lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4b311fe6-2105-c96c-f7d4-ac3535616690@baylibre.com>
Date:   Tue, 12 Nov 2019 15:26:39 +0100
From:   Neil Armstrong <narmstrong@...libre.com>
To:     Heiko Stuebner <heiko.stuebner@...obroma-systems.com>,
        dri-devel@...ts.freedesktop.org, a.hajda@...sung.com
Cc:     hjc@...k-chips.com, robh+dt@...nel.org, mark.rutland@....com,
        Laurent.pinchart@...asonboard.com, jonas@...boo.se,
        jernej.skrabec@...l.net, philippe.cornu@...com,
        yannick.fertre@...com, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
        heiko@...ech.de, christoph.muellner@...obroma-systems.com
Subject: Re: [PATCH v2 1/5] drm/bridge/synopsys: dsi: move phy_ops callbacks
 around panel enablement

On 08/11/2019 01:02, Heiko Stuebner wrote:
> If implementation-specific phy_ops need to be defined they probably
> should be enabled before trying to talk to the panel and disabled only
> after the panel was disabled.
> 
> Right now they are enabled last and disabled first, so might make it
> impossible to talk to some panels - example for this being the px30
> with an external Innosilicon dphy that needs the phy to be enabled
> to transfer commands to the panel.
> 
> So move the calls appropriately.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@...obroma-systems.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> index 675442bfc1bd..49f5600a1dea 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -797,9 +797,6 @@ static void dw_mipi_dsi_bridge_post_disable(struct drm_bridge *bridge)
>  	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>  	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
>  
> -	if (phy_ops->power_off)
> -		phy_ops->power_off(dsi->plat_data->priv_data);
> -
>  	/*
>  	 * Switch to command mode before panel-bridge post_disable &
>  	 * panel unprepare.
> @@ -816,6 +813,9 @@ static void dw_mipi_dsi_bridge_post_disable(struct drm_bridge *bridge)
>  	 */
>  	dsi->panel_bridge->funcs->post_disable(dsi->panel_bridge);
>  
> +	if (phy_ops->power_off)
> +		phy_ops->power_off(dsi->plat_data->priv_data);
> +
>  	if (dsi->slave) {
>  		dw_mipi_dsi_disable(dsi->slave);
>  		clk_disable_unprepare(dsi->slave->pclk);
> @@ -882,6 +882,9 @@ static void dw_mipi_dsi_mode_set(struct dw_mipi_dsi *dsi,
>  
>  	/* Switch to cmd mode for panel-bridge pre_enable & panel prepare */
>  	dw_mipi_dsi_set_mode(dsi, 0);
> +
> +	if (phy_ops->power_on)
> +		phy_ops->power_on(dsi->plat_data->priv_data);
>  }
>  
>  static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
> @@ -898,15 +901,11 @@ static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
>  static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
>  {
>  	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> -	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
>  
>  	/* Switch to video mode for panel-bridge enable & panel enable */
>  	dw_mipi_dsi_set_mode(dsi, MIPI_DSI_MODE_VIDEO);
>  	if (dsi->slave)
>  		dw_mipi_dsi_set_mode(dsi->slave, MIPI_DSI_MODE_VIDEO);
> -
> -	if (phy_ops->power_on)
> -		phy_ops->power_on(dsi->plat_data->priv_data);
>  }
>  
>  static enum drm_mode_status
> 

Reviewed-by: Neil Armstrong <narmstrong@...libre.com>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ