lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191103204130.2172-15-digetx@gmail.com>
Date:   Sun,  3 Nov 2019 23:41:26 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Thierry Reding <thierry.reding@...il.com>,
        MyungJoo Ham <myungjoo.ham@...sung.com>,
        Kyungmin Park <kyungmin.park@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Tomeu Vizoso <tomeu.vizoso@...labora.com>,
        Peter Geis <pgwipeout@...il.com>,
        Michał Mirosław <mirq-linux@...e.qmqm.pl>
Cc:     linux-pm@...r.kernel.org, linux-tegra@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v8 14/18] PM / devfreq: tegra30: Disable consecutive interrupts when appropriate

Consecutive interrupts should be disabled when boosting is completed.

Currently the disabling of "lower" interrupt happens only for MCCPU
monitor that uses dependency threshold, but even in a case of MCCPU the
interrupt isn't getting disabled if CPU's activity is above the threshold.
This results in a lot of dummy interrupt requests. The boosting feature is
used by both MCCPU and MCALL, boosting should be stopped once it reaches 0
for both of the monitors and regardless of the activity level.

The boosting stops to grow once the maximum limit is hit and thus the
"upper" interrupt needs to be disabled when the limit is reached.

Reviewed-by: Chanwoo Choi <cw00.choi@...sung.com>
Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
 drivers/devfreq/tegra30-devfreq.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 4a5d513904a2..852bde6249c7 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -259,8 +259,10 @@ static void actmon_isr_device(struct tegra_devfreq *tegra,
 
 		dev_ctrl |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
 
-		if (dev->boost_freq >= tegra->max_freq)
+		if (dev->boost_freq >= tegra->max_freq) {
+			dev_ctrl &= ~ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
 			dev->boost_freq = tegra->max_freq;
+		}
 	} else if (intr_status & ACTMON_DEV_INTR_CONSECUTIVE_LOWER) {
 		/*
 		 * new_boost = old_boost * down_coef
@@ -271,15 +273,10 @@ static void actmon_isr_device(struct tegra_devfreq *tegra,
 
 		dev_ctrl |= ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
 
-		if (dev->boost_freq < (ACTMON_BOOST_FREQ_STEP >> 1))
-			dev->boost_freq = 0;
-	}
-
-	if (dev->config->avg_dependency_threshold) {
-		if (dev->avg_count >= dev->config->avg_dependency_threshold)
-			dev_ctrl |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
-		else if (dev->boost_freq == 0)
+		if (dev->boost_freq < (ACTMON_BOOST_FREQ_STEP >> 1)) {
 			dev_ctrl &= ~ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
+			dev->boost_freq = 0;
+		}
 	}
 
 	device_writel(dev, dev_ctrl, ACTMON_DEV_CTRL);
-- 
2.23.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ