[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191106065017.22144-1-rnayak@codeaurora.org>
Date: Wed, 6 Nov 2019 12:20:03 +0530
From: Rajendra Nayak <rnayak@...eaurora.org>
To: agross@...nel.org, robh+dt@...nel.org, bjorn.andersson@...aro.org
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, mka@...omium.org,
swboyd@...omium.org, Rajendra Nayak <rnayak@...eaurora.org>
Subject: [PATCH v4 00/14] Add device tree support for sc7180
Changes in v4:
* Rebased on top of Rob;s for-next
* reorderd patches to take care of pdc dependency
* Updated pdc binding to use a soc specific and soc independent compatible
* Other updates based on v3 feedback, changes listed in each patch
Changes in v3:
* PATCH 2/11: Updated the qup and uart lables to be consistent
with the naming convention followed in sdm845 as suggested
by Matthias
* Dropped 2 patches from v2 which added the new compatible and
binding updates for sc7180 pdc and reused sdm845 compatible instead
as suggested by Marc Z
This series adds DT support for basic peripherals on qualcomm's sc7180 SoC,
drivers for which are already upstream.
The series has a dependency on gcc clock driver patches [1]
to merge first
[1] https://www.spinics.net/lists/linux-clk/msg41851.html
Kiran Gunda (3):
arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device
arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
arm64: dts: qcom: sc7180-idp: Add RPMh regulators
Maulik Shah (3):
arm64: dts: qcom: sc7180: Add cmd_db reserved area
arm64: dts: qcom: sc7180: Add rpmh-rsc node
arm64: dts: qcom: sc7180: Add pdc interrupt controller
Rajendra Nayak (5):
dt-bindings: qcom: Add SC7180 bindings
arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc
dt-bindings: arm-smmu: update binding for qcom sc7180 SoC
drivers: irqchip: qcom-pdc: Move to an SoC independent compatible
dt-bindings: qcom,pdc: Add compatible for sc7180
Roja Rani Yarubandi (1):
arm64: dts: sc7180: Add qupv3_0 and qupv3_1
Taniya Das (1):
arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver
Vivek Gautam (1):
arm64: dts: sc7180: Add device node for apps_smmu
.../devicetree/bindings/arm/qcom.yaml | 6 +
.../interrupt-controller/qcom,pdc.txt | 3 +-
.../devicetree/bindings/iommu/arm,smmu.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/pm6150.dtsi | 72 ++
arch/arm64/boot/dts/qcom/pm6150l.dtsi | 31 +
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 402 ++++++
arch/arm64/boot/dts/qcom/sc7180.dtsi | 1133 +++++++++++++++++
drivers/irqchip/qcom-pdc.c | 2 +-
9 files changed, 1649 insertions(+), 2 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-idp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180.dtsi
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists