linux-kernel - Re: [PATCH] devfreq: exynos-bus: workaround dev_pm_opp_set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <60d9c577-128a-3ca9-2979-aa444cfb4e12@samsung.com>
Date:   Wed, 13 Nov 2019 18:52:38 +0900
From:   Chanwoo Choi <cw00.choi@...sung.com>
To:     k.konieczny@...tner.samsung.com
Cc:     Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Marek Szyprowski <m.szyprowski@...sung.com>,
        MyungJoo Ham <myungjoo.ham@...sung.com>,
        Kyungmin Park <kyungmin.park@...sung.com>,
        Kukjin Kim <kgene@...nel.org>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        linux-pm@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] devfreq: exynos-bus: workaround dev_pm_opp_set_rate()
 errors on Exynos5422/5800 SoCs

Hi Kamil,

Ping.

On 10/10/19 11:50 AM, Chanwoo Choi wrote:
> On 2019년 10월 08일 22:49, k.konieczny@...tner.samsung.com wrote:
>> Commit 4294a779bd8d ("PM / devfreq: exynos-bus: Convert to use
>> dev_pm_opp_set_rate()") introduced errors:
>> exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
>> exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
>> exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
>> ...
>> exynos-bus soc:bus_wcore: dev_pm_opp_set_rate: failed to find current OPP for freq 532000000 (-34)
>> exynos-bus soc:bus_noc: dev_pm_opp_set_rate: failed to find current OPP for freq 111000000 (-34)
>> exynos-bus soc:bus_fsys_apb: dev_pm_opp_set_rate: failed to find current OPP for freq 222000000 (-34)
>>
>> They are caused by incorrect PLL assigned to clock source, which results
>> in clock rate outside of OPP range. Add workaround for this in
>> exynos_bus_parse_of() by adjusting clock rate to those present in OPP.
> 
> If the clock caused this issue, you can set the initial clock on DeviceTree
> with assigned-clock-* properties. Because the probe time of clock driver
> is early than the any device drivers.
> 
> It is not proper to fix the clock issue on other device driver.
> I think you can fix it by using the supported clock properties.

Is there any reply? or other patch to fix it?

> 
> 
>>
>> Fixes: 4294a779bd8d ("PM / devfreq: exynos-bus: Convert to use dev_pm_opp_set_rate()")
>> Reported-by: Krzysztof Kozlowski <krzk@...nel.org>
>> Signed-off-by: Kamil Konieczny <k.konieczny@...tner.samsung.com>
>> ---
>>  drivers/devfreq/exynos-bus.c | 14 +++++++++++---
>>  1 file changed, 11 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
>> index c832673273a2..37bd34d5625b 100644
>> --- a/drivers/devfreq/exynos-bus.c
>> +++ b/drivers/devfreq/exynos-bus.c
>> @@ -243,7 +243,7 @@ static int exynos_bus_parse_of(struct device_node *np,
>>  {
>>  	struct device *dev = bus->dev;
>>  	struct dev_pm_opp *opp;
>> -	unsigned long rate;
>> +	unsigned long rate, opp_rate;
>>  	int ret;
>>  
>>  	/* Get the clock to provide each bus with source clock */
>> @@ -267,13 +267,21 @@ static int exynos_bus_parse_of(struct device_node *np,
>>  	}
>>  
>>  	rate = clk_get_rate(bus->clk);
>> -
>> -	opp = devfreq_recommended_opp(dev, &rate, 0);
>> +	opp_rate = rate;
>> +	opp = devfreq_recommended_opp(dev, &opp_rate, 0);
>>  	if (IS_ERR(opp)) {
>>  		dev_err(dev, "failed to find dev_pm_opp\n");
>>  		ret = PTR_ERR(opp);
>>  		goto err_opp;
>>  	}
>> +	/*
>> +	 * FIXME: U-boot leaves clock source at incorrect PLL, this results
>> +	 * in clock rate outside defined OPP rate. Work around this bug by
>> +	 * setting clock rate to recommended one.
>> +	 */
>> +	if (rate > opp_rate)
>> +		clk_set_rate(bus->clk, opp_rate);
>> +
>>  	bus->curr_freq = dev_pm_opp_get_freq(opp);
>>  	dev_pm_opp_put(opp);
>>  
>>
> 
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics