[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1572588353-110682-5-git-send-email-manish.narani@xilinx.com>
Date: Fri, 1 Nov 2019 11:35:49 +0530
From: Manish Narani <manish.narani@...inx.com>
To: ulf.hansson@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
adrian.hunter@...el.com, michal.simek@...inx.com,
jolly.shah@...inx.com, nava.manne@...inx.com,
rajan.vaja@...inx.com, manish.narani@...inx.com
Cc: linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
git@...inx.com
Subject: [PATCH v5 4/8] dt-bindings: mmc: Add optional generic properties for mmc
Add optional properties for mmc hosts which are used to set clk delays
for different speed modes in the controller.
Signed-off-by: Manish Narani <manish.narani@...inx.com>
---
.../bindings/mmc/mmc-controller.yaml | 92 +++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 080754e0ef35..87a83d966851 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -212,6 +212,98 @@ properties:
description:
eMMC HS400 enhanced strobe mode is supported
+ # Below mentioned are the clock (phase) delays which are to be configured
+ # in the controller while switching to particular speed mode. The range
+ # of values are 0 to 359 degrees.
+
+ clk-phase-legacy:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for Legacy Mode.
+
+ clk-phase-mmc-hs:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair degrees for MMC HS.
+
+ clk-phase-sd-hs:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for SD HS.
+
+ clk-phase-uhs-sdr12:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for SDR12.
+
+ clk-phase-uhs-sdr25:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for SDR25.
+
+ clk-phase-uhs-sdr50:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for SDR50.
+
+ clk-phase-uhs-sdr104:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for SDR104.
+
+ clk-phase-uhs-ddr50:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for SD DDR50.
+
+ clk-phase-mmc-ddr52:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for MMC DDR52.
+
+ clk-phase-mmc-hs200:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for MMC HS200.
+
+ clk-phase-mmc-hs400:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 359
+ description:
+ Input/Output Clock Delay pair in degrees for MMC HS400.
+
dsr:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
--
2.17.1
Powered by blists - more mailing lists