linux-kernel - [Patch v2 07/10] arm: dtsi: dra76x: Add CAL dtsi node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191104204853.4355-8-bparrot@ti.com>
Date:   Mon, 4 Nov 2019 14:48:50 -0600
From:   Benoit Parrot <bparrot@...com>
To:     Tony Lindgren <tony@...mide.com>, Tero Kristo <t-kristo@...com>
CC:     <linux-omap@...r.kernel.org>, <linux-clk@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-media@...r.kernel.org>, Rob Herring <robh+dt@...nel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Benoit Parrot <bparrot@...com>
Subject: [Patch v2 07/10] arm: dtsi: dra76x: Add CAL dtsi node

Add the required dtsi node to support the Camera
Adaptation Layer (CAL) for the DRA76 family of devices.

Signed-off-by: Benoit Parrot <bparrot@...com>
---
 arch/arm/boot/dts/dra76x.dtsi | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index cdcba3f561c4..2f58c709c081 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -41,6 +41,49 @@
 
 };
 
+&l4_per3 {
+	target-module@...000 {			/* 0x489b0000, ap 25 34.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x1b0000 0x4>,
+		      <0x1b0010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1b0000 0x10000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra76-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0x6dc>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 /* MCAN interrupts are hard-wired to irqs 67, 68 */
 &crossbar_mpu {
 	ti,irqs-skip = <10 67 68 133 139 140>;
-- 
2.17.1