linux-kernel - [PATCH 08/62] gpio: gpio-bcm-kona: Use new GPIO_LINE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <47840e5f6268d598ed511dcdefcfeb9435109c21.1572945719.git.matti.vaittinen@fi.rohmeurope.com>
Date:   Tue, 5 Nov 2019 12:13:01 +0200
From:   Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To:     matti.vaittinen@...rohmeurope.com, mazziesaccount@...il.com
Cc:     Ray Jui <rjui@...adcom.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Scott Branden <sbranden@...adcom.com>,
        bcm-kernel-feedback-list@...adcom.com, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 08/62] gpio: gpio-bcm-kona: Use new GPIO_LINE_DIRECTION

t's hard for occasional GPIO code reader/writer to know if values 0/1
equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
GPIO_LINE_DIRECTION_OUT to help them out.

Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
---
 drivers/gpio/gpio-bcm-kona.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 9fa6d3a967d2..4122683eb1f9 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -127,7 +127,7 @@ static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
 	u32 val;
 
 	val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
-	return !!val;
+	return val ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
 }
 
 static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
@@ -144,7 +144,7 @@ static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
 
 	/* this function only applies to output pin */
-	if (bcm_kona_gpio_get_dir(chip, gpio) == 1)
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN)
 		goto out;
 
 	reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
@@ -170,7 +170,7 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
 	reg_base = kona_gpio->reg_base;
 	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
 
-	if (bcm_kona_gpio_get_dir(chip, gpio) == 1)
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN)
 		reg_offset = GPIO_IN_STATUS(bank_id);
 	else
 		reg_offset = GPIO_OUT_STATUS(bank_id);
-- 
2.21.0


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]