linux-kernel - [PATCH 4.14 69/95] usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon,  4 Nov 2019 22:45:07 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Alan Stern <stern@...land.harvard.edu>,
        Seth Bollinger <Seth.Bollinger@...i.com>,
        Christoph Hellwig <hch@....de>,
        Piergiorgio Sartor <piergiorgio.sartor@...go.de>
Subject: [PATCH 4.14 69/95] usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")

From: Alan Stern <stern@...land.harvard.edu>

commit 9a976949613132977098fc49510b46fa8678d864 upstream.

Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG
overflows") attempted to solve a problem involving scatter-gather I/O
and USB/IP by setting the virt_boundary_mask for mass-storage devices.

However, it now turns out that this interacts badly with commit
09324d32d2a0 ("block: force an unlimited segment size on queues with a
virt boundary"), which was added later.  A typical error message is:

	ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
	total 32768 (slots), used 97 (slots)

There is no longer any reason to keep the virt_boundary_mask setting
for usb-storage.  It was needed in the first place only for handling
devices with a block size smaller than the maxpacket size and where
the host controller was not capable of fully general scatter-gather
operation (that is, able to merge two SG segments into a single USB
packet).  But:

	High-speed or slower connections never use a bulk maxpacket
	value larger than 512;

	The SCSI layer does not handle block devices with a block size
	smaller than 512 bytes;

	All the host controllers capable of SuperSpeed operation can
	handle fully general SG;

	Since commit ea44d190764b ("usbip: Implement SG support to
	vhci-hcd and stub driver") was merged, the USB/IP driver can
	also handle SG.

Therefore all supported device/controller combinations should be okay
with no need for any special virt_boundary_mask.  So in order to fix
the swiotlb problem, this patch reverts commit 747668dbc061.

Reported-and-tested-by: Piergiorgio Sartor <piergiorgio.sartor@...go.de>
Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2
Signed-off-by: Alan Stern <stern@...land.harvard.edu>
CC: Seth Bollinger <Seth.Bollinger@...i.com>
CC: <stable@...r.kernel.org>
Fixes: 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
Acked-by: Christoph Hellwig <hch@....de>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910211145520.1673-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/usb/storage/scsiglue.c |   10 ----------
 1 file changed, 10 deletions(-)

--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -81,7 +81,6 @@ static const char* host_info(struct Scsi
 static int slave_alloc (struct scsi_device *sdev)
 {
 	struct us_data *us = host_to_us(sdev->host);
-	int maxp;
 
 	/*
 	 * Set the INQUIRY transfer length to 36.  We don't use any of
@@ -91,15 +90,6 @@ static int slave_alloc (struct scsi_devi
 	sdev->inquiry_len = 36;
 
 	/*
-	 * USB has unusual scatter-gather requirements: the length of each
-	 * scatterlist element except the last must be divisible by the
-	 * Bulk maxpacket value.  Fortunately this value is always a
-	 * power of 2.  Inform the block layer about this requirement.
-	 */
-	maxp = usb_maxpacket(us->pusb_dev, us->recv_bulk_pipe, 0);
-	blk_queue_virt_boundary(sdev->request_queue, maxp - 1);
-
-	/*
 	 * Some host controllers may have alignment requirements.
 	 * We'll play it safe by requiring 512-byte alignment always.
 	 */