| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191111232122.GG3108315@builder>
Date: Mon, 11 Nov 2019 15:21:22 -0800
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Tero Kristo <t-kristo@...com>
Cc: ohad@...ery.com, linux-remoteproc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
s-anna@...com
Subject: Re: [PATCH 05/17] remoteproc/omap: Add support to parse internal
memories from DT
On Mon 28 Oct 05:42 PDT 2019, Tero Kristo wrote:
> From: Suman Anna <s-anna@...com>
>
> The OMAP remoteproc driver has been enhanced to parse and store
> the kernel mappings for different internal RAM memories that may
> be present within each remote processor IP subsystem. Different
> devices have varying memories present on current SoCs. The current
> support handles the L2RAM for all IPU devices on OMAP4+ SoCs. The
> DSPs on OMAP4/OMAP5 only have Unicaches and do not have any L1 or
> L2 RAM memories.
>
> IPUs are expected to have the L2RAM at a fixed device address of
> 0x20000000, based on the current limitations on Attribute MMU
> configurations.
>
> NOTE:
> The current logic doesn't handle the parsing of memories for DRA7
> remoteproc devices, and will be added alongside the DRA7 support.
>
> Signed-off-by: Suman Anna <s-anna@...com>
> Signed-off-by: Tero Kristo <t-kristo@...com>
> ---
> drivers/remoteproc/omap_remoteproc.c | 69 ++++++++++++++++++++++++++++
> 1 file changed, 69 insertions(+)
>
> diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
> index a10377547533..bbd6ff360e10 100644
> --- a/drivers/remoteproc/omap_remoteproc.c
> +++ b/drivers/remoteproc/omap_remoteproc.c
> @@ -29,6 +29,8 @@
> #include "omap_remoteproc.h"
> #include "remoteproc_internal.h"
>
> +#define OMAP_RPROC_IPU_L2RAM_DEV_ADDR (0x20000000)
> +
> /**
> * struct omap_rproc_boot_data - boot data structure for the DSP omap rprocs
> * @syscon: regmap handle for the system control configuration module
> @@ -39,11 +41,27 @@ struct omap_rproc_boot_data {
> unsigned int boot_reg;
> };
>
> +/*
> + * struct omap_rproc_mem - internal memory structure
> + * @cpu_addr: MPU virtual address of the memory region
> + * @bus_addr: bus address used to access the memory region
> + * @dev_addr: device address of the memory region from DSP view
> + * @size: size of the memory region
> + */
> +struct omap_rproc_mem {
> + void __iomem *cpu_addr;
> + phys_addr_t bus_addr;
> + u32 dev_addr;
> + size_t size;
> +};
> +
> /**
> * struct omap_rproc - omap remote processor state
> * @mbox: mailbox channel handle
> * @client: mailbox client to request the mailbox channel
> * @boot_data: boot data structure for setting processor boot address
> + * @mem: internal memory regions data
> + * @num_mems: number of internal memory regions
> * @rproc: rproc handle
> * @reset: reset handle
> */
> @@ -51,6 +69,8 @@ struct omap_rproc {
> struct mbox_chan *mbox;
> struct mbox_client client;
> struct omap_rproc_boot_data *boot_data;
> + struct omap_rproc_mem *mem;
> + int num_mems;
> struct rproc *rproc;
> struct reset_control *reset;
> };
> @@ -307,6 +327,51 @@ static int omap_rproc_get_boot_data(struct platform_device *pdev,
> return 0;
> }
>
> +static int omap_rproc_of_get_internal_memories(struct platform_device *pdev,
> + struct rproc *rproc)
> +{
> + static const char * const mem_names[] = {"l2ram"};
> + struct device_node *np = pdev->dev.of_node;
> + struct omap_rproc *oproc = rproc->priv;
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + int num_mems;
> + int i;
> +
> + /* OMAP4 and OMAP5 DSPs do not have support for flat SRAM */
> + if (of_device_is_compatible(np, "ti,omap4-dsp") ||
> + of_device_is_compatible(np, "ti,omap5-dsp"))
> + return 0;
> +
> + num_mems = ARRAY_SIZE(mem_names);
> + oproc->mem = devm_kcalloc(dev, num_mems, sizeof(*oproc->mem),
> + GFP_KERNEL);
> + if (!oproc->mem)
> + return -ENOMEM;
> +
> + for (i = 0; i < num_mems; i++) {
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + mem_names[i]);
> + oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
> + if (IS_ERR(oproc->mem[i].cpu_addr)) {
> + dev_err(dev, "failed to parse and map %s memory\n",
> + mem_names[i]);
> + return PTR_ERR(oproc->mem[i].cpu_addr);
> + }
> + oproc->mem[i].bus_addr = res->start;
> + oproc->mem[i].dev_addr = OMAP_RPROC_IPU_L2RAM_DEV_ADDR;
Presumably this means that mem_names[] will only ever be {"l2ram"} ?
This would imply that you can either remove the loop or you should
generalize this for dev_addr as well.
Apart from that, this looks good.
Regards,
Bjorn
> + oproc->mem[i].size = resource_size(res);
> +
> + dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %p da 0x%x\n",
> + mem_names[i], &oproc->mem[i].bus_addr,
> + oproc->mem[i].size, oproc->mem[i].cpu_addr,
> + oproc->mem[i].dev_addr);
> + }
> + oproc->num_mems = num_mems;
> +
> + return 0;
> +}
> +
> static int omap_rproc_probe(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> @@ -346,6 +411,10 @@ static int omap_rproc_probe(struct platform_device *pdev)
> /* All existing OMAP IPU and DSP processors have an MMU */
> rproc->has_iommu = true;
>
> + ret = omap_rproc_of_get_internal_memories(pdev, rproc);
> + if (ret)
> + goto free_rproc;
> +
> ret = omap_rproc_get_boot_data(pdev, rproc);
> if (ret)
> goto free_rproc;
> --
> 2.17.1
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists