| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191114013927.GA22656@bogus>
Date: Wed, 13 Nov 2019 19:39:27 -0600
From: Rob Herring <robh@...nel.org>
To: Benjamin Gaignard <benjamin.gaignard@...com>
Cc: mark.rutland@....com, alexandre.torgue@...com,
fabrice.gasnier@...com, jic23@...nel.org, knaack.h@....de,
lars@...afoo.de, pmeerw@...erw.net, lee.jones@...aro.org,
thierry.reding@...il.com, u.kleine-koenig@...gutronix.de,
devicetree@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org, linux-pwm@...r.kernel.org
Subject: Re: [PATCH v2] dt-bindings: mfd: Convert stm32 timers bindings to
json-schema
On Thu, Nov 07, 2019 at 08:14:25PM +0100, Benjamin Gaignard wrote:
> Convert the STM32 timers binding to DT schema format using json-schema
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...com>
> ---
> version 2:
> - merge all (mfd, iio, pwm, counter) bindings in one file
> - fix typo and trailing spaces
> - rework dmas and dma-names properties to allow schemas like:
> ch1 , ch2, ch4
> ch2, up, com
> - use patternProperties to describe timer subnode
> - improve st,breakinput property definition to be able to check the values
> inside de tuple
> .../bindings/counter/stm32-timer-cnt.txt | 31 -----
> .../bindings/iio/timer/stm32-timer-trigger.txt | 25 ----
> .../devicetree/bindings/mfd/st,stm32-timers.yaml | 155 +++++++++++++++++++++
> .../devicetree/bindings/mfd/stm32-timers.txt | 73 ----------
> .../devicetree/bindings/pwm/pwm-stm32.txt | 38 -----
> 5 files changed, 155 insertions(+), 167 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt
> delete mode 100644 Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
> delete mode 100644 Documentation/devicetree/bindings/mfd/stm32-timers.txt
> delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32.txt
>
> diff --git a/Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt b/Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt
> deleted file mode 100644
> index c52fcdd4bf6c..000000000000
> --- a/Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -STMicroelectronics STM32 Timer quadrature encoder
> -
> -STM32 Timer provides quadrature encoder to detect
> -angular position and direction of rotary elements,
> -from IN1 and IN2 input signals.
> -
> -Must be a sub-node of an STM32 Timer device tree node.
> -See ../mfd/stm32-timers.txt for details about the parent node.
> -
> -Required properties:
> -- compatible: Must be "st,stm32-timer-counter".
> -- pinctrl-names: Set to "default".
> -- pinctrl-0: List of phandles pointing to pin configuration nodes,
> - to set CH1/CH2 pins in mode of operation for STM32
> - Timer input on external pin.
> -
> -Example:
> - timers@...10000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "st,stm32-timers";
> - reg = <0x40010000 0x400>;
> - clocks = <&rcc 0 160>;
> - clock-names = "int";
> -
> - counter {
> - compatible = "st,stm32-timer-counter";
> - pinctrl-names = "default";
> - pinctrl-0 = <&tim1_in_pins>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
> deleted file mode 100644
> index b8e8c769d434..000000000000
> --- a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -STMicroelectronics STM32 Timers IIO timer bindings
> -
> -Must be a sub-node of an STM32 Timers device tree node.
> -See ../mfd/stm32-timers.txt for details about the parent node.
> -
> -Required parameters:
> -- compatible: Must be one of:
> - "st,stm32-timer-trigger"
> - "st,stm32h7-timer-trigger"
> -- reg: Identify trigger hardware block.
> -
> -Example:
> - timers@...10000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "st,stm32-timers";
> - reg = <0x40010000 0x400>;
> - clocks = <&rcc 0 160>;
> - clock-names = "int";
> -
> - timer@0 {
> - compatible = "st,stm32-timer-trigger";
> - reg = <0>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
> new file mode 100644
> index 000000000000..e8bd80038fa9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
> @@ -0,0 +1,155 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 Timers bindings
> +
> +description: |
> + This hardware block provides 3 types of timer along with PWM functionality:
> + - advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
> + prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
> + - general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
> + programmable prescaler and PWM outputs.
> + - basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
> +
> +maintainers:
> + - Benjamin Gaignard <benjamin.gaignard@...com>
> + - Fabrice Gasnier <fabrice.gasnier@...com>
> +
> +properties:
> + compatible:
> + const: st,stm32-timers
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: int
> +
> + reset:
> + maxItems: 1
> +
> + dmas:
> + minItems: 1
> + maxItems: 7
> +
> + dma-names:
> + items:
> + - enum: [ ch1, ch2, ch3, ch4, up, trig, com ]
Drop the '-' so the values are applied to all items, not just the first.
Note that ideally we want to define each item rather than do this.
> + minItems: 1
> + maxItems: 7
> + additionalItems: true
And then drop this.
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + pwm:
> + type: object
> +
> + properties:
> + compatible:
> + const: st,stm32-pwm
> +
> + "#pwm-cells":
> + const: 3
> +
> + st,breakinput:
> + description: |
> + One or two <index level filter> to describe break input configurations.
> +
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + - items:
minItems: 1
maxItems: 2
(at same level as outer 'items').
> + items:
> + - description: |
> + "index" indicates on which break input (0 or 1) the configuration should be applied.
> + enum: [ 0 , 1]
> + - description: |
> + "level" gives the active level (0=low or 1=high) of the input signal for this configuration
> + enum: [ 0, 1 ]
> + - description: |
> + "filter" gives the filtering value (up to 15) to be applied.
> + maximum: 15
> +
> + required:
> + - "#pwm-cells"
> + - compatible
> +
> +patternProperties:
> + "^timer@[0-9]+$":
> + type: object
> +
> + properties:
> + compatible:
> + enum:
> + - st,stm32-timer-trigger
> + - st,stm32h7-timer-trigger
> +
> + reg:
> + maxItems: 1
> + description: identify trigger hardware block.
Should be able to define the range of values, right?
> +
> + required:
> + - compatible
> + - reg
> +
> + counter:
> + type: object
> +
> + properties:
> + compatible:
> + const: st,stm32-timer-counter
> +
> + required:
> + - compatible
> +
> +required:
> + - "#address-cells"
> + - "#size-cells"
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/stm32mp1-clks.h>
> + timers2: timers@...00000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40000000 0x400>;
> + clocks = <&rcc TIM2_K>;
> + clock-names = "int";
> + dmas = <&dmamux1 18 0x400 0x1>,
> + <&dmamux1 19 0x400 0x1>,
> + <&dmamux1 20 0x400 0x1>,
> + <&dmamux1 21 0x400 0x1>,
> + <&dmamux1 22 0x400 0x1>;
> + dma-names = "ch1", "ch2", "ch3", "ch4", "up";
> + pwm {
> + compatible = "st,stm32-pwm";
> + #pwm-cells = <3>;
> + st,breakinput = <0 1 5>;
> + };
> + timer@0 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <0>;
> + };
> + counter {
> + compatible = "st,stm32-timer-counter";
> + };
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
> deleted file mode 100644
> index 15c3b87f51d9..000000000000
> --- a/Documentation/devicetree/bindings/mfd/stm32-timers.txt
> +++ /dev/null
> @@ -1,73 +0,0 @@
> -STM32 Timers driver bindings
> -
> -This IP provides 3 types of timer along with PWM functionality:
> -- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
> - prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
> -- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
> - programmable prescaler and PWM outputs.
> -- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
> -
> -Required parameters:
> -- compatible: must be "st,stm32-timers"
> -
> -- reg: Physical base address and length of the controller's
> - registers.
> -- clock-names: Set to "int".
> -- clocks: Phandle to the clock used by the timer module.
> - For Clk properties, please refer to ../clock/clock-bindings.txt
> -
> -Optional parameters:
> -- resets: Phandle to the parent reset controller.
> - See ../reset/st,stm32-rcc.txt
> -- dmas: List of phandle to dma channels that can be used for
> - this timer instance. There may be up to 7 dma channels.
> -- dma-names: List of dma names. Must match 'dmas' property. Valid
> - names are: "ch1", "ch2", "ch3", "ch4", "up", "trig",
> - "com".
> -
> -Optional subnodes:
> -- pwm: See ../pwm/pwm-stm32.txt
> -- timer: See ../iio/timer/stm32-timer-trigger.txt
> -- counter: See ../counter/stm32-timer-cnt.txt
> -
> -Example:
> - timers@...10000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "st,stm32-timers";
> - reg = <0x40010000 0x400>;
> - clocks = <&rcc 0 160>;
> - clock-names = "int";
> -
> - pwm {
> - compatible = "st,stm32-pwm";
> - pinctrl-0 = <&pwm1_pins>;
> - pinctrl-names = "default";
> - };
> -
> - timer@0 {
> - compatible = "st,stm32-timer-trigger";
> - reg = <0>;
> - };
> -
> - counter {
> - compatible = "st,stm32-timer-counter";
> - pinctrl-names = "default";
> - pinctrl-0 = <&tim1_in_pins>;
> - };
> - };
> -
> -Example with all dmas:
> - timer@...10000 {
> - ...
> - dmas = <&dmamux1 11 0x400 0x0>,
> - <&dmamux1 12 0x400 0x0>,
> - <&dmamux1 13 0x400 0x0>,
> - <&dmamux1 14 0x400 0x0>,
> - <&dmamux1 15 0x400 0x0>,
> - <&dmamux1 16 0x400 0x0>,
> - <&dmamux1 17 0x400 0x0>;
> - dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig", "com";
> - ...
> - child nodes...
> - };
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
> deleted file mode 100644
> index a8690bfa5e1f..000000000000
> --- a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -STMicroelectronics STM32 Timers PWM bindings
> -
> -Must be a sub-node of an STM32 Timers device tree node.
> -See ../mfd/stm32-timers.txt for details about the parent node.
> -
> -Required parameters:
> -- compatible: Must be "st,stm32-pwm".
> -- pinctrl-names: Set to "default".
> -- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.
> - For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
> -- #pwm-cells: Should be set to 3. This PWM chip uses the default 3 cells
> - bindings defined in pwm.txt.
> -
> -Optional parameters:
> -- st,breakinput: One or two <index level filter> to describe break input configurations.
> - "index" indicates on which break input (0 or 1) the configuration
> - should be applied.
> - "level" gives the active level (0=low or 1=high) of the input signal
> - for this configuration.
> - "filter" gives the filtering value to be applied.
> -
> -Example:
> - timers@...10000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "st,stm32-timers";
> - reg = <0x40010000 0x400>;
> - clocks = <&rcc 0 160>;
> - clock-names = "int";
> -
> - pwm {
> - compatible = "st,stm32-pwm";
> - #pwm-cells = <3>;
> - pinctrl-0 = <&pwm1_pins>;
> - pinctrl-names = "default";
> - st,breakinput = <0 1 5>;
> - };
> - };
> --
> 2.15.0
>
Powered by blists - more mailing lists