| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191105204334.GA629@bogus>
Date: Tue, 5 Nov 2019 14:43:34 -0600
From: Rob Herring <robh@...nel.org>
To: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
Cc: mazziesaccount@...il.com,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
Pavel Machek <pavel@....cz>, Dan Murphy <dmurphy@...com>,
Mark Rutland <mark.rutland@....com>,
Lee Jones <lee.jones@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-rtc@...r.kernel.org
Subject: Re: [RFC PATCH v3 02/15] dt-bindings: mfd: Document ROHM BD71828
bindings
On Fri, Nov 01, 2019 at 01:31:03PM +0200, Matti Vaittinen wrote:
> ROHM BD71828 Power management IC integrates 7 buck converters, 7 LDOs,
> a real-time clock (RTC), 3 GPO/regulator control pins, HALL input
> and a 32.768 kHz clock gate.
>
> Document the dt bindings drivers are using.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
> ---
>
> Changes from v2 - my first encounter with yaml :/
>
> .../bindings/mfd/rohm,bd71828-pmic.yaml | 249 ++++++++++++++++++
> 1 file changed, 249 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> new file mode 100644
> index 000000000000..b2a88f6e1bb7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> @@ -0,0 +1,249 @@
> +# SPDX-License-Identifier: GPL-2.0
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
for new bindings.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ROHM BD71828 Power Management Integrated Circuit bindings
> +
> +maintainers:
> + - Lee Jones <lee.jones@...aro.org>
> + - Rob Herring <robh@...nel.org>
> + - Mark Rutland <mark.rutland@....com>
Don't list me or Mark here. I maintain everything...
> +
> +description: |
> + BD71828GW is a single-chip power management IC for battery-powered portable
> + devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
> + single-cell linear charger. Also included is a Coulomb counter, a real-time
> + clock (RTC), and a 32.768 kHz clock gate.
> +
> + The BD71828 RUN state is divided into 4 configurable run-levels named RUN0,
> + RUN1, RUN2 and RUN3. Bucks 1, 2, 6 and 7 can be either controlled individually
> + via I2C, or some/all of them can be bound to run-levels and controlled as a
> + group. If bucks are controlled individually these run-levels are ignored. See
> + ../regulator/rohm,bd71828-regulator.yaml for how to define regulator voltages
> + for run-levels. Run-levels can be changed by I2C or GPIO depending on PMIC's
> + OTP configuration.
> +
> +properties:
> + compatible:
> + const: rohm,bd71828
blank line here please
> + reg:
> + description:
> + I2C slave address.
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> + description:
> + The interrupt line the device is connected to.
> +
> + gpio-controller: true
> + # Indicate BD71828 acts as a GPIO controller.
> +
> + "#gpio-cells":
> + const: 2
> + description: |
> + The first cell is the pin number and the second cell is used to specify
> + flags. See ../gpio/gpio.txt for more information.
> +
> + clocks:
> + description:
> + The parent clock connected to PMIC.
How many?
maxItems: 1
> +
> + "#clock-cells":
> + const: 0
> +
> + rohm,charger-sense-resistor:
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + description: |
> + BD71827 and BD71828 have SAR ADC for measuring charging currents.
> + External sense resistor (RSENSE in data sheet) should be used. If some
> + other but 30MOhm resistor is used the resistance value should be given
> + here in Ohms.
Standard units need a unit suffix as defined in property-units.txt. So
'-ohms' in this case. With that, you can drop $ref because we already
define the type.
Is there a valid range of values? If so, use minimum/maximum.
> +
> + regulators:
> + $ref: ../regulator/rohm,bd71828-regulator.yaml
Not bisectable. These files have to come in this patch or before.
> + description:
> + List of child nodes that specify the regulators.
> +
> + leds:
> + $ref: ../leds/rohm,leds-bd71828.yaml
Filename should match the compatible if possible.
> +
> + clock-output-names:
> + description:
> + Should contain name for output clock.
Need to document what the name is. Though, with only 1 clock, not that
useful.
> +
> + rohm,dvs-vsel-gpios:
> + description: |
> + GPIOs used to control PMIC run-levels. Should describe two GPIOs.
> + (See run-level control in data-sheet). If this property is omitted but
> + some bucks are marked to be controlled by run-levels - then OTP option
> + allowing run-level control via I2C is assumed.
How many? Needs 'maxItems'.
> +
> + gpio-reserved-ranges:
> + description: |
> + Usage of BD71828 GPIO pins can be changed via OTP. This property can be
> + used to mark the pins which should not be configured for GPIO. Please see
> + the ../gpio/gpio.txt for more information.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - "#clock-cells"
> + - regulators
> + - gpio-controller
> + - "#gpio-cells"
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/leds/common.h>
> + i2c {
'make dt_binding_check' reports an error building this, but I'm not
seeing where it is:
Error: Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.example.dts:155.36-37 syntax error
FATAL ERROR: Unable to parse input tree
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pmic: pmic@4b {
> + compatible = "rohm,bd71828";
> + reg = <0x4b>;
> +
> + interrupt-parent = <&gpio1>;
> + interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
> +
> + clocks = <&osc 0>;
> + #clock-cells = <0>;
> + clock-output-names = "bd71828-32k-out";
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-reserved-ranges = <0 1 2 1>;
> +
> + rohm,dvs-vsel-gpios = <&gpio1 12 0>, <&gpio1 13 0>;
> + rohm,charger-sense-resistor = <10000000>;
> +
> + regulators {
> + buck1: BUCK1 {
> + regulator-name = "buck1";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-ramp-delay = <2500>;
> + rohm,dvs-runlvl-ctrl;
> + rohm,dvs-runlevel0-voltage = <500000>;
> + rohm,dvs-runlevel1-voltage = <506250>;
> + rohm,dvs-runlevel2-voltage = <512500>;
> + rohm,dvs-runlevel3-voltage = <518750>;
> + regulator-boot-on;
> + };
> + buck2: BUCK2 {
> + regulator-name = "buck2";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-ramp-delay = <2500>;
> + rohm,dvs-runlvl-ctrl;
> + rohm,dvs-runlevel0-voltage = <500000>;
> + rohm,dvs-runlevel1-voltage = <506250>;
> + rohm,dvs-runlevel2-voltage = <512500>;
> + rohm,dvs-runlevel3-voltage = <518750>;
> + regulator-boot-on;
> + };
> + buck3: BUCK3 {
> + regulator-name = "buck3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-boot-on;
> + };
> + buck4: BUCK4 {
> + regulator-name = "buck4";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + };
> + buck5: BUCK5 {
> + regulator-name = "buck5";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + buck6: BUCK6 {
> + regulator-name = "buck6";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-ramp-delay = <2500>;
> + rohm,dvs-runlvl-ctrl;
> + rohm,dvs-runlevel0-voltage = <500000>;
> + rohm,dvs-runlevel1-voltage = <506250>;
> + rohm,dvs-runlevel2-voltage = <512500>;
> + rohm,dvs-runlevel3-voltage = <518750>;
> + regulator-boot-on;
> + };
> + buck7: BUCK7 {
> + regulator-name = "buck7";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-ramp-delay = <2500>;
> + rohm,dvs-runlvl-ctrl;
> + rohm,dvs-runlevel0-voltage = <500000>;
> + rohm,dvs-runlevel1-voltage = <506250>;
> + rohm,dvs-runlevel2-voltage = <512500>;
> + rohm,dvs-runlevel3-voltage = <518750>;
> + regulator-boot-on;
> + };
> + ldo1: LDO1 {
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + ldo2: LDO2 {
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + ldo3: LDO3 {
> + regulator-name = "ldo3";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + ldo4: LDO4 {
> + regulator-name = "ldo4";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + ldo5: LDO5 {
> + regulator-name = "ldo5";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + ldo6: LDO6 {
> + regulator-name = "ldo6";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + };
> + ldo7_reg: LDO7 {
> + regulator-name = "ldo7";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + };
> +
> + leds {
> + compatible = "rohm,bd71828-led";
> +
> + led-1 {
> + function = LED_FUNCTION_INDICATOR;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> + led-2 {
> + function = LED_FUNCTION_CHARGING;
> + color = <LED_COLOR_ID_AMBER>;
> + };
> + };
> + };
> + };
> --
> 2.21.0
>
>
> --
> Matti Vaittinen, Linux device drivers
> ROHM Semiconductors, Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
>
> ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
> Simon says - in Latin please.
> ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
> Thanks to Simon Glass for the translation =]
Powered by blists - more mailing lists