linux-kernel - [PATCH v4 2/4] Bluetooth: btbcm: Support pcm configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191112230944.48716-3-abhishekpandit@chromium.org>
Date:   Tue, 12 Nov 2019 15:09:42 -0800
From:   Abhishek Pandit-Subedi <abhishekpandit@...omium.org>
To:     Marcel Holtmann <marcel@...tmann.org>,
        Johan Hedberg <johan.hedberg@...il.com>,
        Rob Herring <robh+dt@...nel.org>
Cc:     linux-bluetooth@...r.kernel.org, dianders@...omium.org,
        Abhishek Pandit-Subedi <abhishekpandit@...omium.org>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v4 2/4] Bluetooth: btbcm: Support pcm configuration

Add BCM vendor specific command to configure PCM parameters. The new
vendor opcode allows us to set the sco routing, the pcm interface rate,
and a few other pcm specific options (frame sync, sync mode, and clock
mode). See broadcom-bluetooth.txt in Documentation for more information
about valid values for those settings.

Here is an example trace where this opcode was used to configure
a BCM4354:

        < HCI Command: Vendor (0x3f|0x001c) plen 5
                01 02 00 01 01
        > HCI Event: Command Complete (0x0e) plen 4
        Vendor (0x3f|0x001c) ncmd 1
                Status: Success (0x00)

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@...omium.org>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/bluetooth/btbcm.c | 18 ++++++++++++++++++
 drivers/bluetooth/btbcm.h |  8 ++++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 2d2e6d862068..d22a2025f7e1 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -105,6 +105,24 @@ int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 }
 EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
 
+int btbcm_set_pcm_int_params(struct hci_dev *hdev,
+			     const struct bcm_set_pcm_int_params *int_params)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, 0xfc1c, 5, int_params, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "BCM: Set PCM int params failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_set_pcm_int_params);
+
 int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
 {
 	const struct hci_command_hdr *cmd;
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
index d204be8a84bf..bf9d86924787 100644
--- a/drivers/bluetooth/btbcm.h
+++ b/drivers/bluetooth/btbcm.h
@@ -54,6 +54,8 @@ struct bcm_set_pcm_format_params {
 int btbcm_check_bdaddr(struct hci_dev *hdev);
 int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
+int btbcm_set_pcm_int_params(struct hci_dev *hdev,
+			     const struct bcm_set_pcm_int_params *int_params);
 
 int btbcm_setup_patchram(struct hci_dev *hdev);
 int btbcm_setup_apple(struct hci_dev *hdev);
@@ -74,6 +76,12 @@ static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 	return -EOPNOTSUPP;
 }
 
+int btbcm_set_pcm_int_params(struct hci_dev *hdev,
+			     const struct bcm_set_pcm_int_params *int_params)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
 {
 	return -EOPNOTSUPP;
-- 
2.24.0.rc1.363.gb1bccd3e3d-goog