lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191112155926.16476-6-nsaenzjulienne@suse.de>
Date:   Tue, 12 Nov 2019 16:59:24 +0100
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     andrew.murray@....com, maz@...nel.org,
        linux-kernel@...r.kernel.org,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Florian Fainelli <f.fainelli@...il.com>,
        bcm-kernel-feedback-list@...adcom.com,
        Eric Anholt <eric@...olt.net>, Stefan Wahren <wahrenst@....net>
Cc:     james.quinlan@...adcom.com, mbrugger@...e.com,
        phil@...pberrypi.org, jeremy.linton@....com,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
        Bjorn Helgaas <bhelgaas@...gle.com>, linux-pci@...r.kernel.org,
        linux-rpi-kernel@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v2 5/6] PCI: brcmstb: add MSI capability

From: Jim Quinlan <james.quinlan@...adcom.com>

This commit adds MSI to the Broadcom STB PCIe host controller. It does
not add MSIX since that functionality is not in the HW.  The MSI
controller is physically located within the PCIe block, however, there
is no reason why the MSI controller could not be moved elsewhere in
the future.

Since the internal Brcmstb MSI controller is intertwined with the PCIe
controller, it is not its own platform device but rather part of the
PCIe platform device.

Signed-off-by: Jim Quinlan <james.quinlan@...adcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>

---

Changes since v1:
  - Move revision code and some registers to this patch
  - Use PCIE_MSI_IRQ_DOMAIN in Kconfig
  - Remove redundant register read from ISR
  - Fail probe on MSI init error
  - Get rid of msi_internal
  - Use bitmap family of functions
  - Use edge triggered setup
  - Add comment regarding MultiMSI
  - Simplify compose_msi_msg to avoid reg read

This is based on Jim's original submission[1] with some slight changes
regarding how pcie->msi_target_addr is decided.

[1] https://patchwork.kernel.org/patch/10605955/

 drivers/pci/controller/Kconfig        |   1 +
 drivers/pci/controller/pcie-brcmstb.c | 326 +++++++++++++++++++++++++-
 2 files changed, 326 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 486d4d570233..eb9d973ad8e5 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -285,6 +285,7 @@ config PCIE_BRCMSTB
 	bool "Broadcom Brcmstb PCIe host controller"
 	depends on ARCH_BCM2835 || COMPILE_TEST
 	depends on OF
+	depends on PCI_MSI_IRQ_DOMAIN
 	help
 	  Say Y here to enable PCIe host controller support for
 	  Broadcom STB based SoCs, like the Raspberry Pi 4.
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 8d81c5ab5979..35afd82107a7 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /* Copyright (C) 2009 - 2019 Broadcom */
 
+#include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/compiler.h>
 #include <linux/delay.h>
@@ -8,11 +9,13 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/log2.h>
 #include <linux/module.h>
+#include <linux/msi.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_pci.h>
@@ -46,13 +49,18 @@
 #define PCIE_MISC_RC_BAR2_CONFIG_LO			0x4034
 #define PCIE_MISC_RC_BAR2_CONFIG_HI			0x4038
 #define PCIE_MISC_RC_BAR3_CONFIG_LO			0x403c
+#define PCIE_MISC_MSI_BAR_CONFIG_LO			0x4044
+#define PCIE_MISC_MSI_BAR_CONFIG_HI			0x4048
+#define PCIE_MISC_MSI_DATA_CONFIG			0x404c
 #define PCIE_MISC_PCIE_CTRL				0x4064
 #define PCIE_MISC_PCIE_STATUS				0x4068
+#define PCIE_MISC_REVISION				0x406c
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT	0x4070
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI		0x4080
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI		0x4084
 #define PCIE_MISC_HARD_PCIE_HARD_DEBUG			0x4204
 #define PCIE_INTR2_CPU_BASE				0x4300
+#define PCIE_MSI_INTR2_BASE				0x4500
 
 /*
  * Broadcom STB PCIe Register Field shift and mask info. The names are from the
@@ -87,6 +95,8 @@
 #define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_SHIFT		0x4
 #define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK		0x40
 #define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_SHIFT		0x6
+#define PCIE_MISC_REVISION_MAJMIN_MASK				0xffff
+#define PCIE_MISC_REVISION_MAJMIN_SHIFT				0
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK	0xfff00000
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_SHIFT	0x14
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK	0xfff0
@@ -104,6 +114,11 @@
 #define PCIE_RGR1_SW_INIT_1_PERST_SHIFT				0x0
 
 #define BRCM_NUM_PCIE_OUT_WINS		0x4
+#define BRCM_INT_PCI_MSI_NR		32
+#define BRCM_PCIE_HW_REV_33		0x0303
+
+#define BRCM_MSI_TARGET_ADDR_LT_4GB	0x0fffffffcULL
+#define BRCM_MSI_TARGET_ADDR_GT_4GB	0xffffffffcULL
 
 #define BURST_SIZE_128			0
 
@@ -182,6 +197,33 @@ struct brcm_window {
 	dma_addr_t size;
 };
 
+struct brcm_msi {
+	struct device		*dev;
+	void __iomem		*base;
+	struct device_node	*np;
+	struct irq_domain	*msi_domain;
+	struct irq_domain	*inner_domain;
+	struct mutex		lock; /* guards the alloc/free operations */
+	u64			target_addr;
+	int			irq;
+
+	/* intr_base is the base pointer for interrupt status/set/clr regs */
+	void __iomem		*intr_base;
+
+	/* intr_legacy_mask indicates how many bits are MSI interrupts */
+	u32			intr_legacy_mask;
+
+	/*
+	 * intr_legacy_offset indicates bit position of MSI_01. It is
+	 * to map the register bit position to a hwirq that starts at 0.
+	 */
+	u32			intr_legacy_offset;
+
+	/* used indicates which MSI interrupts have been alloc'd */
+	unsigned long		used;
+	unsigned int		rev;
+};
+
 /* Internal PCIe Host Controller Information.*/
 struct brcm_pcie {
 	struct device		*dev;
@@ -191,7 +233,10 @@ struct brcm_pcie {
 	struct device_node	*np;
 	bool			ssc;
 	int			gen;
+	u64			msi_target_addr;
 	struct brcm_window	out_wins[BRCM_NUM_PCIE_OUT_WINS];
+	struct brcm_msi		*msi;
+	unsigned int		rev;
 	const int		*reg_offsets;
 	const int		*reg_field_info;
 	enum pcie_type		type;
@@ -433,6 +478,259 @@ static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
 			   LIMIT, tmp);
 }
 
+static struct irq_chip brcm_msi_irq_chip = {
+	.name            = "BRCM STB PCIe MSI",
+	.irq_ack         = irq_chip_ack_parent,
+	.irq_mask        = pci_msi_mask_irq,
+	.irq_unmask      = pci_msi_unmask_irq,
+};
+
+static struct msi_domain_info brcm_msi_domain_info = {
+	/* TODO: Multi MSI is technically supported by the controller */
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		   MSI_FLAG_PCI_MSIX),
+	.chip	= &brcm_msi_irq_chip,
+};
+
+static void brcm_pcie_msi_isr(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned long status, virq;
+	struct brcm_msi *msi;
+	u32 mask, bit, hwirq;
+	struct device *dev;
+
+	chained_irq_enter(chip, desc);
+	msi = irq_desc_get_handler_data(desc);
+	mask = msi->intr_legacy_mask;
+	dev = msi->dev;
+
+	status = bcm_readl(msi->intr_base + STATUS) & mask;
+	for_each_set_bit(bit, &status, BRCM_INT_PCI_MSI_NR) {
+
+		/* Account for legacy interrupt offset */
+		hwirq = bit - msi->intr_legacy_offset;
+		virq = irq_find_mapping(msi->inner_domain, hwirq);
+		if (virq)
+			generic_handle_irq(virq);
+		else
+			dev_dbg(dev, "unexpected MSI\n");
+	}
+	chained_irq_exit(chip, desc);
+}
+
+static void brcm_msi_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
+
+	msg->address_lo = lower_32_bits(msi->target_addr);
+	msg->address_hi = upper_32_bits(msi->target_addr);
+	msg->data = 0x6540 | data->hwirq;
+}
+
+static int brcm_msi_set_affinity(struct irq_data *irq_data,
+				 const struct cpumask *mask, bool force)
+{
+	return -EINVAL;
+}
+
+static void brcm_msi_ack_irq(struct irq_data *data)
+{
+	struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
+	u32 bit = data->hwirq + msi->intr_legacy_offset;
+
+	bcm_writel(1 << bit, msi->intr_base + CLR);
+}
+
+
+static struct irq_chip brcm_msi_bottom_irq_chip = {
+	.name			= "BRCM STB MSI",
+	.irq_compose_msi_msg	= brcm_msi_compose_msi_msg,
+	.irq_set_affinity	= brcm_msi_set_affinity,
+	.irq_ack                = brcm_msi_ack_irq,
+};
+
+static int brcm_msi_alloc(struct brcm_msi *msi)
+{
+	int hwirq;
+
+	mutex_lock(&msi->lock);
+	hwirq = bitmap_find_free_region(&msi->used, BRCM_INT_PCI_MSI_NR, 0);
+	if (hwirq >= 0)
+		hwirq = hwirq - msi->intr_legacy_offset;
+	mutex_unlock(&msi->lock);
+
+	return hwirq;
+}
+
+static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq)
+{
+	mutex_lock(&msi->lock);
+	bitmap_release_region(&msi->used, hwirq + msi->intr_legacy_offset, 0);
+	mutex_unlock(&msi->lock);
+}
+
+static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				 unsigned int nr_irqs, void *args)
+{
+	struct brcm_msi *msi = domain->host_data;
+	int hwirq;
+
+	hwirq = brcm_msi_alloc(msi);
+
+	if (hwirq < 0)
+		return hwirq;
+
+	irq_domain_set_info(domain, virq, (irq_hw_number_t)hwirq,
+			    &brcm_msi_bottom_irq_chip, domain->host_data,
+			    handle_edge_irq, NULL, NULL);
+	return 0;
+}
+
+static void brcm_irq_domain_free(struct irq_domain *domain,
+				 unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+	struct brcm_msi *msi = irq_data_get_irq_chip_data(d);
+
+	brcm_msi_free(msi, d->hwirq);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.alloc	= brcm_irq_domain_alloc,
+	.free	= brcm_irq_domain_free,
+};
+
+static int brcm_allocate_domains(struct brcm_msi *msi)
+{
+	struct fwnode_handle *fwnode = of_node_to_fwnode(msi->np);
+	struct device *dev = msi->dev;
+
+	msi->inner_domain = irq_domain_add_linear(NULL, BRCM_INT_PCI_MSI_NR,
+						  &msi_domain_ops, msi);
+	if (!msi->inner_domain) {
+		dev_err(dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	msi->msi_domain = pci_msi_create_irq_domain(fwnode,
+						    &brcm_msi_domain_info,
+						    msi->inner_domain);
+	if (!msi->msi_domain) {
+		dev_err(dev, "failed to create MSI domain\n");
+		irq_domain_remove(msi->inner_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void brcm_free_domains(struct brcm_msi *msi)
+{
+	irq_domain_remove(msi->msi_domain);
+	irq_domain_remove(msi->inner_domain);
+}
+
+static void brcm_msi_remove(struct brcm_pcie *pcie)
+{
+	struct brcm_msi *msi = pcie->msi;
+
+	if (!msi)
+		return;
+	irq_set_chained_handler(msi->irq, NULL);
+	irq_set_handler_data(msi->irq, NULL);
+	brcm_free_domains(msi);
+}
+
+static void brcm_msi_set_regs(struct brcm_msi *msi)
+{
+	u32 data_val, msi_lo, msi_hi;
+
+	if (msi->rev >= BRCM_PCIE_HW_REV_33) {
+		/*
+		 * ffe0 -- least sig 5 bits are 0 indicating 32 msgs
+		 * 6540 -- this is our arbitrary unique data value
+		 */
+		data_val = 0xffe06540;
+	} else {
+		/*
+		 * fff8 -- least sig 3 bits are 0 indicating 8 msgs
+		 * 6540 -- this is our arbitrary unique data value
+		 */
+		data_val = 0xfff86540;
+	}
+
+	/* Unmaks MSIs */
+	bcm_writel(0xffffffff & msi->intr_legacy_mask,
+		   msi->intr_base + MASK_CLR);
+
+	msi_lo = lower_32_bits(msi->target_addr);
+	msi_hi = upper_32_bits(msi->target_addr);
+	/*
+	 * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI
+	 * enable, which we set to 1.
+	 */
+	bcm_writel(msi_lo | 1, msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO);
+	bcm_writel(msi_hi, msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI);
+	bcm_writel(data_val, msi->base + PCIE_MISC_MSI_DATA_CONFIG);
+}
+
+static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
+{
+	struct brcm_msi *msi;
+	int irq, ret;
+	struct device *dev = pcie->dev;
+
+	irq = irq_of_parse_and_map(dev->of_node, 1);
+	if (irq <= 0) {
+		dev_err(dev, "cannot map msi intr\n");
+		return -ENODEV;
+	}
+
+	msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL);
+	if (!msi)
+		return -ENOMEM;
+
+	msi->dev = dev;
+	msi->base = pcie->base;
+	msi->rev =  pcie->rev;
+	msi->np = pcie->np;
+	msi->target_addr = pcie->msi_target_addr;
+	msi->irq = irq;
+
+	ret = brcm_allocate_domains(msi);
+	if (ret)
+		return ret;
+
+	irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi);
+
+	if (msi->rev >= BRCM_PCIE_HW_REV_33) {
+		msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE;
+		/*
+		 * This version of PCIe hw has only 32 intr bits
+		 * starting at bit position 0.
+		 */
+		msi->intr_legacy_mask = 0xffffffff;
+		msi->intr_legacy_offset = 0x0;
+		msi->used = 0x0;
+
+	} else {
+		msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE;
+		/*
+		 * This version of PCIe hw has only 8 intr bits starting
+		 * at bit position 24.
+		 */
+		msi->intr_legacy_mask = 0xff000000;
+		msi->intr_legacy_offset = 24;
+		msi->used = 0x00ffffff;
+	}
+
+	brcm_msi_set_regs(msi);
+	pcie->msi = msi;
+
+	return 0;
+}
+
 /* Configuration space read/write support */
 static int brcm_pcie_cfg_index(int busnr, int devfn, int reg)
 {
@@ -584,6 +882,10 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	/* Wait for SerDes to be stable */
 	usleep_range(100, 200);
 
+	/* Grab the PCIe hw revision number */
+	tmp = bcm_readl(base + PCIE_MISC_REVISION);
+	pcie->rev = EXTRACT_FIELD(tmp, PCIE_MISC_REVISION, MAJMIN);
+
 	/* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
 	tmp = INSERT_FIELD(0, PCIE_MISC_MISC_CTRL, SCB_ACCESS_EN, 1);
 	tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, CFG_READ_UR_MODE, 1);
@@ -596,6 +898,18 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	if (ret)
 		return ret;
 
+	/*
+	 * We ideally want the MSI target address to be located in the 32bit
+	 * addressable memory area. Some devices might depend on it. This is
+	 * possible either when the inbound window is located above the lower
+	 * 4GB or when the inbound and outbound areas fit in the lower 4GB of
+	 * memory.
+	 */
+	if (rc_bar2_offset >= SZ_4G || (rc_bar2_size + rc_bar2_offset) <= SZ_4G)
+		pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB;
+	else
+		pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB;
+
 	tmp = lower_32_bits(rc_bar2_offset);
 	tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE,
 			   brcm_pcie_encode_ibar_size(rc_bar2_size));
@@ -734,6 +1048,7 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
 
 static void __brcm_pcie_remove(struct brcm_pcie *pcie)
 {
+	brcm_msi_remove(pcie);
 	brcm_pcie_turn_off(pcie);
 	clk_disable_unprepare(pcie->clk);
 	clk_put(pcie->clk);
@@ -758,7 +1073,7 @@ MODULE_DEVICE_TABLE(of, brcm_pcie_match);
 
 static int brcm_pcie_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device_node *np = pdev->dev.of_node, *msi_np;
 	const struct pcie_cfg_data *data;
 	struct pci_host_bridge *bridge;
 	struct brcm_pcie *pcie;
@@ -813,6 +1128,15 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		goto fail;
 
+	msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
+	if (pci_msi_enabled() && msi_np == pcie->np) {
+		ret = brcm_pcie_enable_msi(pcie);
+		if (ret) {
+			dev_err(pcie->dev, "probe of internal MSI failed");
+			goto fail;
+		}
+	}
+
 	bridge->dev.parent = &pdev->dev;
 	bridge->busnr = 0;
 	bridge->ops = &brcm_pcie_ops;
-- 
2.24.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ