lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191106112650.8365-1-heiko.stuebner@theobroma-systems.com>
Date:   Wed,  6 Nov 2019 12:26:48 +0100
From:   Heiko Stuebner <heiko.stuebner@...obroma-systems.com>
To:     dri-devel@...ts.freedesktop.org, a.hajda@...sung.com
Cc:     hjc@...k-chips.com, robh+dt@...nel.org, mark.rutland@....com,
        narmstrong@...libre.com, Laurent.pinchart@...asonboard.com,
        jonas@...boo.se, jernej.skrabec@...l.net, philippe.cornu@...com,
        yannick.fertre@...com, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
        heiko@...ech.de, christoph.muellner@...obroma-systems.com,
        Heiko Stuebner <heiko.stuebner@...obroma-systems.com>
Subject: [PATCH 1/3] drm/bridge/synopsys: dsi: move phy_ops callbacks around panel enablement

If implementation-specific phy_ops need to be defined they probably
should be enabled before trying to talk to the panel and disabled only
after the panel was disabled.

Right now they are enabled last and disabled first, so might make it
impossible to talk to some panels - example for this being the px30
with an external Innosilicon dphy that needs the phy to be enabled
to transfer commands to the panel.

So move the calls appropriately.

Signed-off-by: Heiko Stuebner <heiko.stuebner@...obroma-systems.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index 675442bfc1bd..49f5600a1dea 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -797,9 +797,6 @@ static void dw_mipi_dsi_bridge_post_disable(struct drm_bridge *bridge)
 	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
 	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
 
-	if (phy_ops->power_off)
-		phy_ops->power_off(dsi->plat_data->priv_data);
-
 	/*
 	 * Switch to command mode before panel-bridge post_disable &
 	 * panel unprepare.
@@ -816,6 +813,9 @@ static void dw_mipi_dsi_bridge_post_disable(struct drm_bridge *bridge)
 	 */
 	dsi->panel_bridge->funcs->post_disable(dsi->panel_bridge);
 
+	if (phy_ops->power_off)
+		phy_ops->power_off(dsi->plat_data->priv_data);
+
 	if (dsi->slave) {
 		dw_mipi_dsi_disable(dsi->slave);
 		clk_disable_unprepare(dsi->slave->pclk);
@@ -882,6 +882,9 @@ static void dw_mipi_dsi_mode_set(struct dw_mipi_dsi *dsi,
 
 	/* Switch to cmd mode for panel-bridge pre_enable & panel prepare */
 	dw_mipi_dsi_set_mode(dsi, 0);
+
+	if (phy_ops->power_on)
+		phy_ops->power_on(dsi->plat_data->priv_data);
 }
 
 static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
@@ -898,15 +901,11 @@ static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
 static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
 {
 	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
-	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
 
 	/* Switch to video mode for panel-bridge enable & panel enable */
 	dw_mipi_dsi_set_mode(dsi, MIPI_DSI_MODE_VIDEO);
 	if (dsi->slave)
 		dw_mipi_dsi_set_mode(dsi->slave, MIPI_DSI_MODE_VIDEO);
-
-	if (phy_ops->power_on)
-		phy_ops->power_on(dsi->plat_data->priv_data);
 }
 
 static enum drm_mode_status
-- 
2.23.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ