[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <5d1e233b-ada9-d5b6-f8fe-0922df8a5030@ti.com>
Date: Fri, 8 Nov 2019 11:43:04 +0200
From: Tero Kristo <t-kristo@...com>
To: Roger Quadros <rogerq@...com>, <nm@...com>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 0/2] [PATCH 0/2] arm64: dts: ti: k3-j721e: Add USB ports
On 29/10/2019 13:34, Roger Quadros wrote:
> Tero,
>
> On 28/10/2019 11:37, Roger Quadros wrote:
>> Hi,
>>
>> This series enables USB 2.0 support on j721e-common-proc-board.
>>
>> The USB0 is available as a type-C port. Although it is super-speed
>> capable, we limit it to high-speed for now till SERDES PHY
>> support is added.
>>
>> USB1 is routed via on-board USB2.0 hub to 2 type-A ports. USB1
>> is used as high-speed host.
>>
>> Controller side DT binding is approved [1]. Driver [2] is yet to be
>> in USB tree. This series is safe to be picked for -next.
>
> Driver is now in Maintainer's tree.
>
> https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git/commit/?h=testing/next&id=387c359b84f71ca29c1a9fa24293c65a257f6bf5
>
>
>>
>> [1] https://lkml.org/lkml/2019/10/25/1036
>> [2] https://lkml.org/lkml/2019/10/24/371
>>
>> Series is based on top of Tero's ti-k3-next branch.
Queued up towards 5.5, thanks.
-Tero
>>
>> cheers,
>> -roger
>>
>> Roger Quadros (2):
>> arm64: dts: ti: k3-j721e-main: add USB controller nodes
>> arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports
>>
>> .../dts/ti/k3-j721e-common-proc-board.dts | 35 +++++++++++
>> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 60 +++++++++++++++++++
>> arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +
>> 3 files changed, 97 insertions(+)
>>
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists