[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191113124734.27984-2-peter.ujfalusi@ti.com>
Date: Wed, 13 Nov 2019 14:47:33 +0200
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: <broonie@...nel.org>, <lgirdwood@...il.com>
CC: <alsa-devel@...a-project.org>, <kuninori.morimoto.gx@...esas.com>,
<linus.walleij@...aro.org>, <robh+dt@...nel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 1/2] bindings: sound: pcm3168a: Document optional RST gpio
On boards where the RST line is not pulled up, but it is connected to a
GPIO line this property must present in order to be able to enable the
codec.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
Documentation/devicetree/bindings/sound/ti,pcm3168a.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt
index 5d9cb84c661d..f30aebc7603a 100644
--- a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt
+++ b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt
@@ -25,6 +25,12 @@ Required properties:
For required properties on SPI/I2C, consult SPI/I2C device tree documentation
+Optional properties:
+
+ - rst-gpios : Optional RST gpio line for the codec
+ RST = low: device power-down
+ RST = high: device is enabled
+
Examples:
i2c0: i2c0@0 {
@@ -34,6 +40,7 @@ i2c0: i2c0@0 {
pcm3168a: audio-codec@44 {
compatible = "ti,pcm3168a";
reg = <0x44>;
+ rst-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
clocks = <&clk_core CLK_AUDIO>;
clock-names = "scki";
VDD1-supply = <&supply3v3>;
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists