| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 15 Nov 2019 10:12:11 +1030
From: Marian Mihailescu <mihailescu2m@...il.com>
To: linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, krzk@...nel.org, robh+dt@...nel.org,
mark.rutland@....com, kgene@...nel.org
Cc: Marian Mihailescu <mihailescu2m@...il.com>
Subject: [PATCH v6] ARM: dts: exynos5420: add mali dt node and enable mali on Odroid XU3/4
Add device tree node for Mali GPU for Exynos 542x SoC.
GPU is disabled by default, and is enabled for each board after the
regulator is defined. Tested on Odroid-XU4.
Signed-off-by: Marian Mihailescu <mihailescu2m@...il.com>
---
Changes since v5:
- fixed compile warnings
Changes since v4:
- fixed so it applies for latest 5.4-rc7
Changes since v3:
- fixed compatible to match bindings
Changes since v2:
- separate patch for bindings
- fixed bindings typo
Changes since v1:
- used generic node and label for GPU
- added bindings for compatible
- fixed irq indentation
- fixed interrupt-names to match bindings
- added cooling cells for future TMU connection
- used generic node and label for GPU opp table
- removed always-on from SoC GPU regulator
---
arch/arm/boot/dts/exynos5420.dtsi | 50 +++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 6 +++-
2 files changed, 55 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 7d51e0f4ab79..8c354902c3f8 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -670,6 +670,56 @@
iommus = <&sysmmu_gscl1>;
};
+ gpu: gpu@...00000 {
+ compatible = "samsung,exynos5420-mali", "arm,mali-t628";
+ reg = <0x11800000 0x5000>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+
+ clocks = <&clock CLK_G3D>;
+ clock-names = "core";
+ power-domains = <&g3d_pd>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ status = "disabled";
+ #cooling-cells = <2>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-177000000 {
+ opp-hz = /bits/ 64 <177000000>;
+ opp-microvolt = <812500>;
+ };
+ opp-266000000 {
+ opp-hz = /bits/ 64 <266000000>;
+ opp-microvolt = <862500>;
+ };
+ opp-350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <912500>;
+ };
+ opp-420000000 {
+ opp-hz = /bits/ 64 <420000000>;
+ opp-microvolt = <962500>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-543000000 {
+ opp-hz = /bits/ 64 <543000000>;
+ opp-microvolt = <1037500>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1150000>;
+ };
+ };
+ };
+
scaler_0: scaler@...00000 {
compatible = "samsung,exynos5420-scaler";
reg = <0x12800000 0x1294>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 829147e320e0..f880aeccbace 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -522,7 +522,6 @@
regulator-name = "vdd_g3d";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
@@ -654,6 +653,11 @@
vtmu-supply = <&ldo7_reg>;
};
+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
--
2.14.1
Powered by blists - more mailing lists