| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a2d82f20-a559-c3b9-f7b1-0e488b75f7e6@nvidia.com>
Date: Thu, 7 Nov 2019 10:32:17 +0000
From: Jon Hunter <jonathanh@...dia.com>
To: Chris Packham <chris.packham@...iedtelesis.co.nz>,
<linus.walleij@...aro.org>, <bgolaszewski@...libre.com>,
<robh+dt@...nel.org>, <mark.rutland@....com>, <rjui@...adcom.com>,
<sbranden@...adcom.com>, <bcm-kernel-feedback-list@...adcom.com>
CC: <linux-gpio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
linux-tegra <linux-tegra@...r.kernel.org>
Subject: Re: [PATCH v4 2/2] gpio: Add xgs-iproc driver
On 24/10/2019 21:27, Chris Packham wrote:
> This driver supports the Chip Common A GPIO controller present on a
> number of Broadcom switch ASICs with integrated SoCs. The controller is
> similar to the pinctrl-nsp-gpio and pinctrl-iproc-gpio blocks but
> different enough that a separate driver is required.
>
> This has been ported from Broadcom's XLDK 5.0.3 retaining only the CCA
> support (pinctrl-iproc-gpio covers CCB).
>
> Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
> ---
>
> Notes:
> Changes in v4:
> - rename the config option to GPIO_BCM_XGS_IPROC and place alphabetically
> - sort #includes alphabetically
>
> Changes in v3:
> - prefix local #defines with 'IPROC'
> - use {readl,writel}_relaxed
> - remove unnecessary headers
> - actually use spinlock to guard hardware accesses
>
> Changes in v2:
> - use more of the generic infrastructure for gpio chips
> - handling the root interrupt is still done manually due to sharing with uart0.
>
> drivers/gpio/Kconfig | 9 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-xgs-iproc.c | 321 ++++++++++++++++++++++++++++++++++
> 3 files changed, 331 insertions(+)
> create mode 100644 drivers/gpio/gpio-xgs-iproc.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 38e096e6925f..04396787fbb0 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -147,6 +147,15 @@ config GPIO_BCM_KONA
> help
> Turn on GPIO support for Broadcom "Kona" chips.
>
> +config GPIO_BCM_XGS_IPROC
> + tristate "BRCM XGS iProc GPIO support"
> + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
> + select GPIO_GENERIC
> + select GPIOLIB_IRQCHIP
> + default ARCH_BCM_IPROC
> + help
> + Say yes here to enable GPIO support for Broadcom XGS iProc SoCs.
> +
> config GPIO_BRCMSTB
> tristate "BRCMSTB GPIO support"
> default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index d2fd19c15bae..8725d158a964 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
> obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o
> obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
> obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
> +obj-$(CONFIG_GPIO_BCM_XGS_IPROC) += gpio-xgs-iproc.o
> obj-$(CONFIG_GPIO_BD70528) += gpio-bd70528.o
> obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o
> obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
> diff --git a/drivers/gpio/gpio-xgs-iproc.c b/drivers/gpio/gpio-xgs-iproc.c
> new file mode 100644
> index 000000000000..a3fdd95cc9e6
> --- /dev/null
> +++ b/drivers/gpio/gpio-xgs-iproc.c
...
> +static const struct of_device_id bcm_iproc_gpio_of_match[] __initconst = {
> + { .compatible = "brcm,iproc-gpio-cca" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, bcm_iproc_gpio_of_match);
This patch is generating the following warning when built as a module ...
MODPOST vmlinux.o
WARNING: vmlinux.o(.data+0x834d0): Section mismatch in reference from the variable bcm_iproc_gpio_driver to the variable .init.rodata:bcm_iproc_gpio_of_match
The variable bcm_iproc_gpio_driver references
the variable __initconst bcm_iproc_gpio_of_match
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
This then leads to the following crash on boot ...
[ 13.586799] ------------[ cut here ]------------
[ 13.591406] Ignoring spurious kernel translation fault at virtual address ffff80001139a990
[ 13.599659] WARNING: CPU: 0 PID: 5 at /home/jonathanh/workdir/tegra/mlt-linux_next/kernel/arch/arm64/mm/fault.c:302 __do_kernel_fault+0xd0/0x128
[ 13.612582] Modules linked in: ina3221(+) ip_tables x_tables ipv6 nf_defrag_ipv6
[ 13.619966] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G S 5.4.0-rc1-00031-g6a41b6c5fc20 #11
[ 13.629509] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT)
[ 13.635416] Workqueue: events deferred_probe_work_func
[ 13.640540] pstate: 40000085 (nZcv daIf -PAN -UAO)
[ 13.645318] pc : __do_kernel_fault+0xd0/0x128
[ 13.649663] lr : __do_kernel_fault+0xd0/0x128
[ 13.654006] sp : ffff800010073a10
[ 13.657308] x29: ffff800010073a10 x28: ffff0001f5ccb700
[ 13.662605] x27: ffff0001f7185730 x26: ffff8000117aff28
[ 13.667901] x25: 0000000000000000 x24: 0000000000000025
[ 13.673198] x23: 0000000060000085 x22: ffff80001139a990
[ 13.678495] x21: ffff800010073a80 x20: 0000000000000025
[ 13.683792] x19: 0000000096000007 x18: ffffffffffffffff
[ 13.689089] x17: 0000000000000000 x16: 0000000000000000
[ 13.694386] x15: ffff8000117998c8 x14: 3131303030386666
[ 13.699681] x13: 6666207373657264 x12: 6461206c61757472
[ 13.704978] x11: 697620746120746c x10: 756166206e6f6974
[ 13.710274] x9 : 616c736e61727420 x8 : 6c656e72656b2073
[ 13.715570] x7 : 0000000000000160 x6 : ffff0001f717c180
[ 13.720867] x5 : 0000000000000001 x4 : ffff0001f717c180
[ 13.726162] x3 : 0000000000000006 x2 : 0000000000000007
[ 13.731458] x1 : aa4a2528bb290a00 x0 : 0000000000000000
[ 13.736756] Call trace:
[ 13.739194] __do_kernel_fault+0xd0/0x128
[ 13.743192] do_translation_fault+0x40/0x70
[ 13.747363] do_mem_abort+0x3c/0x98
[ 13.750839] el1_da+0x20/0x94
[ 13.753799] __of_match_node+0x40/0x88
[ 13.757535] of_match_node+0x3c/0x60
[ 13.761099] of_match_device+0x18/0x28
[ 13.764837] platform_match+0x4c/0xd0
[ 13.768488] __device_attach_driver+0x34/0xc0
[ 13.772832] bus_for_each_drv+0x70/0xc8
[ 13.776655] __device_attach+0xdc/0x140
[ 13.780479] device_initial_probe+0x10/0x18
[ 13.784649] bus_probe_device+0x94/0xa0
[ 13.788471] deferred_probe_work_func+0x6c/0xa0
[ 13.792990] process_one_work+0x1c8/0x358
[ 13.796986] worker_thread+0x48/0x460
[ 13.800637] kthread+0xf0/0x120
[ 13.803767] ret_from_fork+0x10/0x1c
[ 13.807331] ---[ end trace ce728f2656bbae67 ]---
I think we need to drop the __initconst from the match table.
I will send a patch.
Cheers
Jon
--
nvpublic
Powered by blists - more mailing lists