[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1573712059.git.rahul.tanwar@linux.intel.com>
Date: Thu, 14 Nov 2019 14:29:05 +0800
From: Rahul Tanwar <rahul.tanwar@...ux.intel.com>
To: linus.walleij@...aro.org, robh+dt@...nel.org, mark.rutland@....com
Cc: linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, robh@...nel.org,
andriy.shevchenko@...el.com, qi-ming.wu@...el.com,
yixin.zhu@...ux.intel.com, cheol.yong.kim@...el.com,
Rahul Tanwar <rahul.tanwar@...ux.intel.com>
Subject: [PATCH v7 0/2] pinctrl: Add new pinctrl/GPIO driver
Hi,
This series is to add pinctrl & GPIO controller driver for a new SoC.
Patch 1 adds pinmux & GPIO controller driver.
Patch 2 adds the corresponding dt bindings YAML document.
Patches are against Linux 5.4-rc1 at below Git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
v7:
- Fix code quality/style related review concerns.
- Correct license id & data types used for some properties in dt bindings.
- Add possible values for drive-strength & slew rate in dt bindings.
- Rename compatible name to more self explanatory name in dt bindings.
- Fix make dt_binding_check reported errors. Ensure make dt_binding_check
passes.
v6:
- Fix code quality/style/readability related review concerns.
- Remove enum usage from pinmux property in dt bindings.
v5:
- Fix code style/readability related review concerns.
- Change data type of groups property to uint32-array in dt bindings.
v4:
- Correct data types for some pin config properties in dt bindings.
- Improve pattern regex as per review feedback in dt bindings.
- Remove eqbr_set_val() & set_drv_cur() reg update routines & instead
do reg updates in eqbr_pinconf_set() routine itself.
- Add locking in few ops where it was missing.
- Rename eqbr_gpio_desc struct to eqbr_gpio_ctrl and avoid using desc
in variable namings so as not to confuse with GPIO descriptors.
- Address code quality/convention/style related review concerns.
v3:
- Add locking for GPIO IRQ ops.
- Fix property naming mistake in dt bindings document.
- Address other code quality related review concerns.
- Fix a build error reported by kbuild test robot.
- Remove deleted structure fields from comments.
v2:
- Enable GENERIC_PINMUX_FUNCTIONS & GENERIC_PINCTRL_GROUPS and use core
provided code for pinmux_ops & pinctrl_ops. Remove related code from
the driver.
- Enable GENERIC_PINCONF & use core provided pinconf code. Remove related
code from the driver.
- Use GPIOLIB_IRQCHIP framework core code instead of implementing separtely
in the driver.
- Enable GPIO_GENERIC and switch to core provided memory mapped GPIO banks
design.
- Use standard pinctrl DT properties instead of custom made properties.
- Address review concerns for dt bindings document.
- Address code quality related review concerns.
v1:
- Initial version.
Rahul Tanwar (2):
pinctrl: Add pinmux & GPIO controller driver for a new SoC
dt-bindings: pinctrl: intel: Add for new SoC
.../bindings/pinctrl/intel,lgm-pinctrl.yaml | 116 +++
drivers/pinctrl/Kconfig | 18 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-equilibrium.c | 944 +++++++++++++++++++++
drivers/pinctrl/pinctrl-equilibrium.h | 144 ++++
5 files changed, 1223 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml
create mode 100644 drivers/pinctrl/pinctrl-equilibrium.c
create mode 100644 drivers/pinctrl/pinctrl-equilibrium.h
--
2.11.0
Powered by blists - more mailing lists