[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191031123040.26316-4-benjamin.gaignard@st.com>
Date: Thu, 31 Oct 2019 13:30:39 +0100
From: Benjamin Gaignard <benjamin.gaignard@...com>
To: <robh+dt@...nel.org>, <mark.rutland@....com>,
<alexandre.torgue@...com>, <fabrice.gasnier@...com>,
<jic23@...nel.org>, <knaack.h@....de>, <lars@...afoo.de>,
<pmeerw@...erw.net>, <lee.jones@...aro.org>,
<thierry.reding@...il.com>, <u.kleine-koenig@...gutronix.de>,
<benjamin.gaignard@...com>
CC: <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-iio@...r.kernel.org>,
<linux-pwm@...r.kernel.org>
Subject: [PATCH 3/4] dt-bindings: pwm: Convert stm32 pwm bindings to json-schema
Convert the STM32 pwm binding to DT schema format using json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...com>
---
.../devicetree/bindings/pwm/pwm-stm32.txt | 38 ----------------
.../devicetree/bindings/pwm/st,stm32-pwm.yaml | 51 ++++++++++++++++++++++
2 files changed, 51 insertions(+), 38 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32.txt
create mode 100644 Documentation/devicetree/bindings/pwm/st,stm32-pwm.yaml
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
deleted file mode 100644
index a8690bfa5e1f..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-STMicroelectronics STM32 Timers PWM bindings
-
-Must be a sub-node of an STM32 Timers device tree node.
-See ../mfd/stm32-timers.txt for details about the parent node.
-
-Required parameters:
-- compatible: Must be "st,stm32-pwm".
-- pinctrl-names: Set to "default".
-- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.
- For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
-- #pwm-cells: Should be set to 3. This PWM chip uses the default 3 cells
- bindings defined in pwm.txt.
-
-Optional parameters:
-- st,breakinput: One or two <index level filter> to describe break input configurations.
- "index" indicates on which break input (0 or 1) the configuration
- should be applied.
- "level" gives the active level (0=low or 1=high) of the input signal
- for this configuration.
- "filter" gives the filtering value to be applied.
-
-Example:
- timers@...10000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40010000 0x400>;
- clocks = <&rcc 0 160>;
- clock-names = "int";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- pinctrl-0 = <&pwm1_pins>;
- pinctrl-names = "default";
- st,breakinput = <0 1 5>;
- };
- };
diff --git a/Documentation/devicetree/bindings/pwm/st,stm32-pwm.yaml b/Documentation/devicetree/bindings/pwm/st,stm32-pwm.yaml
new file mode 100644
index 000000000000..d3f8180edd88
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/st,stm32-pwm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/st,stm32-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Timers PWM bindings
+
+maintainers:
+ - Benjamin Gaignard <benjamin.gaignard@...com>
+ - Fabrice Gasnier <fabrice.gasnier@...com>
+
+properties:
+ pwn:
+ type: object
+
+ description:
+ must be a sub-node of an STM32 Timer device tree node
+
+ properties:
+ compatible:
+ const: st,stm32-pwm
+
+ "#pwm-cells":
+ const: 3
+
+ st,breakinput:
+ description: |
+ One or two <index level filter> to describe break input configurations.
+ "index" indicates on which break input (0 or 1) the configuration should be applied.
+ "level" gives the active level (0=low or 1=high) of the input signal for this configuration.
+ "filter" gives the filtering value (up to 15) to be applied.
+
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 3
+ - maxItems: 3
+
+ required:
+ - "#pwm-cells"
+ - compatible
+
+examples:
+ - |
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ st,breakinput = <0 1 5>;
+ };
+
+...
--
2.15.0
Powered by blists - more mailing lists