[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191113074104.nbcc6kopsr3ow4kt@pengutronix.de>
Date: Wed, 13 Nov 2019 08:41:04 +0100
From: Marco Felsch <m.felsch@...gutronix.de>
To: Fabio Estevam <festevam@...il.com>
Cc: Oliver Graute <oliver.graute@...il.com>,
Shawn Guo <shawnguo@...nel.org>,
Neil Armstrong <narmstrong@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCHv7 2/3] ARM: dts: Add support for i.MX6 UltraLite DART
Variscite Customboard
On 19-11-12 20:17, Fabio Estevam wrote:
> Hi Oliver,
>
> On Tue, Nov 12, 2019 at 4:22 PM Oliver Graute <oliver.graute@...il.com> wrote:
>
> > +&lcdif {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lcdif>;
> > + display = <&display0>;
> > + status = "okay";
> > +
> > + display0: display0 {
> > + bits-per-pixel = <16>;
> > + bus-width = <24>;
> > +
> > + display-timings {
> > + native-mode = <&timing0>;
> > + timing0: timing0 {
> > + clock-frequency =<35000000>;
> > + hactive = <800>;
> > + vactive = <480>;
> > + hfront-porch = <40>;
> > + hback-porch = <40>;
> > + hsync-len = <48>;
> > + vback-porch = <29>;
> > + vfront-porch = <13>;
> > + vsync-len = <3>;
> > + hsync-active = <0>;
> > + vsync-active = <0>;
> > + de-active = <1>;
> > + pixelclk-active = <0>;
> > + };
> > + };
> > + };
> > +};
>
> You are using the deprecated bindings.
>
> Please switch to the DRM bindings as stated at
> Documentation/devicetree/bindings/display/mxsfb.txt
>
> You should also add your panel to the simple panel driver.
That would be the best solution :)
Regards,
Marco
Powered by blists - more mailing lists