linux-kernel - [PATCH v4 0/2] pinctrl: Add new pinctrl/GPIO driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <cover.1573111648.git.rahul.tanwar@linux.intel.com>
Date:   Thu,  7 Nov 2019 15:36:43 +0800
From:   Rahul Tanwar <rahul.tanwar@...ux.intel.com>
To:     linus.walleij@...aro.org, robh+dt@...nel.org, mark.rutland@....com
Cc:     linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, robh@...nel.org,
        andriy.shevchenko@...el.com, qi-ming.wu@...el.com,
        yixin.zhu@...ux.intel.com, cheol.yong.kim@...el.com,
        Rahul Tanwar <rahul.tanwar@...ux.intel.com>
Subject: [PATCH v4 0/2] pinctrl: Add new pinctrl/GPIO driver

Hi,

This series is to add pinctrl & GPIO controller driver for a new SoC.
Patch 1 adds pinmux & GPIO controller driver.
Patch 2 adds the corresponding dt bindings YAML document.

Patches are against Linux 5.4-rc1 at below Git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git

v4:
- Correct data types for some pin config properties in dt bindings.
- Improve pattern regex as per review feedback in dt bindings.
- Remove eqbr_set_val() & set_drv_cur() reg update routines & instead
  do reg updates in eqbr_pinconf_set() routine itself.
- Add locking in few ops where it was missing.
- Rename eqbr_gpio_desc struct to eqbr_gpio_ctrl and avoid using desc
  in variable namings so as not to confuse with GPIO descriptors.
- Address code quality/convention/style related review concerns.

v3:
- Add locking for GPIO IRQ ops.
- Fix property naming mistake in dt bindings document.
- Address other code quality related review concerns.
- Fix a build error reported by kbuild test robot.
- Remove deleted structure fields from comments.

v2:
- Enable GENERIC_PINMUX_FUNCTIONS & GENERIC_PINCTRL_GROUPS and use core
  provided code for pinmux_ops & pinctrl_ops. Remove related code from
  the driver.
- Enable GENERIC_PINCONF & use core provided pinconf code. Remove related
  code from the driver.
- Use GPIOLIB_IRQCHIP framework core code instead of implementing separtely
  in the driver.
- Enable GPIO_GENERIC and switch to core provided memory mapped GPIO banks
  design. 
- Use standard pinctrl DT properties instead of custom made properties.
- Address review concerns for dt bindings document.
- Address code quality related review concerns.

v1:
- Initial version.

Rahul Tanwar (2):
  pinctrl: Add pinmux & GPIO controller driver for a new SoC
  dt-bindings: pinctrl: intel: Add for new SoC

 .../bindings/pinctrl/intel,lgm-pinctrl.yaml        | 104 +++
 drivers/pinctrl/Kconfig                            |  18 +
 drivers/pinctrl/Makefile                           |   1 +
 drivers/pinctrl/pinctrl-equilibrium.c              | 964 +++++++++++++++++++++
 drivers/pinctrl/pinctrl-equilibrium.h              | 142 +++
 5 files changed, 1229 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml
 create mode 100644 drivers/pinctrl/pinctrl-equilibrium.c
 create mode 100644 drivers/pinctrl/pinctrl-equilibrium.h

-- 
2.11.0