[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20191104083438.8288-1-christophe.roullier@st.com>
Date: Mon, 4 Nov 2019 09:34:38 +0100
From: Christophe Roullier <christophe.roullier@...com>
To: <robh@...nel.org>, <davem@...emloft.net>, <joabreu@...opsys.com>,
<mark.rutland@....com>, <mcoquelin.stm32@...il.com>,
<alexandre.torgue@...com>, <peppe.cavallaro@...com>
CC: <linux-stm32@...md-mailman.stormreply.com>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <netdev@...r.kernel.org>,
<christophe.roullier@...com>, <andrew@...n.ch>
Subject: [PATCH 1/1] net: ethernet: stmmac: fix warning when w=1 option is used during build
This patch fix the following warning:
warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
int val, ret;
Signed-off-by: Christophe Roullier <christophe.roullier@...com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 4ef041bdf6a1..595af2ec89fb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -175,7 +175,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
{
struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
u32 reg = dwmac->mode_reg;
- int val, ret;
+ int val;
switch (plat_dat->interface) {
case PHY_INTERFACE_MODE_MII:
@@ -211,8 +211,8 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
}
/* Need to update PMCCLRR (clear register) */
- ret = regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET,
- dwmac->ops->syscfg_eth_mask);
+ regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET,
+ dwmac->ops->syscfg_eth_mask);
/* Update PMCSETR (set register) */
return regmap_update_bits(dwmac->regmap, reg,
--
2.17.1
Powered by blists - more mailing lists