lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20191106191532.GD36595@minitux>
Date:   Wed, 6 Nov 2019 11:15:32 -0800
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Georgi Djakov <georgi.djakov@...aro.org>
Cc:     Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] arm64: dts: qcom: sdm845: Add second PCIe PHY and
 controller

On Wed 06 Nov 05:53 PST 2019, Georgi Djakov wrote:

> Hi Bjorn,
> 
> On 2.11.19 ??. 2:31 ??., Bjorn Andersson wrote:
> > Add the second PCIe controller and the associated QHP PHY found on
> > SDM845.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sdm845.dtsi | 111 +++++++++++++++++++++++++++
> >  1 file changed, 111 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index b93537b7a59f..0cdcc8d6d223 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -1468,6 +1468,117 @@
> >  			};
> >  		};
> >  
> > +		pcie1: pci@...8000 {
> > +			compatible = "qcom,pcie-sdm845", "snps,dw-pcie";
> > +			reg = <0 0x01c08000 0 0x2000>,
> > +			      <0 0x40000000 0 0xf1d>,
> > +			      <0 0x40000f20 0 0xa8>,
> > +			      <0 0x40100000 0 0x100000>;
> > +			reg-names = "parf", "dbi", "elbi", "config";
> > +			device_type = "pci";
> > +			linux,pci-domain = <1>;
> > +			bus-range = <0x00 0xff>;
> > +			num-lanes = <1>;
> > +
> > +			#address-cells = <3>;
> > +			#size-cells = <2>;
> > +
> > +			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
> > +				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
> > +
> > +			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
> > +			interrupt-names = "msi";
> > +			#interrupt-cells = <1>;
> > +			interrupt-map-mask = <0 0 0 0x7>;
> > +			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> > +					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> > +					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> > +					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> > +
> > +			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
> > +				 <&gcc GCC_PCIE_1_AUX_CLK>,
> > +				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> > +				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
> > +				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
> > +				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
> > +				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
> > +				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
> > +			clock-names = "pipe",
> > +				      "aux",
> > +				      "cfg",
> > +				      "bus_master",
> > +				      "bus_slave",
> > +				      "slave_q2a",
> > +				      "ref",
> > +				      "tbu";
> > +
> > +			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
> > +			assigned-clock-rates = <19200000>;
> > +
> > +			iommus = <&apps_smmu 0x1c00 0xf>;
> > +			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
> > +				    <0x100 &apps_smmu 0x1c01 0x1>,
> > +				    <0x200 &apps_smmu 0x1c02 0x1>,
> > +				    <0x300 &apps_smmu 0x1c03 0x1>,
> > +				    <0x400 &apps_smmu 0x1c04 0x1>,
> > +				    <0x500 &apps_smmu 0x1c05 0x1>,
> > +				    <0x600 &apps_smmu 0x1c06 0x1>,
> > +				    <0x700 &apps_smmu 0x1c07 0x1>,
> > +				    <0x800 &apps_smmu 0x1c08 0x1>,
> > +				    <0x900 &apps_smmu 0x1c09 0x1>,
> > +				    <0xa00 &apps_smmu 0x1c0a 0x1>,
> > +				    <0xb00 &apps_smmu 0x1c0b 0x1>,
> > +				    <0xc00 &apps_smmu 0x1c0c 0x1>,
> > +				    <0xd00 &apps_smmu 0x1c0d 0x1>,
> > +				    <0xe00 &apps_smmu 0x1c0e 0x1>,
> > +				    <0xf00 &apps_smmu 0x1c0f 0x1>;
> > +
> > +			resets = <&gcc GCC_PCIE_1_BCR>;
> > +			reset-names = "pci";
> > +
> > +			power-domains = <&gcc PCIE_1_GDSC>;
> > +
> > +			interconnects = <&rsc_hlos MASTER_PCIE_0 &rsc_hlos SLAVE_EBI1>;
> > +			interconnect-names = "pcie-mem";
> 
> Maybe leave this hunk out (although it looks good), until we conclude on these
> refactoring patches [1].
> 

Yes that makes sense and it's not necessary for it to be functional,
will drop it for now.

Regards,
Bjorn

> Thanks,
> Georgi
> 
> [1]
> http://lore.kernel.org/r/1571278852-8023-1-git-send-email-daidavid1@codeaurora.org

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ