[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191113023844.17800-1-Mark-MC.Lee@mediatek.com>
Date: Wed, 13 Nov 2019 10:38:41 +0800
From: MarkLee <Mark-MC.Lee@...iatek.com>
To: "David S. Miller" <davem@...emloft.net>,
Sean Wang <sean.wang@...iatek.com>,
John Crispin <john@...ozen.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Andrew Lunn <andrew@...n.ch>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Rene van Dorst <opensource@...rst.com>,
<devicetree@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
"Jakub Kicinski" <jakub.kicinski@...ronome.com>,
MarkLee <Mark-MC.Lee@...iatek.com>
Subject: [PATCH net,v3 0/3] Rework mt762x GDM setup flow
The mt762x GDM block is mainly used to setup the HW internal
rx path from GMAC to RX DMA engine(PDMA) and the packet
switching engine(PSE) is responsed to do the data forward
following the GDM configuration.
This patch set have three goals :
1. Integrate GDM/PSE setup operations into single function "mtk_gdm_config"
2. Refine the timing of GDM/PSE setup, move it from mtk_hw_init
to mtk_open
3. Enable GDM GDMA_DROP_ALL mode to drop all packet during the
stop operation
MarkLee (3):
net: ethernet: mediatek: Integrate GDM/PSE setup operations
net: ethernet: mediatek: Refine the timing of GDM/PSE setup
net: ethernet: mediatek: Enable GDM GDMA_DROP_ALL mode
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 44 ++++++++++++++-------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +
2 files changed, 31 insertions(+), 15 deletions(-)
--
2.17.1
Powered by blists - more mailing lists