| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHCN7xLvuj_LkvOV3YG5=0MZYsohbQArE0UCZx6pcRPwM5pkYg@mail.gmail.com>
Date: Fri, 8 Nov 2019 14:08:29 -0600
From: Adam Ford <aford173@...il.com>
To: "H. Nikolaus Schaller" <hns@...delico.com>
Cc: Benoît Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
André Roth <neolynx@...il.com>,
Mark Rutland <mark.rutland@....com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
Enric Balletbo i Serra <eballetbo@...il.com>,
Javier Martinez Canillas <javier@...hile0.org>,
Roger Quadros <rogerq@...com>,
Teresa Remmet <t.remmet@...tec.de>,
Linux-OMAP <linux-omap@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-pm@...r.kernel.org,
Discussions about the Letux Kernel
<letux-kernel@...nphoenux.org>, kernel@...a-handheld.com,
arm-soc <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed
binned / 720MHz grade bits
On Wed, Sep 11, 2019 at 12:47 PM H. Nikolaus Schaller <hns@...delico.com> wrote:
>
> CHANGES V3:
> * make omap36xx control the abb-ldo and properly switch mode
> (suggested by Adam Ford <aford173@...il.com>)
> * add a note about enabling the turbo-mode OPPs
>
> PATCH V2 2019-09-07 19:46:58:
> * fix ti-cpufreq to properly describe which compatible string is legacy
> * add some reviewed-by and acked-by Tony Lindgren <tony@...mide.com>
> * include am3517 patches by Adam Ford <aford173@...il.com>
> * review opp-suspend; and add turbo-mode; opp properties
> * add a note how to disable an OPP in a board.dts file
>
> PATCH V1 2019-09-07 08:56:19:
> * fix typo in omap3-ldp.dts
> (reported by Tony Lindgren <tony@...mide.com>)
> * extend commit message to describe the bit patterns needed
> for opp-supported-hw
> * add error check to ioremap()
> (suggested by Christ van Willegen <cvwillegen@...il.com>)
> * update Documentation/devicetree/bindings/arm/omap/omap.txt
> * change bulk update to use "ti,omap3430" and "ti,omap3630"
> * update OPP4 of omap3430 to 1275 mV since it was not a valid
> voltage for the twl4030 driver (reported by Tony Lindgren
> <tony@...mide.com>)
>
> RFC V2 2019-09-04 10:53:43:
> * merge separate patch to remove opp-v1 table from n950-n9 into
> the general omap3xxx.dtsi patch
> (suggested by Viresh Kumar <viresh.kumar@...aro.org>)
> * add legacy compatibility to ti,omap3430 and ti,omap3630 for
> the ti-cpufreq driver
> * make driver and omap3xxx.dtsi patches pass checkpatch
> * add bulk patch to explicitly define compatibility to ti,omap3430
> and ti,omap36xx in addition to ti,omap3 of all in-tree boards
> where it was missing
>
> RFC V1 2019-09-02 12:55:55:
>
> This patch set converts the omap3 opp tables to opp-v2 format
> and extends the ti-cpufreq to support omap3.
>
> It adds 720 MHz (omap34xx) and 1 GHz (omap36xx) OPPs but
> tells the ti-cpufreq driver to disable them if the speed
> binned / 720MHz grade eFuse bits indicate that the chip
> is not rated for that speed.
>
> It has been tested (for chip variant detection, not reliability
> of the high speed OPPs) on:
>
> * BeagleBoard C2 (omap3530 600MHz)
> * BeagleBoard XM B (dm3730 800MHz)
> * GTA04A4 (dm3730 800MHz)
> * GTA04A5 (dm3730 1GHz)
>
>
> Adam Ford (2):
> cpufreq: ti-cpufreq: Add support for AM3517
> ARM: dts: Add OPP-V2 table for AM3517
>
Nikolaus,
I am getting some notices sent to me when I apply your series. It
works, but I want to clean up the notice. Can you suggest what might
cause this:
debugfs: Directory 'cpu0-cpu0' with parent
'48070000.i2c:twl@48:regulator-vdd1-VDD1' already present!
It wasn't present before your series. It's not a big deal, but I'd
like to quiet down the messages if I can.
Thanks.
adam
> H. Nikolaus Schaller (6):
> cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
> ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for
> DTS: bindings: omap: update bindings documentation
> ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430
> or ti,omap3630 or ti,am3517
> cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in
> multi_regulator mode
> ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo
>
> .../devicetree/bindings/arm/omap/omap.txt | 30 +++--
> .../bindings/cpufreq/ti-cpufreq.txt | 6 +-
> arch/arm/boot/dts/am3517.dtsi | 31 +++++
> arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
> .../boot/dts/logicpd-som-lv-35xx-devkit.dts | 2 +-
> .../boot/dts/logicpd-torpedo-35xx-devkit.dts | 2 +-
> arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
> arch/arm/boot/dts/omap3-beagle.dts | 2 +-
> arch/arm/boot/dts/omap3-cm-t3530.dts | 2 +-
> arch/arm/boot/dts/omap3-cm-t3730.dts | 2 +-
> arch/arm/boot/dts/omap3-devkit8000-lcd43.dts | 2 +-
> arch/arm/boot/dts/omap3-devkit8000-lcd70.dts | 2 +-
> arch/arm/boot/dts/omap3-devkit8000.dts | 2 +-
> arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
> arch/arm/boot/dts/omap3-ha-lcd.dts | 2 +-
> arch/arm/boot/dts/omap3-ha.dts | 2 +-
> arch/arm/boot/dts/omap3-igep0020-rev-f.dts | 2 +-
> arch/arm/boot/dts/omap3-igep0020.dts | 2 +-
> arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 2 +-
> arch/arm/boot/dts/omap3-igep0030.dts | 2 +-
> arch/arm/boot/dts/omap3-ldp.dts | 2 +-
> arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
> arch/arm/boot/dts/omap3-lilly-dbb056.dts | 2 +-
> arch/arm/boot/dts/omap3-n9.dts | 2 +-
> arch/arm/boot/dts/omap3-n950-n9.dtsi | 7 --
> arch/arm/boot/dts/omap3-n950.dts | 2 +-
> .../arm/boot/dts/omap3-overo-storm-alto35.dts | 2 +-
> .../boot/dts/omap3-overo-storm-chestnut43.dts | 2 +-
> .../boot/dts/omap3-overo-storm-gallop43.dts | 2 +-
> .../arm/boot/dts/omap3-overo-storm-palo35.dts | 2 +-
> .../arm/boot/dts/omap3-overo-storm-palo43.dts | 2 +-
> .../arm/boot/dts/omap3-overo-storm-summit.dts | 2 +-
> arch/arm/boot/dts/omap3-overo-storm-tobi.dts | 2 +-
> .../boot/dts/omap3-overo-storm-tobiduo.dts | 2 +-
> arch/arm/boot/dts/omap3-pandora-1ghz.dts | 2 +-
> arch/arm/boot/dts/omap3-sbc-t3530.dts | 2 +-
> arch/arm/boot/dts/omap3-sbc-t3730.dts | 2 +-
> arch/arm/boot/dts/omap3-sniper.dts | 2 +-
> arch/arm/boot/dts/omap3-thunder.dts | 2 +-
> arch/arm/boot/dts/omap3-zoom3.dts | 2 +-
> arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
> arch/arm/boot/dts/omap34xx.dtsi | 66 ++++++++--
> arch/arm/boot/dts/omap36xx.dtsi | 65 ++++++++--
> drivers/cpufreq/cpufreq-dt-platdev.c | 2 +-
> drivers/cpufreq/ti-cpufreq.c | 119 +++++++++++++++++-
> 45 files changed, 320 insertions(+), 80 deletions(-)
>
> --
> 2.19.1
>
Powered by blists - more mailing lists