommended WAKEUP/SLEEP settings for the gpu_cc_cx_gmu_clk */
+ mask = CX_GMU_CBCR_WAKE_MASK << CX_GMU_CBCR_WAKE_SHIFT;
+ mask |= CX_GMU_CBCR_SLEEP_MASK << CX_GMU_CBCR_SLEEP_SHIFT;
+ value = 0xF << CX_GMU_CBCR_WAKE_SHIFT | 0xF << CX_GMU_CBCR_SLEEP_SHIFT;
+ regmap_update_bits(regmap, 0x1098, mask, value);
+
+ /* gpu_cc_ahb_clk */
+ regmap_update_bits(regmap, 0x1078, 0x1, 0x1);
+
+ /* Configure clk_dis_wait for gpu_cx_gdsc */
+ regmap_update_bits(regmap, 0x106c, CLK_DIS_WAIT_MASK,
+ 8 << CLK_DIS_WAIT_SHIFT);
+
+ return qcom_cc_really_probe(pdev, &gpu_cc_sc7180_desc, regmap);
+}
+
+static struct platform_driver gpu_cc_sc7180_driver = {
+ .probe = gpu_cc_sc7180_probe,
+ .driver = {
+ .name = "sc7180-gpucc",
+ .of_match_table = gpu_cc_sc7180_match_table,
+ },
+};
+
+static int __init gpu_cc_sc7180_init(void)
+{
+ return platform_driver_register(&gpu_cc_sc7180_driver);
+}
+core_initcall(gpu_cc_sc7180_init);
+
+static void __exit gpu_cc_sc7180_exit(void)
+{
+ platform_driver_unregister(&gpu_cc_sc7180_driver);
+}
+module_exit(gpu_cc_sc7180_exit);
+
+MODULE_DESCRIPTION("QTI GPU_CC SC7180 Driver");
+MODULE_LICENSE("GPL v2");
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
Powered by blists - more mailing lists