| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191108114310.14363-75-sashal@kernel.org>
Date: Fri, 8 Nov 2019 06:42:40 -0500
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Deepak Ukey <deepak.ukey@...rochip.com>,
Viswas G <Viswas.G@...rochip.com>,
Jack Wang <jinpu.wang@...fitbricks.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
Sasha Levin <sashal@...nel.org>, linux-scsi@...r.kernel.org
Subject: [PATCH AUTOSEL 4.14 075/103] scsi: pm80xx: Fixed system hang issue during kexec boot
From: Deepak Ukey <deepak.ukey@...rochip.com>
[ Upstream commit 72349b62a571effd6faadd0600b8e657dd87afbf ]
When the firmware is not responding, execution of kexec boot causes a system
hang. When firmware assertion happened, driver get notified with interrupt
vector updated in MPI configuration table. Then, the driver will read
scratchpad register and set controller_fatal_error flag to true.
Signed-off-by: Deepak Ukey <deepak.ukey@...rochip.com>
Signed-off-by: Viswas G <Viswas.G@...rochip.com>
Acked-by: Jack Wang <jinpu.wang@...fitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/scsi/pm8001/pm8001_hwi.c | 6 +++
drivers/scsi/pm8001/pm8001_sas.c | 7 +++
drivers/scsi/pm8001/pm8001_sas.h | 1 +
drivers/scsi/pm8001/pm80xx_hwi.c | 80 +++++++++++++++++++++++++++++---
drivers/scsi/pm8001/pm80xx_hwi.h | 3 ++
5 files changed, 91 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 10546faac58c6..f374abfb7f1f8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1479,6 +1479,12 @@ u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
} else {
u32 producer_index;
void *pi_virt = circularQ->pi_virt;
+ /* spurious interrupt during setup if
+ * kexec-ing and driver doing a doorbell access
+ * with the pre-kexec oq interrupt setup
+ */
+ if (!pi_virt)
+ break;
/* Update the producer index from SPC */
producer_index = pm8001_read_32(pi_virt);
circularQ->producer_index = cpu_to_le32(producer_index);
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index d1fcd21f7f7dd..e64a13f0bce17 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -374,6 +374,13 @@ static int pm8001_task_exec(struct sas_task *task,
return 0;
}
pm8001_ha = pm8001_find_ha_by_dev(task->dev);
+ if (pm8001_ha->controller_fatal_error) {
+ struct task_status_struct *ts = &t->task_status;
+
+ ts->resp = SAS_TASK_UNDELIVERED;
+ t->task_done(t);
+ return 0;
+ }
PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
spin_lock_irqsave(&pm8001_ha->lock, flags);
do {
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index e81a8fa7ef1a8..e954ecd3f6c08 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -529,6 +529,7 @@ struct pm8001_hba_info {
u32 logging_level;
u32 fw_status;
u32 smp_exp_mode;
+ bool controller_fatal_error;
const struct firmware *fw_image;
struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
};
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index eb4fee61df729..9edd61c063a1a 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -572,6 +572,9 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size);
pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity);
+ /* Update Fatal error interrupt vector */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |=
+ ((pm8001_ha->number_of_intr - 1) << 8);
pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
pm8001_mw32(address, MAIN_EVENT_CRC_CHECK,
@@ -1099,6 +1102,9 @@ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
return -EBUSY;
}
+ /* Initialize the controller fatal error flag */
+ pm8001_ha->controller_fatal_error = false;
+
/* Initialize pci space address eg: mpi offset */
init_pci_device_addresses(pm8001_ha);
init_default_table_values(pm8001_ha);
@@ -1207,13 +1213,17 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
u32 bootloader_state;
u32 ibutton0, ibutton1;
- /* Check if MPI is in ready state to reset */
- if (mpi_uninit_check(pm8001_ha) != 0) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MPI state is not ready\n"));
- return -1;
+ /* Process MPI table uninitialization only if FW is ready */
+ if (!pm8001_ha->controller_fatal_error) {
+ /* Check if MPI is in ready state to reset */
+ if (mpi_uninit_check(pm8001_ha) != 0) {
+ regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "MPI state is not ready scratch1 :0x%x\n",
+ regval));
+ return -1;
+ }
}
-
/* checked for reset register normal state; 0x0 */
regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
PM8001_INIT_DBG(pm8001_ha,
@@ -3717,6 +3727,46 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
}
+static void print_scratchpad_registers(struct pm8001_hba_info *pm8001_ha)
+{
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_SCRATCH_PAD_1:0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_SCRATCH_PAD_2: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_SCRATCH_PAD_3: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_1: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_2: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_3: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_4: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_5: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_6)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_7)));
+}
+
static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
struct outbound_queue_table *circularQ;
@@ -3724,10 +3774,28 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
u8 uninitialized_var(bc);
u32 ret = MPI_IO_STATUS_FAIL;
unsigned long flags;
+ u32 regval;
+ if (vec == (pm8001_ha->number_of_intr - 1)) {
+ regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
+ SCRATCH_PAD_MIPSALL_READY) {
+ pm8001_ha->controller_fatal_error = true;
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "Firmware Fatal error! Regval:0x%x\n", regval));
+ print_scratchpad_registers(pm8001_ha);
+ return ret;
+ }
+ }
spin_lock_irqsave(&pm8001_ha->lock, flags);
circularQ = &pm8001_ha->outbnd_q_tbl[vec];
do {
+ /* spurious interrupt during setup if kexec-ing and
+ * driver doing a doorbell access w/ the pre-kexec oq
+ * interrupt setup.
+ */
+ if (!circularQ->pi_virt)
+ break;
ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
if (MPI_IO_STATUS_SUCCESS == ret) {
/* process the outbound message */
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 7a443bad61634..411b414a9a0ef 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -1288,6 +1288,9 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
#define SCRATCH_PAD_BOOT_LOAD_SUCCESS 0x0
#define SCRATCH_PAD_IOP0_READY 0xC00
#define SCRATCH_PAD_IOP1_READY 0x3000
+#define SCRATCH_PAD_MIPSALL_READY (SCRATCH_PAD_IOP1_READY | \
+ SCRATCH_PAD_IOP0_READY | \
+ SCRATCH_PAD_RAAE_READY)
/* boot loader state */
#define SCRATCH_PAD1_BOOTSTATE_MASK 0x70 /* Bit 4-6 */
--
2.20.1
Powered by blists - more mailing lists