[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191102002721.4091180-3-bjorn.andersson@linaro.org>
Date: Fri, 1 Nov 2019 17:27:21 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Bjorn Helgaas <bhelgaas@...gle.com>,
Stanimir Varbanov <svarbanov@...sol.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Andrew Murray <andrew.murray@....com>,
Philipp Zabel <p.zabel@...gutronix.de>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/2] PCI: qcom: Add support for SDM845 PCIe controller
The SDM845 has one Gen2 and one Gen3 controller, add support for these.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
Changes since v1:
- Style changes requested by Stan
- Tested with second PCIe controller as well
drivers/pci/controller/dwc/pcie-qcom.c | 152 +++++++++++++++++++++++++
1 file changed, 152 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 7e581748ee9f..35f4980480bb 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -54,6 +54,7 @@
#define PCIE20_PARF_LTSSM 0x1B0
#define PCIE20_PARF_SID_OFFSET 0x234
#define PCIE20_PARF_BDF_TRANSLATE_CFG 0x24C
+#define PCIE20_PARF_DEVICE_TYPE 0x1000
#define PCIE20_ELBI_SYS_CTRL 0x04
#define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0)
@@ -80,6 +81,8 @@
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
#define SLV_ADDR_SPACE_SZ 0x10000000
+#define DEVICE_TYPE_RC 0x4
+
#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
struct qcom_pcie_resources_2_1_0 {
struct clk *iface_clk;
@@ -139,12 +142,20 @@ struct qcom_pcie_resources_2_3_3 {
struct reset_control *rst[7];
};
+struct qcom_pcie_resources_2_7_0 {
+ struct clk_bulk_data clks[6];
+ struct regulator_bulk_data supplies[2];
+ struct reset_control *pci_reset;
+ struct clk *pipe_clk;
+};
+
union qcom_pcie_resources {
struct qcom_pcie_resources_1_0_0 v1_0_0;
struct qcom_pcie_resources_2_1_0 v2_1_0;
struct qcom_pcie_resources_2_3_2 v2_3_2;
struct qcom_pcie_resources_2_3_3 v2_3_3;
struct qcom_pcie_resources_2_4_0 v2_4_0;
+ struct qcom_pcie_resources_2_7_0 v2_7_0;
};
struct qcom_pcie;
@@ -1068,6 +1079,136 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
return ret;
}
+static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
+ struct dw_pcie *pci = pcie->pci;
+ struct device *dev = pci->dev;
+ int ret;
+
+ res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
+ if (IS_ERR(res->pci_reset))
+ return PTR_ERR(res->pci_reset);
+
+ res->supplies[0].supply = "vdda";
+ res->supplies[1].supply = "vddpe-3v3";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies),
+ res->supplies);
+ if (ret)
+ return ret;
+
+ res->clks[0].id = "aux";
+ res->clks[1].id = "cfg";
+ res->clks[2].id = "bus_master";
+ res->clks[3].id = "bus_slave";
+ res->clks[4].id = "slave_q2a";
+ res->clks[5].id = "tbu";
+
+ ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks);
+ if (ret < 0)
+ return ret;
+
+ res->pipe_clk = devm_clk_get(dev, "pipe");
+ return PTR_ERR_OR_ZERO(res->pipe_clk);
+}
+
+static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
+ struct dw_pcie *pci = pcie->pci;
+ struct device *dev = pci->dev;
+ u32 val;
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
+ if (ret < 0) {
+ dev_err(dev, "cannot enable regulators\n");
+ return ret;
+ }
+
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
+ if (ret < 0)
+ goto err_disable_regulators;
+
+ ret = reset_control_assert(res->pci_reset);
+ if (ret < 0) {
+ dev_err(dev, "cannot deassert pci reset\n");
+ goto err_disable_clocks;
+ }
+
+ msleep(20);
+
+ ret = reset_control_deassert(res->pci_reset);
+ if (ret < 0) {
+ dev_err(dev, "cannot deassert pci reset\n");
+ goto err_assert_resets;
+ }
+
+ ret = clk_prepare_enable(res->pipe_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable pipe clock\n");
+ goto err_assert_resets;
+ }
+
+ /* configure PCIe to RC mode */
+ writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);
+
+ /* enable PCIe clocks and resets */
+ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+ val &= ~BIT(0);
+ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+
+ /* change DBI base address */
+ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+ /* MAC PHY_POWERDOWN MUX DISABLE */
+ val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL);
+ val &= ~BIT(29);
+ writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL);
+
+ val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
+ val |= BIT(4);
+ writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+ val |= BIT(31);
+ writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+ }
+
+ return 0;
+err_assert_resets:
+ reset_control_assert(res->pci_reset);
+err_disable_clocks:
+ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
+err_disable_regulators:
+ regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+
+ return ret;
+}
+
+static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
+
+ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
+ regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+}
+
+static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
+
+ return clk_prepare_enable(res->pipe_clk);
+}
+
+static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
+
+ clk_disable_unprepare(res->pipe_clk);
+}
+
static int qcom_pcie_link_up(struct dw_pcie *pci)
{
u16 val = readw(pci->dbi_base + PCIE20_CAP + PCI_EXP_LNKSTA);
@@ -1167,6 +1308,16 @@ static const struct qcom_pcie_ops ops_2_3_3 = {
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
};
+/* Qcom IP rev.: 2.7.0 Synopsys IP rev.: 4.30a */
+static const struct qcom_pcie_ops ops_2_7_0 = {
+ .get_resources = qcom_pcie_get_resources_2_7_0,
+ .init = qcom_pcie_init_2_7_0,
+ .deinit = qcom_pcie_deinit_2_7_0,
+ .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+ .post_init = qcom_pcie_post_init_2_7_0,
+ .post_deinit = qcom_pcie_post_deinit_2_7_0,
+};
+
static const struct dw_pcie_ops dw_pcie_ops = {
.link_up = qcom_pcie_link_up,
};
@@ -1282,6 +1433,7 @@ static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
{ .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 },
{ .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 },
+ { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 },
{ }
};
--
2.23.0
Powered by blists - more mailing lists