| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 7 Nov 2019 08:42:05 +0000
From: <Tudor.Ambarus@...rochip.com>
To: <boris.brezillon@...labora.com>, <vigneshr@...com>
CC: <miquel.raynal@...tlin.com>, <richard@....at>,
<linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<Tudor.Ambarus@...rochip.com>
Subject: [PATCH v5 5/6] mtd: spi-nor: Merge spansion Quad Enable methods
From: Tudor Ambarus <tudor.ambarus@...rochip.com>
Merge
spansion_no_read_cr_quad_enable()
spansion_read_cr_quad_enable()
into
spi_nor_sr2_bit1_quad_enable().
Reduce code duplication by introducing spi_nor_write_16bit_cr_and_check().
The Configuration Register contains bits that can be updated in future:
FREEZE, CMP. Provide a generic method that allows updating all bits
of the Configuration Register.
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@...com>
---
drivers/mtd/spi-nor/spi-nor.c | 161 +++++++++++++++++-------------------------
1 file changed, 66 insertions(+), 95 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 8c59b5220e2a..16fb3c7d0daf 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1055,6 +1055,59 @@ static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
}
/**
+ * spi_nor_write_16bit_cr_and_check() - Write the Status Register 1 and the
+ * Configuration Register in one shot. Ensure that the byte written in the
+ * Configuration Register match the received value, and that the 16-bit Write
+ * did not affect what was already in the Status Register 1.
+ * @nor: pointer to a 'struct spi_nor'.
+ * @cr: byte value to be written to the Configuration Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr)
+{
+ int ret;
+ u8 *sr_cr = nor->bouncebuf;
+ u8 sr_written;
+
+ /* Keep the current value of the Status Register 1. */
+ ret = spi_nor_read_sr(nor, sr_cr);
+ if (ret)
+ return ret;
+
+ sr_cr[1] = cr;
+
+ ret = spi_nor_write_sr(nor, sr_cr, 2);
+ if (ret)
+ return ret;
+
+ sr_written = sr_cr[0];
+
+ ret = spi_nor_read_sr(nor, sr_cr);
+ if (ret)
+ return ret;
+
+ if (sr_written != sr_cr[0]) {
+ dev_dbg(nor->dev, "SR: Read back test failed\n");
+ return -EIO;
+ }
+
+ if (nor->flags & SNOR_F_NO_READ_CR)
+ return 0;
+
+ ret = spi_nor_read_cr(nor, &sr_cr[1]);
+ if (ret)
+ return ret;
+
+ if (cr != sr_cr[1]) {
+ dev_dbg(nor->dev, "CR: read back test failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
* spi_nor_write_sr_and_check() - Write the Status Register 1 and ensure that
* the byte written match the received value without affecting other bits in the
* Status Register 1 and 2.
@@ -2051,111 +2104,29 @@ static int macronix_quad_enable(struct spi_nor *nor)
}
/**
- * spansion_no_read_cr_quad_enable() - set QE bit in Configuration Register.
- * @nor: pointer to a 'struct spi_nor'
+ * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status
+ * Register 2.
+ * @nor: pointer to a 'struct spi_nor'.
*
- * Set the Quad Enable (QE) bit in the Configuration Register.
- * This function should be used with QSPI memories not supporting the Read
- * Configuration Register (35h) instruction.
- *
- * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI
- * memories.
+ * Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories.
*
* Return: 0 on success, -errno otherwise.
*/
-static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
+static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
{
- u8 *sr_cr = nor->bouncebuf;
int ret;
- u8 sr_written;
-
- /* Keep the current value of the Status Register. */
- ret = spi_nor_read_sr(nor, sr_cr);
- if (ret)
- return ret;
-
- sr_cr[1] = SR2_QUAD_EN_BIT1;
-
- ret = spi_nor_write_sr(nor, sr_cr, 2);
- if (ret)
- return ret;
- sr_written = sr_cr[0];
-
- ret = spi_nor_read_sr(nor, sr_cr);
- if (ret)
- return ret;
-
- if (sr_cr[0] != sr_written) {
- dev_err(nor->dev, "SR: Read back test failed\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * spansion_read_cr_quad_enable() - set QE bit in Configuration Register.
- * @nor: pointer to a 'struct spi_nor'
- *
- * Set the Quad Enable (QE) bit in the Configuration Register.
- * This function should be used with QSPI memories supporting the Read
- * Configuration Register (35h) instruction.
- *
- * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI
- * memories.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spansion_read_cr_quad_enable(struct spi_nor *nor)
-{
- u8 *sr_cr = nor->bouncebuf;
- int ret;
- u8 sr_written;
+ if (nor->flags & SNOR_F_NO_READ_CR)
+ return spi_nor_write_16bit_cr_and_check(nor, SR2_QUAD_EN_BIT1);
- /* Check current Quad Enable bit value. */
- ret = spi_nor_read_cr(nor, &sr_cr[1]);
+ ret = spi_nor_read_cr(nor, nor->bouncebuf);
if (ret)
return ret;
- if (sr_cr[1] & SR2_QUAD_EN_BIT1)
+ if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)
return 0;
- sr_cr[1] |= SR2_QUAD_EN_BIT1;
-
- /* Keep the current value of the Status Register. */
- ret = spi_nor_read_sr(nor, sr_cr);
- if (ret)
- return ret;
-
- ret = spi_nor_write_sr(nor, sr_cr, 2);
- if (ret)
- return ret;
-
- sr_written = sr_cr[0];
-
- ret = spi_nor_read_sr(nor, sr_cr);
- if (ret)
- return ret;
-
- if (sr_written != sr_cr[0]) {
- dev_err(nor->dev, "SR: Read back test failed\n");
- return -EIO;
- }
-
- sr_written = sr_cr[1];
-
- /* Read back and check it. */
- ret = spi_nor_read_cr(nor, &sr_cr[1]);
- if (ret)
- return ret;
-
- if (sr_cr[1] != sr_written) {
- dev_dbg(nor->dev, "CR: Read back test failed\n");
- return -EIO;
- }
-
- return 0;
+ return spi_nor_write_16bit_cr_and_check(nor, nor->bouncebuf[0]);
}
/**
@@ -3685,7 +3656,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
* supported.
*/
nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR;
- params->quad_enable = spansion_no_read_cr_quad_enable;
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
break;
case BFPT_DWORD15_QER_SR1_BIT6:
@@ -3707,7 +3678,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
*/
nor->flags |= SNOR_F_HAS_16BIT_SR;
- params->quad_enable = spansion_read_cr_quad_enable;
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
break;
default:
@@ -4697,7 +4668,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
u8 i, erase_mask;
/* Initialize legacy flash parameters and settings. */
- params->quad_enable = spansion_read_cr_quad_enable;
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
params->set_4byte = spansion_set_4byte;
params->setup = spi_nor_default_setup;
/* Default to 16-bit Write Status (01h) Command */
--
2.9.5
Powered by blists - more mailing lists