| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <30206cd47d303d2dcaef87f4e3c7173481a0bddd.1572526427.git.amit.kucheria@linaro.org>
Date: Fri, 1 Nov 2019 00:07:25 +0530
From: Amit Kucheria <amit.kucheria@...aro.org>
To: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
bjorn.andersson@...aro.org, edubezval@...il.com, agross@...nel.org,
masneyb@...tation.org, swboyd@...omium.org, julia.lawall@...6.fr,
Amit Kucheria <amit.kucheria@...durent.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Zhang Rui <rui.zhang@...el.com>
Cc: linux-pm@...r.kernel.org
Subject: [PATCH v7 01/15] drivers: thermal: tsens: Get rid of id field in tsens_sensor
There are two fields - id and hw_id - to track what sensor an action was
to performed on. This was because the sensors connected to a TSENS IP
might not be contiguous i.e. 1, 2, 4, 5 with 3 being skipped.
This causes confusion in the code which uses hw_id sometimes and id
other times (tsens_get_temp, tsens_get_trend).
Switch to only using the hw_id field to track the physical ID of the
sensor. When we iterate through all the sensors connected to an IP
block, we use an index i to loop through the list of sensors, and then
return the actual hw_id that is registered on that index.
Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@...aro.org>
---
drivers/thermal/qcom/tsens-8960.c | 4 ++--
drivers/thermal/qcom/tsens-common.c | 16 +++++++++-------
drivers/thermal/qcom/tsens.c | 11 +++++------
drivers/thermal/qcom/tsens.h | 10 ++++------
4 files changed, 20 insertions(+), 21 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index e46a4e3f25c4..fb77acb8d13b 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -245,11 +245,11 @@ static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
return adc_code * slope + offset;
}
-static int get_temp_8960(struct tsens_priv *priv, int id, int *temp)
+static int get_temp_8960(struct tsens_sensor *s, int *temp)
{
int ret;
u32 code, trdy;
- const struct tsens_sensor *s = &priv->sensor[id];
+ struct tsens_priv *priv = s->priv;
unsigned long timeout;
timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 528df8801254..c037bdf92c66 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -83,11 +83,12 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
return degc;
}
-int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
+int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
{
- struct tsens_sensor *s = &priv->sensor[i];
- u32 temp_idx = LAST_TEMP_0 + s->hw_id;
- u32 valid_idx = VALID_0 + s->hw_id;
+ struct tsens_priv *priv = s->priv;
+ int hw_id = s->hw_id;
+ u32 temp_idx = LAST_TEMP_0 + hw_id;
+ u32 valid_idx = VALID_0 + hw_id;
u32 last_temp = 0, valid, mask;
int ret;
@@ -123,12 +124,13 @@ int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
return 0;
}
-int get_temp_common(struct tsens_priv *priv, int i, int *temp)
+int get_temp_common(struct tsens_sensor *s, int *temp)
{
- struct tsens_sensor *s = &priv->sensor[i];
+ struct tsens_priv *priv = s->priv;
+ int hw_id = s->hw_id;
int last_temp = 0, ret;
- ret = regmap_field_read(priv->rf[LAST_TEMP_0 + s->hw_id], &last_temp);
+ ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
if (ret)
return ret;
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 0627d8615c30..6ed687a6e53c 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -14,19 +14,19 @@
static int tsens_get_temp(void *data, int *temp)
{
- const struct tsens_sensor *s = data;
+ struct tsens_sensor *s = data;
struct tsens_priv *priv = s->priv;
- return priv->ops->get_temp(priv, s->id, temp);
+ return priv->ops->get_temp(s, temp);
}
static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend)
{
- const struct tsens_sensor *s = data;
+ struct tsens_sensor *s = data;
struct tsens_priv *priv = s->priv;
if (priv->ops->get_trend)
- return priv->ops->get_trend(priv, s->id, trend);
+ return priv->ops->get_trend(s, trend);
return -ENOTSUPP;
}
@@ -86,8 +86,7 @@ static int tsens_register(struct tsens_priv *priv)
for (i = 0; i < priv->num_sensors; i++) {
priv->sensor[i].priv = priv;
- priv->sensor[i].id = i;
- tzd = devm_thermal_zone_of_sensor_register(priv->dev, i,
+ tzd = devm_thermal_zone_of_sensor_register(priv->dev, priv->sensor[i].hw_id,
&priv->sensor[i],
&tsens_of_ops);
if (IS_ERR(tzd))
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index b89083b61c38..84e5447c5686 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -32,7 +32,6 @@ enum tsens_ver {
* @priv: tsens device instance that this sensor is connected to
* @tzd: pointer to the thermal zone that this sensor is in
* @offset: offset of temperature adjustment curve
- * @id: Sensor ID
* @hw_id: HW ID can be used in case of platform-specific IDs
* @slope: slope of temperature adjustment curve
* @status: 8960-specific variable to track 8960 and 8660 status register offset
@@ -41,7 +40,6 @@ struct tsens_sensor {
struct tsens_priv *priv;
struct thermal_zone_device *tzd;
int offset;
- unsigned int id;
unsigned int hw_id;
int slope;
u32 status;
@@ -62,13 +60,13 @@ struct tsens_ops {
/* mandatory callbacks */
int (*init)(struct tsens_priv *priv);
int (*calibrate)(struct tsens_priv *priv);
- int (*get_temp)(struct tsens_priv *priv, int i, int *temp);
+ int (*get_temp)(struct tsens_sensor *s, int *temp);
/* optional callbacks */
int (*enable)(struct tsens_priv *priv, int i);
void (*disable)(struct tsens_priv *priv);
int (*suspend)(struct tsens_priv *priv);
int (*resume)(struct tsens_priv *priv);
- int (*get_trend)(struct tsens_priv *priv, int i, enum thermal_trend *trend);
+ int (*get_trend)(struct tsens_sensor *s, enum thermal_trend *trend);
};
#define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \
@@ -314,8 +312,8 @@ struct tsens_priv {
char *qfprom_read(struct device *dev, const char *cname);
void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
int init_common(struct tsens_priv *priv);
-int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp);
-int get_temp_common(struct tsens_priv *priv, int i, int *temp);
+int get_temp_tsens_valid(struct tsens_sensor *s, int *temp);
+int get_temp_common(struct tsens_sensor *s, int *temp);
/* TSENS target */
extern const struct tsens_plat_data data_8960;
--
2.17.1
Powered by blists - more mailing lists