linux-kernel - [PATCH] usbip: Fix uninitialized symbol 'nents' in stub_recv_cmd

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191111141035.27788-1-suwan.kim027@gmail.com>
Date:   Mon, 11 Nov 2019 23:10:35 +0900
From:   Suwan Kim <suwan.kim027@...il.com>
To:     shuah@...nel.org, gregkh@...uxfoundation.org
Cc:     linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        dan.carpenter@...cle.com, valentina.manea.m@...il.com,
        Suwan Kim <suwan.kim027@...il.com>,
        kbuild test robot <lkp@...el.com>
Subject: [PATCH] usbip: Fix uninitialized symbol 'nents' in stub_recv_cmd_submit()

Smatch reported that nents is not initialized and used in
stub_recv_cmd_submit(). nents is currently initialized by sgl_alloc()
and used to allocate multiple URBs when host controller doesn't
support scatter-gather DMA. The use of uninitialized nents means that
buf_len is zero and use_sg is true. But buffer length should not be
zero when an URB uses scatter-gather DMA.

To prevent this situation, add the conditional that checks buf_len
and use_sg. And move the use of nents right after the sgl_alloc() to
avoid the use of uninitialized nents.

If the error occurs, it adds SDEV_EVENT_ERROR_MALLOC and stub_priv
will be released by stub event handler and connection will be shut
down.

Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver")
Reported-by: kbuild test robot <lkp@...el.com>
Reported-by: Dan Carpenter <dan.carpenter@...cle.com>
Signed-off-by: Suwan Kim <suwan.kim027@...il.com>
---
 drivers/usb/usbip/stub_rx.c | 50 ++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
index 66edfeea68fe..e2b019532234 100644
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -470,18 +470,50 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
 	if (pipe == -1)
 		return;
 
+	/*
+	 * Smatch reported the error case where use_sg is true and buf_len is 0.
+	 * In this case, It adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be
+	 * released by stub event handler and connection will be shut down.
+	 */
 	priv = stub_priv_alloc(sdev, pdu);
 	if (!priv)
 		return;
 
 	buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
 
+	if (use_sg && !buf_len) {
+		dev_err(&udev->dev, "sg buffer with zero length\n");
+		goto err_malloc;
+	}
+
 	/* allocate urb transfer buffer, if needed */
 	if (buf_len) {
 		if (use_sg) {
 			sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
 			if (!sgl)
 				goto err_malloc;
+
+			/* Check if the server's HCD supports SG */
+			if (!udev->bus->sg_tablesize) {
+				/*
+				 * If the server's HCD doesn't support SG, break
+				 * a single SG request into several URBs and map
+				 * each SG list entry to corresponding URB
+				 * buffer. The previously allocated SG list is
+				 * stored in priv->sgl (If the server's HCD
+				 * support SG, SG list is stored only in
+				 * urb->sg) and it is used as an indicator that
+				 * the server split single SG request into
+				 * several URBs. Later, priv->sgl is used by
+				 * stub_complete() and stub_send_ret_submit() to
+				 * reassemble the divied URBs.
+				 */
+				support_sg = 0;
+				num_urbs = nents;
+				priv->completed_urbs = 0;
+				pdu->u.cmd_submit.transfer_flags &=
+								~URB_DMA_MAP_SG;
+			}
 		} else {
 			buffer = kzalloc(buf_len, GFP_KERNEL);
 			if (!buffer)
@@ -489,24 +521,6 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
 		}
 	}
 
-	/* Check if the server's HCD supports SG */
-	if (use_sg && !udev->bus->sg_tablesize) {
-		/*
-		 * If the server's HCD doesn't support SG, break a single SG
-		 * request into several URBs and map each SG list entry to
-		 * corresponding URB buffer. The previously allocated SG
-		 * list is stored in priv->sgl (If the server's HCD support SG,
-		 * SG list is stored only in urb->sg) and it is used as an
-		 * indicator that the server split single SG request into
-		 * several URBs. Later, priv->sgl is used by stub_complete() and
-		 * stub_send_ret_submit() to reassemble the divied URBs.
-		 */
-		support_sg = 0;
-		num_urbs = nents;
-		priv->completed_urbs = 0;
-		pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG;
-	}
-
 	/* allocate urb array */
 	priv->num_urbs = num_urbs;
 	priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL);
-- 
2.21.0