| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191112094125.jhcwrf3eb3wonlfn@netronome.com>
Date: Tue, 12 Nov 2019 10:41:26 +0100
From: Simon Horman <simon.horman@...ronome.com>
To: Po Liu <po.liu@....com>
Cc: Claudiu Manoil <claudiu.manoil@....com>,
"davem@...emloft.net" <davem@...emloft.net>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"vinicius.gomes@...el.com" <vinicius.gomes@...el.com>,
Vladimir Oltean <vladimir.oltean@....com>,
Alexandru Marginean <alexandru.marginean@....com>,
Xiaoliang Yang <xiaoliang.yang_1@....com>,
Roy Zang <roy.zang@....com>, Mingkai Hu <mingkai.hu@....com>,
Jerry Huang <jerry.huang@....com>, Leo Li <leoyang.li@....com>
Subject: Re: [net-next, 2/2] enetc: update TSN Qbv PSPEED set according to
adjust link speed
On Mon, Nov 11, 2019 at 04:41:39AM +0000, Po Liu wrote:
> ENETC has a register PSPEED to indicate the link speed of hardware.
> It is need to update accordingly. PSPEED field needs to be updated
> with the port speed for QBV scheduling purposes. Or else there is
> chance for gate slot not free by frame taking the MAC if PSPEED and
> phy speed not match. So update PSPEED when link adjust. This is
> implement by the adjust_link.
>
> Signed-off-by: Po Liu <Po.Liu@....com>
> Signed-off-by: Claudiu Manoil <claudiu.manoil@....com>
> Singed-off-by: Vladimir Oltean <vladimir.oltean@....com>
> ---
> drivers/net/ethernet/freescale/enetc/enetc.c | 13 +++++--
> drivers/net/ethernet/freescale/enetc/enetc.h | 7 ++++
> .../net/ethernet/freescale/enetc/enetc_pf.c | 3 ++
> .../net/ethernet/freescale/enetc/enetc_qos.c | 34 +++++++++++++++++++
> 4 files changed, 55 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
> index d58dbc2c4270..f6b00c68451b 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc.c
> @@ -742,9 +742,14 @@ void enetc_get_si_caps(struct enetc_si *si)
> si->num_rss = 0;
> val = enetc_rd(hw, ENETC_SIPCAPR0);
> if (val & ENETC_SIPCAPR0_RSS) {
> - val = enetc_rd(hw, ENETC_SIRSSCAPR);
> - si->num_rss = ENETC_SIRSSCAPR_GET_NUM_RSS(val);
> + u32 rss;
> +
> + rss = enetc_rd(hw, ENETC_SIRSSCAPR);
> + si->num_rss = ENETC_SIRSSCAPR_GET_NUM_RSS(rss);
> }
> +
> + if (val & ENETC_SIPCAPR0_QBV)
> + si->hw_features |= ENETC_SI_F_QBV;
> }
>
> static int enetc_dma_alloc_bdr(struct enetc_bdr *r, size_t bd_size)
> @@ -1314,8 +1319,12 @@ static void enetc_disable_interrupts(struct enetc_ndev_priv *priv)
>
> static void adjust_link(struct net_device *ndev)
> {
> + struct enetc_ndev_priv *priv = netdev_priv(ndev);
> struct phy_device *phydev = ndev->phydev;
>
> + if (priv->active_offloads & ENETC_F_QBV)
> + enetc_sched_speed_set(ndev);
> +
> phy_print_status(phydev);
> }
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h
> index 8676631041d5..e85e5301c578 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc.h
> +++ b/drivers/net/ethernet/freescale/enetc/enetc.h
> @@ -118,6 +118,8 @@ enum enetc_errata {
> ENETC_ERR_UCMCSWP = BIT(2),
> };
>
> +#define ENETC_SI_F_QBV (1<<0)
> +
> /* PCI IEP device data */
> struct enetc_si {
> struct pci_dev *pdev;
> @@ -133,6 +135,7 @@ struct enetc_si {
> int num_fs_entries;
> int num_rss; /* number of RSS buckets */
> unsigned short pad;
> + int hw_features;
> };
>
> #define ENETC_SI_ALIGN 32
> @@ -173,6 +176,7 @@ struct enetc_cls_rule {
> enum enetc_active_offloads {
> ENETC_F_RX_TSTAMP = BIT(0),
> ENETC_F_TX_TSTAMP = BIT(1),
> + ENETC_F_QBV = BIT(2),
> };
>
> struct enetc_ndev_priv {
> @@ -188,6 +192,8 @@ struct enetc_ndev_priv {
> u16 msg_enable;
> int active_offloads;
>
> + u32 speed; /* store speed for compare update pspeed */
struct phy_device seems to use int for speed.
Perhaps that would be a more appropriate type here,
and likewise in enetc_sched_speed_set().
> +
> struct enetc_bdr *tx_ring[16];
> struct enetc_bdr *rx_ring[16];
>
> @@ -246,3 +252,4 @@ int enetc_get_rss_table(struct enetc_si *si, u32 *table, int count);
> int enetc_set_rss_table(struct enetc_si *si, const u32 *table, int count);
> int enetc_send_cmd(struct enetc_si *si, struct enetc_cbd *cbd);
> int enetc_setup_tc_taprio(struct net_device *ndev, void *type_data);
> +void enetc_sched_speed_set(struct net_device *ndev);
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> index 7da79b816416..e7482d483b28 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> @@ -742,6 +742,9 @@ static void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
>
> ndev->priv_flags |= IFF_UNICAST_FLT;
>
> + if (si->hw_features & ENETC_SI_F_QBV)
> + priv->active_offloads |= ENETC_F_QBV;
> +
> /* pick up primary MAC address from SI */
> enetc_get_primary_mac_addr(&si->hw, ndev->dev_addr);
> }
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
> index 036bb39c7a0b..801104dd2ba6 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
> @@ -11,6 +11,40 @@ static u16 enetc_get_max_gcl_len(struct enetc_hw *hw)
> & ENETC_QBV_MAX_GCL_LEN_MASK;
> }
>
> +void enetc_sched_speed_set(struct net_device *ndev)
> +{
> + struct enetc_ndev_priv *priv = netdev_priv(ndev);
> + struct phy_device *phydev = ndev->phydev;
> + u32 old_speed = priv->speed;
> + u32 speed, pspeed;
> +
> + if (phydev->speed == old_speed)
> + return;
> +
> + speed = phydev->speed;
> + switch (speed) {
> + case SPEED_1000:
> + pspeed = ENETC_PMR_PSPEED_1000M;
> + break;
> + case SPEED_2500:
> + pspeed = ENETC_PMR_PSPEED_2500M;
> + break;
> + case SPEED_100:
> + pspeed = ENETC_PMR_PSPEED_100M;
> + break;
> + case SPEED_10:
> + default:
> + pspeed = ENETC_PMR_PSPEED_10M;
> + netdev_err(ndev, "Qbv PSPEED set speed link down.\n");
> + }
> +
> + priv->speed = speed;
> + enetc_port_wr(&priv->si->hw, ENETC_PMR,
> + (enetc_port_rd(&priv->si->hw, ENETC_PMR)
> + & (~ENETC_PMR_PSPEED_MASK))
> + | pspeed);
The above two lines could be combined.
Also, the parentheses seem unnecessary.
> +}
> +
> static int enetc_setup_taprio(struct net_device *ndev,
> struct tc_taprio_qopt_offload *admin_conf)
> {
> --
> 2.17.1
>
Powered by blists - more mailing lists