linux-kernel - Re: [PATCH] clk: at91: sam9x60-pll: adapt PMC_PLL

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 12 Nov 2019 10:38:35 +0000
From:   <Nicolas.Ferre@...rochip.com>
To:     <Eugen.Hristev@...rochip.com>, <mturquette@...libre.com>,
        <sboyd@...nel.org>, <alexandre.belloni@...tlin.com>,
        <linux-clk@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
CC:     <Ludovic.Desroches@...rochip.com>
Subject: Re: [PATCH] clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default value

On 11/11/2019 at 14:28, Eugen Hristev - M18282 wrote:
> From: Eugen Hristev <eugen.hristev@...rochip.com>
> 
> Product datasheet recommends different values for UPLL and PLLA analog control
> register.
> Adapt accordingly.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@...rochip.com>

Best regards,
   Nicolas

> ---
> 
> datasheet link http://ww1.microchip.com/downloads/en/DeviceDoc/SAM9X60-Data-Sheet-DS60001579A.pdf
> chapter 57.7.10 optimal setting of the PLLA and PLLUTMI
> 
>   drivers/clk/at91/clk-sam9x60-pll.c | 8 ++++++--
>   1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
> index 34b8178..dfb354a 100644
> --- a/drivers/clk/at91/clk-sam9x60-pll.c
> +++ b/drivers/clk/at91/clk-sam9x60-pll.c
> @@ -25,7 +25,8 @@
>   #define		PMC_PLL_CTRL1_MUL_MSK		GENMASK(30, 24)
>   
>   #define PMC_PLL_ACR	0x18
> -#define		PMC_PLL_ACR_DEFAULT		0x1b040010UL
> +#define		PMC_PLL_ACR_DEFAULT_UPLL	0x12020010UL
> +#define		PMC_PLL_ACR_DEFAULT_PLLA	0x00020010UL
>   #define		PMC_PLL_ACR_UTMIVR		BIT(12)
>   #define		PMC_PLL_ACR_UTMIBG		BIT(13)
>   #define		PMC_PLL_ACR_LOOP_FILTER_MSK	GENMASK(31, 24)
> @@ -88,7 +89,10 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
>   	}
>   
>   	/* Recommended value for PMC_PLL_ACR */
> -	val = PMC_PLL_ACR_DEFAULT;
> +	if (pll->characteristics->upll)
> +		val = PMC_PLL_ACR_DEFAULT_UPLL;
> +	else
> +		val = PMC_PLL_ACR_DEFAULT_PLLA;
>   	regmap_write(regmap, PMC_PLL_ACR, val);
>   
>   	regmap_write(regmap, PMC_PLL_CTRL1,
> 


-- 
Nicolas Ferre