linux-kernel - [PATCH AUTOSEL 4.19 172/191] scsi: NCR5380: Check for invalid reselection target

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191110024013.29782-172-sashal@kernel.org>
Date:   Sat,  9 Nov 2019 21:39:54 -0500
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Finn Thain <fthain@...egraphics.com.au>,
        Michael Schmitz <schmitzmic@...il.com>,
        "Martin K . Petersen" <martin.petersen@...cle.com>,
        Sasha Levin <sashal@...nel.org>, linux-scsi@...r.kernel.org
Subject: [PATCH AUTOSEL 4.19 172/191] scsi: NCR5380: Check for invalid reselection target

From: Finn Thain <fthain@...egraphics.com.au>

[ Upstream commit 7ef55f6744c45e3d7c85a3f74ada39b67ac741dd ]

The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION", that "the
initiator shall not respond to a RESELECTION phase if other than two SCSI ID
bits are on the DATA BUS." This issue (too many bits set) has been observed in
the wild, so add a check.

Tested-by: Michael Schmitz <schmitzmic@...il.com>
Signed-off-by: Finn Thain <fthain@...egraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/scsi/NCR5380.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 90136942f4882..c67f476447372 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2008,6 +2008,11 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 	NCR5380_write(MODE_REG, MR_BASE);
 
 	target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
+	if (!target_mask || target_mask & (target_mask - 1)) {
+		shost_printk(KERN_WARNING, instance,
+			     "reselect: bad target_mask 0x%02x\n", target_mask);
+		return;
+	}
 
 	dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
 
-- 
2.20.1