linux-kernel - [PATCH v2] pinctrl: at91: Enable slewrate by default on SAM9X60

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 1 Nov 2019 11:20:31 +0200
From:   Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
To:     <linux-arm-kernel@...ts.infradead.org>,
        <linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>
CC:     <ludovic.desroches@...rochip.com>, <linus.walleij@...aro.org>,
        <nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
        <robh+dt@...nel.org>, <claudiu.beznea@...rochip.com>,
        Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
Subject: [PATCH v2] pinctrl: at91: Enable slewrate by default on SAM9X60

On SAM9X60, slewrate should be enabled on pins with a switching frequency
below 50Mhz. Since most of our pins do not exceed this value, we enable
slewrate by default. Pins with a switching value that exceeds 50Mhz will
have to explicitly disable slewrate.

This patch changes the ABI. However, the slewrate macros are only used
by SAM9X60 and, at this moment, there are no device-tree files available
for this platform.

Suggested-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
---

Changes in v2:
 - updated commit message to reflect the ABI change

 drivers/pinctrl/pinctrl-at91.c     | 4 ++--
 include/dt-bindings/pinctrl/at91.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 117075b5798f..c135149e84e9 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -85,8 +85,8 @@ enum drive_strength_bit {
 					 DRIVE_STRENGTH_SHIFT)
 
 enum slewrate_bit {
-	SLEWRATE_BIT_DIS,
 	SLEWRATE_BIT_ENA,
+	SLEWRATE_BIT_DIS,
 };
 
 #define SLEWRATE_BIT_MSK(name)		(SLEWRATE_BIT_##name << SLEWRATE_SHIFT)
@@ -669,7 +669,7 @@ static void at91_mux_sam9x60_set_slewrate(void __iomem *pio, unsigned pin,
 {
 	unsigned int tmp;
 
-	if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA)
+	if (setting < SLEWRATE_BIT_ENA || setting > SLEWRATE_BIT_DIS)
 		return;
 
 	tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR);
diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
index 3831f91fb3ba..e8e117306b1b 100644
--- a/include/dt-bindings/pinctrl/at91.h
+++ b/include/dt-bindings/pinctrl/at91.h
@@ -27,8 +27,8 @@
 #define AT91_PINCTRL_DRIVE_STRENGTH_MED			(0x2 << 5)
 #define AT91_PINCTRL_DRIVE_STRENGTH_HI			(0x3 << 5)
 
-#define AT91_PINCTRL_SLEWRATE_DIS	(0x0 << 9)
-#define AT91_PINCTRL_SLEWRATE_ENA	(0x1 << 9)
+#define AT91_PINCTRL_SLEWRATE_ENA	(0x0 << 9)
+#define AT91_PINCTRL_SLEWRATE_DIS	(0x1 << 9)
 
 #define AT91_PIOA	0
 #define AT91_PIOB	1
-- 
2.20.1