| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 13 Nov 2019 23:39:24 -0800 (PST)
From: Paul Walmsley <paul.walmsley@...ive.com>
To: Christoph Hellwig <hch@....de>
cc: Palmer Dabbelt <palmer@...ive.com>,
Damien Le Moal <damien.lemoal@....com>,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 09/15] riscv: provide native clint access for M-mode
On Thu, 17 Oct 2019, Christoph Hellwig wrote:
> RISC-V has the concept of a cpu level interrupt controller. The
> interface for it is split between a standardized part that is exposed
> as bits in the mstatus/sstatus register and the mie/mip/sie/sip
> CRS. But the bit to actually trigger IPIs is not standardized and
> just mentioned as implementable using MMIO.
>
> Add support for IPIs using MMIO using the SiFive clint layout (which is
> also shared by Ariane, Kendrye and the Qemu virt platform). Additional
> the MMIO block also support the time value and timer compare registers,
> so they are also set up using the same OF node. Support for other
> layouts should also be relatively easy to add in the future.
>
> Signed-off-by: Christoph Hellwig <hch@....de>
Thanks, queued the following for v5.5-rc1.
- Paul
From: Christoph Hellwig <hch@....de>
Date: Mon, 28 Oct 2019 13:10:38 +0100
Subject: [PATCH] riscv: provide native clint access for M-mode
RISC-V has the concept of a cpu level interrupt controller. The
interface for it is split between a standardized part that is exposed
as bits in the mstatus/sstatus register and the mie/mip/sie/sip
CRS. But the bit to actually trigger IPIs is not standardized and
just mentioned as implementable using MMIO.
Add support for IPIs using MMIO using the SiFive clint layout (which
is also shared by Ariane, Kendryte and the Qemu virt platform).
Additionally the MMIO block also supports the time value and timer
compare registers, so they are also set up using the same OF node.
Support for other layouts should also be relatively easy to add in the
future.
Signed-off-by: Christoph Hellwig <hch@....de>
Reviewed-by: Anup Patel <anup@...infault.org>
[paul.walmsley@...ive.com: update include guard format; fix checkpatch
issues; minor commit message cleanups]
Signed-off-by: Paul Walmsley <paul.walmsley@...ive.com>
---
arch/riscv/include/asm/clint.h | 39 ++++++++++++++++++++++++++++++
arch/riscv/include/asm/sbi.h | 2 ++
arch/riscv/kernel/Makefile | 1 +
arch/riscv/kernel/clint.c | 44 ++++++++++++++++++++++++++++++++++
arch/riscv/kernel/setup.c | 2 ++
arch/riscv/kernel/smp.c | 16 ++++++++++---
arch/riscv/kernel/smpboot.c | 4 ++++
7 files changed, 105 insertions(+), 3 deletions(-)
create mode 100644 arch/riscv/include/asm/clint.h
create mode 100644 arch/riscv/kernel/clint.c
diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
new file mode 100644
index 000000000000..6eaa2eedd694
--- /dev/null
+++ b/arch/riscv/include/asm/clint.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_CLINT_H
+#define _ASM_RISCV_CLINT_H 1
+
+#include <linux/io.h>
+#include <linux/smp.h>
+
+#ifdef CONFIG_RISCV_M_MODE
+extern u32 __iomem *clint_ipi_base;
+
+void clint_init_boot_cpu(void);
+
+static inline void clint_send_ipi_single(unsigned long hartid)
+{
+ writel(1, clint_ipi_base + hartid);
+}
+
+static inline void clint_send_ipi_mask(const struct cpumask *hartid_mask)
+{
+ int hartid;
+
+ for_each_cpu(hartid, hartid_mask)
+ clint_send_ipi_single(hartid);
+}
+
+static inline void clint_clear_ipi(unsigned long hartid)
+{
+ writel(0, clint_ipi_base + hartid);
+}
+#else /* CONFIG_RISCV_M_MODE */
+#define clint_init_boot_cpu() do { } while (0)
+
+/* stubs to for code is only reachable under IS_ENABLED(CONFIG_RISCV_M_MODE): */
+void clint_send_ipi_single(unsigned long hartid);
+void clint_send_ipi_mask(const struct cpumask *hartid_mask);
+void clint_clear_ipi(unsigned long hartid);
+#endif /* CONFIG_RISCV_M_MODE */
+
+#endif /* _ASM_RISCV_CLINT_H */
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 8e14d4819d0f..2570c1e683d3 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -97,6 +97,8 @@ static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
#else /* CONFIG_RISCV_SBI */
/* stubs for code that is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
void sbi_set_timer(uint64_t stime_value);
+void sbi_clear_ipi(void);
+void sbi_send_ipi(const unsigned long *hart_mask);
void sbi_remote_fence_i(const unsigned long *hart_mask);
#endif /* CONFIG_RISCV_SBI */
#endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index d8c35fa93cc6..2dca51046899 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -29,6 +29,7 @@ obj-y += vdso.o
obj-y += cacheinfo.o
obj-y += vdso/
+obj-$(CONFIG_RISCV_M_MODE) += clint.o
obj-$(CONFIG_FPU) += fpu.o
obj-$(CONFIG_SMP) += smpboot.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/riscv/kernel/clint.c b/arch/riscv/kernel/clint.c
new file mode 100644
index 000000000000..3647980d14c3
--- /dev/null
+++ b/arch/riscv/kernel/clint.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Christoph Hellwig.
+ */
+
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/types.h>
+#include <asm/clint.h>
+#include <asm/csr.h>
+#include <asm/timex.h>
+#include <asm/smp.h>
+
+/*
+ * This is the layout used by the SiFive clint, which is also shared by the qemu
+ * virt platform, and the Kendryte KD210 at least.
+ */
+#define CLINT_IPI_OFF 0
+#define CLINT_TIME_CMP_OFF 0x4000
+#define CLINT_TIME_VAL_OFF 0xbff8
+
+u32 __iomem *clint_ipi_base;
+
+void clint_init_boot_cpu(void)
+{
+ struct device_node *np;
+ void __iomem *base;
+
+ np = of_find_compatible_node(NULL, NULL, "riscv,clint0");
+ if (!np) {
+ panic("clint not found");
+ return;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base)
+ panic("could not map CLINT");
+
+ clint_ipi_base = base + CLINT_IPI_OFF;
+ riscv_time_cmp = base + CLINT_TIME_CMP_OFF;
+ riscv_time_val = base + CLINT_TIME_VAL_OFF;
+
+ clint_clear_ipi(boot_cpu_hartid);
+}
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 845ae0e12115..365ff8420bfe 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -17,6 +17,7 @@
#include <linux/sched/task.h>
#include <linux/swiotlb.h>
+#include <asm/clint.h>
#include <asm/setup.h>
#include <asm/sections.h>
#include <asm/pgtable.h>
@@ -67,6 +68,7 @@ void __init setup_arch(char **cmdline_p)
setup_bootmem();
paging_init();
unflatten_device_tree();
+ clint_init_boot_cpu();
#ifdef CONFIG_SWIOTLB
swiotlb_init(1);
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index c0fbc04e6810..eb878abcaaf8 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -16,6 +16,7 @@
#include <linux/seq_file.h>
#include <linux/delay.h>
+#include <asm/clint.h>
#include <asm/sbi.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
@@ -92,7 +93,10 @@ static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op)
smp_mb__after_atomic();
riscv_cpuid_to_hartid_mask(mask, &hartid_mask);
- sbi_send_ipi(cpumask_bits(&hartid_mask));
+ if (IS_ENABLED(CONFIG_RISCV_SBI))
+ sbi_send_ipi(cpumask_bits(&hartid_mask));
+ else
+ clint_send_ipi_mask(&hartid_mask);
}
static void send_ipi_single(int cpu, enum ipi_message_type op)
@@ -103,12 +107,18 @@ static void send_ipi_single(int cpu, enum ipi_message_type op)
set_bit(op, &ipi_data[cpu].bits);
smp_mb__after_atomic();
- sbi_send_ipi(cpumask_bits(cpumask_of(hartid)));
+ if (IS_ENABLED(CONFIG_RISCV_SBI))
+ sbi_send_ipi(cpumask_bits(cpumask_of(hartid)));
+ else
+ clint_send_ipi_single(hartid);
}
static inline void clear_ipi(void)
{
- csr_clear(CSR_IP, IE_SIE);
+ if (IS_ENABLED(CONFIG_RISCV_SBI))
+ csr_clear(CSR_IP, IE_SIE);
+ else
+ clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id()));
}
void riscv_software_interrupt(void)
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 261f4087cc39..8bc01f0ca73b 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -24,6 +24,7 @@
#include <linux/of.h>
#include <linux/sched/task_stack.h>
#include <linux/sched/mm.h>
+#include <asm/clint.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
@@ -137,6 +138,9 @@ asmlinkage __visible void __init smp_callin(void)
{
struct mm_struct *mm = &init_mm;
+ if (!IS_ENABLED(CONFIG_RISCV_SBI))
+ clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id()));
+
/* All kernel threads share the same mm context. */
mmgrab(mm);
current->active_mm = mm;
--
2.24.0.rc0
Powered by blists - more mailing lists