lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed,  6 Nov 2019 21:56:15 -0300
From:   Helen Koike <helen.koike@...labora.com>
To:     linux-rockchip@...ts.infradead.org
Cc:     mark.rutland@....com, devicetree@...r.kernel.org,
        eddie.cai.linux@...il.com, mchehab@...nel.org, heiko@...ech.de,
        linux-arm-kernel@...ts.infradead.org, gregkh@...uxfoundation.org,
        jeffy.chen@...k-chips.com, zyc@...k-chips.com,
        linux-kernel@...r.kernel.org, tfiga@...omium.org,
        robh+dt@...nel.org, hans.verkuil@...co.com,
        laurent.pinchart@...asonboard.com, sakari.ailus@...ux.intel.com,
        kernel@...labora.com, ezequiel@...labora.com,
        linux-media@...r.kernel.org, jacob-chen@...wrt.com,
        zhengsq@...k-chips.com, Jacob Chen <jacob2.chen@...k-chips.com>,
        Rob Herring <robh@...nel.org>,
        Helen Koike <helen.koike@...labora.com>
Subject: [PATCH v10 09/11] media: staging: dt-bindings: Document the Rockchip ISP1 bindings

From: Jacob Chen <jacob2.chen@...k-chips.com>

Add DT bindings documentation for Rockchip ISP1

Signed-off-by: Jacob Chen <jacob2.chen@...k-chips.com>
Reviewed-by: Rob Herring <robh@...nel.org>
[refactored for upstream]
Signed-off-by: Helen Koike <helen.koike@...labora.com>

---

Changes in v10:
- unsquash

Changes in v9:
- squash
- move to staging

Changes in v8:
- fix title division style

Changes in v7:
- update document with new design and tested example

 .../bindings/media/rockchip-isp1.txt          | 71 +++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.txt

diff --git a/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.txt b/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.txt
new file mode 100644
index 000000000000..eaeb838876f5
--- /dev/null
+++ b/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.txt
@@ -0,0 +1,71 @@
+Rockchip SoC Image Signal Processing unit v1
+--------------------------------------------
+
+Rockchip ISP1 is the Camera interface for the Rockchip series of SoCs
+which contains image processing, scaling, and compression funcitons.
+
+Required properties:
+- compatible: value should be one of the following
+	"rockchip,rk3288-cif-isp";
+	"rockchip,rk3399-cif-isp";
+- reg : offset and length of the register set for the device.
+- interrupts: should contain ISP interrupt.
+- clocks: phandle to the required clocks.
+- clock-names: required clock name.
+- iommus: required a iommu node.
+- phys: the phandle for the PHY port
+- phy-names: must contain "dphy"
+
+port node
+---------
+
+The device node should contain one 'ports' child node, with children 'port'
+with child 'endpoint'.
+nodes, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt.
+
+- endpoint(mipi):
+	- remote-endpoint: Connecting to Rockchip MIPI-DPHY,
+		which is defined in rockchip-mipi-dphy.txt.
+
+The port node must contain at least one endpoint, either parallel or mipi.
+It could have multiple endpoints, but please note the hardware don't support
+two sensors work at a time, they are supposed to work asynchronously.
+
+Device node example
+-------------------
+
+	isp0: isp0@...10000 {
+		compatible = "rockchip,rk3399-cif-isp";
+		reg = <0x0 0xff910000 0x0 0x4000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_ISP0>,
+			 <&cru ACLK_ISP0>, <&cru ACLK_ISP0_WRAPPER>,
+			 <&cru HCLK_ISP0>, <&cru HCLK_ISP0_WRAPPER>;
+		clock-names = "clk_isp",
+			      "aclk_isp", "aclk_isp_wrap",
+			      "hclk_isp", "hclk_isp_wrap";
+		power-domains = <&power RK3399_PD_ISP0>;
+		iommus = <&isp0_mmu>;
+		phys = <&dphy>;
+		phy-names = "dphy";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				mipi_in_wcam: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&wcam_out>;
+					data-lanes = <1 2>;
+				};
+
+				mipi_in_ucam: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&ucam_out>;
+					data-lanes = <1>;
+				};
+			};
+		};
+	};
-- 
2.22.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ