lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191104181502.15679-3-f.fainelli@gmail.com>
Date:   Mon,  4 Nov 2019 10:15:02 -0800
From:   Florian Fainelli <f.fainelli@...il.com>
To:     linux-arm-kernel@...ts.infradead.org
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Rob Herring <robh@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        bcm-kernel-feedback-list@...adcom.com (maintainer:BROADCOM BCM7XXX ARM
        ARCHITECTURE),
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 2/2] reset: brcmstb: Remove resource checks

The use of IS_ALIGNED() is incorrect, the typical resource we pass looks
like this: start: 0x8404318, size: 0x30. When using IS_ALIGNED() we will
get the following 0x8404318 & (0x18 - 1) = 0x10 which is definitively
not equal to 0, same goes with the size. These two checks would make the
driver fail probing.

Remove the resource checks, since there should be no constraint on the
base addresse or size.

Fixes: 77750bc089e4 ("reset: Add Broadcom STB SW_INIT reset controller driver")
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
 drivers/reset/reset-brcmstb.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/reset/reset-brcmstb.c b/drivers/reset/reset-brcmstb.c
index a608f445dad6..f213264c8567 100644
--- a/drivers/reset/reset-brcmstb.c
+++ b/drivers/reset/reset-brcmstb.c
@@ -91,12 +91,6 @@ static int brcmstb_reset_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!IS_ALIGNED(res->start, SW_INIT_BANK_SIZE) ||
-	    !IS_ALIGNED(resource_size(res), SW_INIT_BANK_SIZE)) {
-		dev_err(kdev, "incorrect register range\n");
-		return -EINVAL;
-	}
-
 	priv->base = devm_ioremap_resource(kdev, res);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ