linux-kernel - Re: [PATCH 1/4] dt-bindings: pci: add bindings for brcmstb's PCIe device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191113041533.GA25497@bogus>
Date:   Tue, 12 Nov 2019 22:15:33 -0600
From:   Rob Herring <robh@...nel.org>
To:     Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc:     Andrew Murray <andrew.murray@....com>, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com,
        linux-rpi-kernel@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        james.quinlan@...adcom.com, mbrugger@...e.com,
        f.fainelli@...il.com, phil@...pberrypi.org, wahrenst@....net,
        Mark Rutland <mark.rutland@....com>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/4] dt-bindings: pci: add bindings for brcmstb's PCIe
 device

On Wed, Nov 06, 2019 at 10:45:23PM +0100, Nicolas Saenz Julienne wrote:
> From: Jim Quinlan <james.quinlan@...adcom.com>
> 
> The DT bindings description of the brcmstb PCIe device is described.
> This node can only be used for now on the Raspberry Pi 4.
> 
> This was based on Jim's original submission[1], converted to yaml and
> adapted to the RPi4 case.
> 
> [1] https://patchwork.kernel.org/patch/10605937/
> 
> Signed-off-by: Jim Quinlan <james.quinlan@...adcom.com>
> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
> ---
>  .../bindings/pci/brcm,stb-pcie.yaml           | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

I'm working on a common PCI host schema that should cut down some of the 
standard props.

> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> new file mode 100644
> index 000000000000..0b81c26f8568
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license new bindings please:

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Brcmstb PCIe Host Controller Device Tree Bindings
> +
> +maintainers:
> +  - Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
> +
> +properties:
> +  compatible:
> +    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description: PCIe host controller
> +      - description: builtin MSI controller
> +
> +  interrupt-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - const: pcie
> +      - const: msi
> +
> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  interrupt-map-mask: true
> +
> +  interrupt-map: true

4 entries?

You'll need to bracket <> each entry in the example and dts.

> +
> +  ranges: true

How many entries?

> +
> +  dma-ranges: true

How many entries?

> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: sw_pcie
> +
> +  msi-controller:
> +    description: Identifies the node as an MSI controller.
> +    type: boolean
> +
> +  msi-parent:
> +    description: MSI controller the device is capable of using.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +  linux,pci-domain:
> +    description: PCI domain ID. Should be unique for each host controller.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  brcm,enable-ssc:
> +    description: Indicates usage of spread-spectrum clocking.
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - "#interrupt-cells"
> +  - interrupt-map-mask
> +  - interrupt-map
> +  - ranges
> +  - dma-ranges
> +  - linux,pci-domain
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    scb {
> +            #address-cells = <2>;
> +            #size-cells = <1>;
> +            pcie0: pcie@...00000 {
> +                    compatible = "brcm,bcm2711-pcie";
> +                    reg = <0x0 0x7d500000 0x9310>;
> +                    #address-cells = <3>;
> +                    #size-cells = <2>;
> +                    #interrupt-cells = <1>;
> +                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +                    interrupt-names = "pcie", "msi";
> +                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
> +                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
> +                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
> +                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> +                    msi-parent = <&pcie0>;
> +                    msi-controller;
> +                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
> +                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
> +                    linux,pci-domain = <0>;
> +                    brcm,enable-ssc;
> +            };
> +    };
> -- 
> 2.23.0
>