| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191112190657.GA5578@bogus>
Date: Tue, 12 Nov 2019 13:06:57 -0600
From: Rob Herring <robh@...nel.org>
To: Grygorii Strashko <grygorii.strashko@...com>
Cc: Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org,
Ilias Apalodimas <ilias.apalodimas@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
"David S . Miller" <davem@...emloft.net>,
Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
Jiri Pirko <jiri@...nulli.us>, Sekhar Nori <nsekhar@...com>,
linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
Murali Karicheri <m-karicheri2@...com>,
Ivan Vecera <ivecera@...hat.com>, devicetree@...r.kernel.org
Subject: Re: [PATCH v6 net-next 06/13] dt-bindings: net: ti: add new cpsw
switch driver bindings
On Sat, Nov 09, 2019 at 05:15:18PM +0200, Grygorii Strashko wrote:
> Add bindings for the new TI CPSW switch driver. Comparing to the legacy
> bindings (net/cpsw.txt):
> - ports definition follows DSA bindings (net/dsa/dsa.txt) and ports can be
> marked as "disabled" if not physically wired.
> - all deprecated properties dropped;
> - all legacy propertiies dropped which represent constant HW cpapbilities
> (cpdma_channels, ale_entries, bd_ram_size, mac_control, slaves,
> active_slave)
> - TI CPTS DT properties are reused as is, but grouped in "cpts" sub-node
> - TI Davinci MDIO DT bindings are reused as is, because Davinci MDIO is
> reused.
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
> ---
> .../bindings/net/ti,cpsw-switch.yaml | 245 ++++++++++++++++++
> 1 file changed, 245 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> new file mode 100644
> index 000000000000..afeb6a4f1ada
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> @@ -0,0 +1,245 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI SoC Ethernet Switch Controller (CPSW) Device Tree Bindings
> +
> +maintainers:
> + - Grygorii Strashko <grygorii.strashko@...com>
> + - Sekhar Nori <nsekhar@...com>
> +
> +description:
> + The 3-port switch gigabit ethernet subsystem provides ethernet packet
> + communication and can be configured as an ethernet switch. It provides the
> + gigabit media independent interface (GMII),reduced gigabit media
> + independent interface (RGMII), reduced media independent interface (RMII),
> + the management data input output (MDIO) for physical layer device (PHY)
> + management.
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: ti,cpsw-switch
> + - items:
> + - const: ti,am335x-cpsw-switch
> + - const: ti,cpsw-switch
> + - items:
> + - const: ti,am4372-cpsw-switch
> + - const: ti,cpsw-switch
> + - items:
> + - const: ti,dra7-cpsw-switch
> + - const: ti,cpsw-switch
> +
> + reg:
> + maxItems: 1
> + description:
> + The physical base address and size of full the CPSW module IO range
> +
> + ranges: true
> +
> + clocks:
> + maxItems: 1
> + description: CPSW functional clock
> +
> + clock-names:
> + maxItems: 1
> + items:
> + - const: fck
> +
> + interrupts:
> + maxItems: 4
Implied by 'items' list.
> + items:
> + - description: RX_THRESH interrupt
> + - description: RX interrupt
> + - description: TX interrupt
> + - description: MISC interrupt
> +
> + interrupt-names:
> + maxItems: 4
Implied by 'items' list.
> + items:
> + - const: "rx_thresh"
> + - const: "rx"
> + - const: "tx"
> + - const: "misc"
> +
> + pinctrl-names: true
> +
> + syscon:
> + $ref: /schemas/types.yaml#definitions/phandle
> + maxItems: 1
Not an array, so not needed.
> + description:
> + Phandle to the system control device node which provides access to
> + efuse IO range with MAC addresses
> +
> +
> + ethernet-ports:
> + type: object
> + properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> +
> + patternProperties:
> + "^port@[0-9]+$":
> + type: object
> + minItems: 1
> + maxItems: 2
> + description: CPSW external ports
> +
> + allOf:
> + - $ref: ethernet-controller.yaml#
> +
> + properties:
> + reg:
> + maxItems: 1
> + enum: [1, 2]
> + description: CPSW port number
> +
> + phys:
> + $ref: /schemas/types.yaml#definitions/phandle-array
> + maxItems: 1
> + description: phandle on phy-gmii-sel PHY
> +
> + label:
> + $ref: /schemas/types.yaml#/definitions/string-array
> + maxItems: 1
> + description: label associated with this port
> +
> + ti,dual-emac-pvid:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maxItems: 1
> + minimum: 1
> + maximum: 1024
> + description:
> + Specifies default PORT VID to be used to segregate
> + ports. Default value - CPSW port number.
> +
> + required:
> + - reg
> + - phys
> +
> + mdio:
> + type: object
> + allOf:
> + - $ref: "ti,davinci-mdio.yaml#"
> + description:
> + CPSW MDIO bus.
> +
> + cpts:
> + type: object
> + description:
> + The Common Platform Time Sync (CPTS) module
> +
> + properties:
> + clocks:
> + maxItems: 1
> + description: CPTS reference clock
> +
> + clock-names:
> + maxItems: 1
> + items:
> + - const: cpts
> +
> + cpts_clock_mult:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maxItems: 1
Not an array, so not needed.
Is there a set or range of values you can define?
> + description:
> + Numerator to convert input clock ticks into ns
> +
> + cpts_clock_shift:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maxItems: 1
Same comments here.
> + description:
> + Denominator to convert input clock ticks into ns.
> + Mult and shift will be calculated basing on CPTS rftclk frequency if
> + both cpts_clock_shift and cpts_clock_mult properties are not provided.
> +
> + required:
> + - clocks
> + - clock-names
> +
> +required:
> + - compatible
> + - reg
> + - ranges
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-names
> + - '#address-cells'
> + - '#size-cells'
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/dra7.h>
> +
> + mac_sw: switch@0 {
> + compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
> + reg = <0x0 0x4000>;
> + ranges = <0 0 0x4000>;
> + clocks = <&gmac_main_clk>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + syscon = <&scm_conf>;
> + inctrl-names = "default", "sleep";
> +
> + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "rx_thresh", "rx", "tx", "misc";
> +
> + ethernet-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpsw_port1: port@1 {
> + reg = <1>;
> + label = "port1";
> + mac-address = [ 00 00 00 00 00 00 ];
> + phys = <&phy_gmii_sel 1>;
> + phy-handle = <ðphy0_sw>;
> + phy-mode = "rgmii";
> + ti,dual_emac_pvid = <1>;
> + };
> +
> + cpsw_port2: port@2 {
> + reg = <2>;
> + label = "wan";
> + mac-address = [ 00 00 00 00 00 00 ];
> + phys = <&phy_gmii_sel 2>;
> + phy-handle = <ðphy1_sw>;
> + phy-mode = "rgmii";
> + ti,dual_emac_pvid = <2>;
> + };
> + };
> +
> + davinci_mdio_sw: mdio@...0 {
> + compatible = "ti,cpsw-mdio","ti,davinci_mdio";
> + reg = <0x1000 0x100>;
> + clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + bus_freq = <1000000>;
> +
> + ethphy0_sw: ethernet-phy@0 {
> + reg = <0>;
> + };
> +
> + ethphy1_sw: ethernet-phy@1 {
> + reg = <41>;
make dt_binding_check fails:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/ti,cpsw-switch.example.dt.yaml:
mdio@...0: ethernet-phy@1:reg:0:0: 41 is greater than the maximum of 31
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/ti,cpsw-switch.example.dt.yaml:
ethernet-phy@1: reg:0:0: 41 is greater than the maximum of 31
> + };
> + };
> +
> + cpts {
> + clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
> + clock-names = "cpts";
> + };
> + };
> --
> 2.17.1
>
Powered by blists - more mailing lists