linux-kernel - [PATCH AUTOSEL 4.14 097/109] scsi: NCR5380: Don't call dsprintk() following reselection interrupt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191110024541.31567-97-sashal@kernel.org>
Date:   Sat,  9 Nov 2019 21:45:29 -0500
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Finn Thain <fthain@...egraphics.com.au>,
        Michael Schmitz <schmitzmic@...il.com>,
        "Martin K . Petersen" <martin.petersen@...cle.com>,
        Sasha Levin <sashal@...nel.org>, linux-scsi@...r.kernel.org
Subject: [PATCH AUTOSEL 4.14 097/109] scsi: NCR5380: Don't call dsprintk() following reselection interrupt

From: Finn Thain <fthain@...egraphics.com.au>

[ Upstream commit 08267216b3f8aa5adc204bdccf8deb72c1cd7665 ]

The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION",

    ... The reselected initiator shall then assert the BSY signal
    within a selection abort time of its most recent detection of being
    reselected; this is required for correct operation of the time-out
    procedure.

The selection abort time is only 200 us which may be insufficient time for a
printk() call. Move the diagnostics to the error paths.

Tested-by: Michael Schmitz <schmitzmic@...il.com>
Signed-off-by: Finn Thain <fthain@...egraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/scsi/NCR5380.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index b13290b3e5d38..48f123601f575 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2021,8 +2021,6 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		return;
 	}
 
-	dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
-
 	/*
 	 * At this point, we have detected that our SCSI ID is on the bus,
 	 * SEL is true and BSY was false for at least one bus settle delay
@@ -2035,6 +2033,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
 	if (NCR5380_poll_politely(hostdata,
 	                          STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
+		shost_printk(KERN_ERR, instance, "reselect: !SEL timeout\n");
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 		return;
 	}
@@ -2046,6 +2045,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 
 	if (NCR5380_poll_politely(hostdata,
 	                          STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+		shost_printk(KERN_ERR, instance, "reselect: REQ timeout\n");
 		do_abort(instance);
 		return;
 	}
-- 
2.20.1