Date:   Wed, 13 Nov 2019 10:02:10 -0500
From:   Hugh Cole-Baker <sigmaris@...il.com>
To:     Vasily Khoruzhick <anarsoul@...il.com>
Cc:     Katsuhiro Suzuki <katsuhiro@...suster.net>,
        linux-rockchip@...ts.infradead.org,
        Heiko Stuebner <heiko@...ech.de>,
        arm-linux <linux-arm-kernel@...ts.infradead.org>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: rockchip: add analog audio nodes on
 rk3399-rockpro64


> On 12 Nov 2019, at 14:46, Vasily Khoruzhick <anarsoul@...il.com> wrote:
> 
> On Tue, Nov 12, 2019 at 10:34 AM Katsuhiro Suzuki
> <katsuhiro@...suster.net> wrote:
>> 
>> On 2019/11/12 14:49, Vasily Khoruzhick wrote:
>>> On Mon, Nov 11, 2019 at 9:43 PM Vasily Khoruzhick <anarsoul@...il.com> wrote:
>>>> 
>>>> On Mon, Nov 11, 2019 at 9:34 PM Katsuhiro Suzuki
>>>> <katsuhiro@...suster.net> wrote:
>>>>> 
>>>>> Hello Vasily,
>>>>> 
>>>>> Thank you for valuable information.
>>>>> 
>>>>> On 2019/11/12 4:25, Vasily Khoruzhick wrote:
>>>>>> On Sun, Nov 10, 2019 at 9:40 PM Vasily Khoruzhick <anarsoul@...il.com> wrote:
>>>>>>> 
>>>>>>> On Sun, Nov 10, 2019 at 7:30 PM Katsuhiro Suzuki
>>>>>>> <katsuhiro@...suster.net> wrote:
>>>>>>>> 
>>>>>>>> Hello Vasily,
>>>>>>> 
>>>>>>> Hi Katsuhiro,
>>>>>>> 
>>>>>>> Thanks for response!
>>>>>> 
>>>>>> Looks like on my board codec sits at address 0x10, and according to
>>>>>> schematics that's what its address is supposed to be.
>>>>>> 
>>>>>> See http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf
>>>>>> 
>>>>>> Codec address is selected by pin CE of ES8316, and on rockpro64 it
>>>>>> goes to GND through R226. So address should be 0x10.
>>>>>> 
>>>>> 
>>>>> Yes, I agree. The schematics both v2.0 and v2.1 say that ES8316
>>>>> address is 0x10. Thank you for pointing.
>>>>> 
>>>>> But I wonder that my RockPro64 behavior is strange, he is in address
>>>>> 0x11. (R226 on my board is broken...??)
>>>>> 
>>>>> root@...kpro64:~# i2cdetect 1
>>>>> WARNING! This program can confuse your I2C bus, cause data loss and worse!
>>>>> I will probe file /dev/i2c-1.
>>>>> I will probe address range 0x03-0x77.
>>>>> Continue? [Y/n] y
>>>>>       0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
>>>>> 00:          -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 10: -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 70: -- -- -- -- -- -- -- --
>>>>> 
>>>>> I plan to check R226 resistance value to judge R226 is broken or not
>>>>> after return to home. And share the result with you.
>>>>> Please give me a time.
>>>> 
>>>> Thanks for confirming that on your board it's on address 0x11. I
>>>> checked with some other rockpro64 owners and they have it on 0x10, but
>>>> looks like we have boards with codec on different address in the wild.
>>> 
>>> Another datapoint is that my board is 2.0. If yours is 2.1 it can be a
>>> difference between 2.0 and 2.1.
>>> 
>> 
>> I'm using v2.1 board.
>> 
>> 
>> I'll share the checking result. It's a little strange.
>> 
>> 1) Voltage of CE pin of ES8316
>> 
>> It is 1.8V when booting linux-next kernel.
>> 
>> 
>> 2) My board
>> 
>> I can't find no crack nor broken parts on my board.
>> 
>> 
>> 2) R225, R226
>> 
>> As you know, RockPro64 board has no silk print so we cannot know
>> perfectly which resistance is R226. So this is my assumption.
>> 
>>        PCIe, SD card slot
>>           (top)
>> LAN (left)ES8316(right) USB, reset button
>> 
>> On the left space of ES8316 there is no resistance, only a pattern.
>> This is maybe R225. And 10K resistance on the right side of a
>> pattern. I assume this is R226.
>> 
>> If my assumption is correctly, board implementation and schematics
>> are different.
>> 
>> schematics of v2.1 gets something wrong...??
> 
> Guess we need few more RockPro64 v2.1 owners to confirm that it's
> indeed the case.

I also have a RockPro64 board v2.1, and my ES8316 codec is at address 0x11.
I'm using a kernel with Katsuhiro's patch and I can use alsamixer and play
sounds out of the analog jack. My i2cdetect output:

root@...i64:~# i2cdetect 1
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n]
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- —

Regards,
Hugh

> 
>> 
>>>>> Best Regards,
>>>>> Katsuhiro Suzuki
>>>>> 
>>>>> 
>>>>>>>> Thank you for reporting.
>>>>>>>> 
>>>>>>>> On 2019/11/11 9:17, Vasily Khoruzhick wrote:
>>>>>>>>> On Sat, Sep 7, 2019 at 10:48 AM Katsuhiro Suzuki
>>>>>>>>> <katsuhiro@...suster.net> wrote:
>>>>>>>>>> 
>>>>>>>>>> This patch adds audio codec (Everest ES8316) and I2S audio nodes for
>>>>>>>>>> RK3399 RockPro64.
>>>>>>>>> 
>>>>>>>>> Hi Katsuhiro,
>>>>>>>>> 
>>>>>>>>> I tested your patch with my rockpro64 on 5.4-rc6 which has your other
>>>>>>>>> patches to es8316 driver, but apparently it doesn't work.
>>>>>>>>> 
>>>>>>>>> 'alsamixer' complains 'cannot load mixer controls: No such device or
>>>>>>>>> address' and if I try to play audio with mpg123 it pretends that it
>>>>>>>>> plays something but there's no sound.
>>>>>>>>> 
>>>>>>>>> Any idea what can be wrong?
>>>>>>>>> 
>>>>>>>> 
>>>>>>>> Do you use defconfig? If so I guess we need turn on more configs:
>>>>>>>> 
>>>>>>>> - simple-graph-card driver (CONFIG_SND_AUDIO_GRAPH_CARD)
>>>>>>>> - ES8316 (SND_SOC_ES8316)
>>>>>>> 
>>>>>>> I have these enabled, card is present in /proc/asound/cards, but
>>>>>>> alsamixer doesn't work with it.
>>>>>>> 
>>>>>>>> FYI) ASoC related status or logs in my environment as follows:
>>>>>>>> 
>>>>>>>> root@...kpro64:~# uname -a
>>>>>>>> Linux rockpro64 5.4.0-rc6-next-20191108 #169 SMP PREEMPT Mon Nov 11 12:21:44 JST 2019 aarch64 GNU/Linux
>>>>>>> 
>>>>>>> I'm running 5.4.0-rc6  (commit
>>>>>>> 00aff6836241ae5654895dcea10e6d4fc5878ca6) with your patch "arm64: dts:
>>>>>>> rockchip: add analog audio nodes on rk3399-rockpro64" on top of it.
>>>>>>> 
>>>>>>>> root@...kpro64:~# dmesg | grep -i asoc
>>>>>>>> [   21.509903] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
>>>>>>>> [   21.510550] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
>>>>>>>> [   21.567906] asoc-audio-graph-card sound: ES8316 HiFi <-> ff890000.i2s mapping ok
>>>>>>>> [   21.568565] asoc-audio-graph-card sound: ASoC: no DMI vendor name!
>>>>>>> 
>>>>>>> Similar here:
>>>>>>> 
>>>>>>> [vasilykh@...kpro64 ~]$ dmesg | grep -i asoc
>>>>>>> [   15.627685] asoc-audio-graph-card sound: ES8316 HiFi <->
>>>>>>> ff890000.i2s mapping ok
>>>>>>> [   16.250196] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
>>>>>>> 
>>>>>>>> root@...kpro64:~# cat /proc/asound/pcm
>>>>>>>> 00-00: ff8a0000.i2s-i2s-hifi i2s-hifi-0 : ff8a0000.i2s-i2s-hifi i2s-hifi-0 : playback 1
>>>>>>>> 01-00: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : playback 1 : capture 1
>>>>>>> 
>>>>>>> Same here:
>>>>>>> 
>>>>>>> [vasilykh@...kpro64 ~]$ cat /proc/asound/pcm
>>>>>>> 00-00: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : ff890000.i2s-ES8316
>>>>>>> HiFi ES8316 HiFi-0 : playback 1 : capture 1
>>>>>>> 01-00: ff8a0000.i2s-i2s-hifi i2s-hifi-0 : ff8a0000.i2s-i2s-hifi
>>>>>>> i2s-hifi-0 : playback
>>>>>>> 
>>>>>>>> root@...kpro64:~# cat /sys/kernel/debug/asoc/components
>>>>>>>> hdmi-audio-codec.3.auto
>>>>>>>> ff8a0000.i2s
>>>>>>>> ff8a0000.i2s
>>>>>>>> ff890000.i2s
>>>>>>>> ff890000.i2s
>>>>>>>> ff880000.i2s
>>>>>>>> ff880000.i2s
>>>>>>>> es8316.1-0011
>>>>>>>> snd-soc-dummy
>>>>>>>> snd-soc-dummy
>>>>>>> 
>>>>>>> Same here.
>>>>>>> 
>>>>>>>> root@...kpro64:~# cat /sys/kernel/debug/asoc/dais
>>>>>>>> i2s-hifi
>>>>>>>> ff8a0000.i2s
>>>>>>>> ff890000.i2s
>>>>>>>> ff880000.i2s
>>>>>>>> ES8316 HiFi
>>>>>>>> snd-soc-dummy-dai
>>>>>>> 
>>>>>>> Same here.
>>>>>>> 
>>>>>>> Yet alsamixer doesn't work for me. It terminates with 'cannot load
>>>>>>> mixer controls: No such device or address'. Strace shows that fails
>>>>>>> here:
>>>>>>> 
>>>>>>> openat(AT_FDCWD, "/dev/snd/controlC0", O_RDWR|O_CLOEXEC) = 3
>>>>>>> fcntl(3, F_SETFD, FD_CLOEXEC)           = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_PVERSION, 0xfffffd3ad04c) = 0
>>>>>>> fcntl(3, F_GETFL)                       = 0x20002 (flags O_RDWR|O_LARGEFILE)
>>>>>>> fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK|O_LARGEFILE) = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_ELEM_LIST, 0xfffffd3ad228) = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_ELEM_LIST, 0xfffffd3ad228) = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_ELEM_INFO, 0xfffffd3ace38) = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_ELEM_READ, 0xfffffd3ac160) = -1 ENXIO (No
>>>>>>> such device or address)
>>>>>>> 
>>>>>>> Looks like it fails to talk to the codec?
>>>>>>> 
>>>>>>> mpg123 thinks that it's playing audio, but my headphones connected to
>>>>>>> 3.5mm output are silent.
>>>>>>> 
>>>>>>> Regards,
>>>>>>> Vasily
>>>>>>> 
>>>>>>> 
>>>>>>>> Best Regards,
>>>>>>>> Katsuhiro Suzuki
>>>>>>>> 
>>>>>>>> 
>>>>>>>>> Regards,
>>>>>>>>> Vasily
>>>>>>>>> 
>>>>>>>>>> Signed-off-by: Katsuhiro Suzuki <katsuhiro@...suster.net>
>>>>>>>>>> ---
>>>>>>>>>>    .../boot/dts/rockchip/rk3399-rockpro64.dts    | 28 +++++++++++++++++++
>>>>>>>>>>    1 file changed, 28 insertions(+)
>>>>>>>>>> 
>>>>>>>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>>>>>>>>>> index 0401d4ec1f45..8b1e6382b140 100644
>>>>>>>>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>>>>>>>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>>>>>>>>>> @@ -81,6 +81,12 @@
>>>>>>>>>>                   reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
>>>>>>>>>>           };
>>>>>>>>>> 
>>>>>>>>>> +       sound {
>>>>>>>>>> +               compatible = "audio-graph-card";
>>>>>>>>>> +               label = "rockchip,rk3399";
>>>>>>>>>> +               dais = <&i2s1_p0>;
>>>>>>>>>> +       };
>>>>>>>>>> +
>>>>>>>>>>           vcc12v_dcin: vcc12v-dcin {
>>>>>>>>>>                   compatible = "regulator-fixed";
>>>>>>>>>>                   regulator-name = "vcc12v_dcin";
>>>>>>>>>> @@ -470,6 +476,20 @@
>>>>>>>>>>           i2c-scl-rising-time-ns = <300>;
>>>>>>>>>>           i2c-scl-falling-time-ns = <15>;
>>>>>>>>>>           status = "okay";
>>>>>>>>>> +
>>>>>>>>>> +       es8316: codec@11 {
>>>>>>>>>> +               compatible = "everest,es8316";
>>>>>>>>>> +               reg = <0x11>;
>>>>>>>>>> +               clocks = <&cru SCLK_I2S_8CH_OUT>;
>>>>>>>>>> +               clock-names = "mclk";
>>>>>>>>>> +               #sound-dai-cells = <0>;
>>>>>>>>>> +
>>>>>>>>>> +               port {
>>>>>>>>>> +                       es8316_p0_0: endpoint {
>>>>>>>>>> +                               remote-endpoint = <&i2s1_p0_0>;
>>>>>>>>>> +                       };
>>>>>>>>>> +               };
>>>>>>>>>> +       };
>>>>>>>>>>    };
>>>>>>>>>> 
>>>>>>>>>>    &i2c3 {
>>>>>>>>>> @@ -505,6 +525,14 @@
>>>>>>>>>>           rockchip,playback-channels = <2>;
>>>>>>>>>>           rockchip,capture-channels = <2>;
>>>>>>>>>>           status = "okay";
>>>>>>>>>> +
>>>>>>>>>> +       i2s1_p0: port {
>>>>>>>>>> +               i2s1_p0_0: endpoint {
>>>>>>>>>> +                       dai-format = "i2s";
>>>>>>>>>> +                       mclk-fs = <256>;
>>>>>>>>>> +                       remote-endpoint = <&es8316_p0_0>;
>>>>>>>>>> +               };
>>>>>>>>>> +       };
>>>>>>>>>>    };
>>>>>>>>>> 
>>>>>>>>>>    &i2s2 {
>>>>>>>>>> --
>>>>>>>>>> 2.23.0.rc1
>>>>>>>>>> 
>>>>>>>>>> 
>>>>>>>>>> _______________________________________________
>>>>>>>>>> linux-arm-kernel mailing list
>>>>>>>>>> linux-arm-kernel@...ts.infradead.org
>>>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>>>>>>> 
>>>>>>>> 
>>>>>> 
>>>>> 
>>> 
>> 
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Powered by blists - more mailing lists