lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1573812304-24074-9-git-send-email-tdas@codeaurora.org>
Date:   Fri, 15 Nov 2019 15:35:04 +0530
From:   Taniya Das <tdas@...eaurora.org>
To:     Stephen Boyd <sboyd@...nel.org>,
        Michael Turquette   <mturquette@...libre.com>
Cc:     David Brown <david.brown@...aro.org>,
        Rajendra Nayak <rnayak@...eaurora.org>,
        linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
        linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, robh@...nel.org, robh+dt@...nel.org,
        Taniya Das <tdas@...eaurora.org>
Subject: [PATCH v2 8/8] clk: qcom: Add video clock controller driver for SC7180

Add support for the video clock controller found on SC7180
based devices. This would allow video drivers to probe
and control their clocks.

Signed-off-by: Taniya Das <tdas@...eaurora.org>
---
 drivers/clk/qcom/Kconfig          |   8 ++
 drivers/clk/qcom/Makefile         |   1 +
 drivers/clk/qcom/videocc-sc7180.c | 259 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 268 insertions(+)
 create mode 100644 drivers/clk/qcom/videocc-sc7180.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index e648a60..cf21d5c 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -253,6 +253,14 @@ config SC_GPUCC_7180
 	  Say Y if you want to support graphics controller devices and
 	  functionality such as 3D graphics.

+config SC_VIDEOCC_7180
+	tristate "SC7180 Video Clock Controller"
+	select SC_GCC_7180
+	help
+	  Support for the video clock controller on SC7180 devices.
+	  Say Y if you want to support video devices and functionality such as
+	  video encode and decode.
+
 config SDM_CAMCC_845
 	tristate "SDM845 Camera Clock Controller"
 	select SDM_GCC_845
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 5477482..4cdd08f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o
 obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
 obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o
 obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
+obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
 obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
 obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
diff --git a/drivers/clk/qcom/videocc-sc7180.c b/drivers/clk/qcom/videocc-sc7180.c
new file mode 100644
index 0000000..0c60986
--- /dev/null
+++ b/drivers/clk/qcom/videocc-sc7180.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,videocc-sc7180.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "gdsc.h"
+
+enum {
+	P_BI_TCXO,
+	P_CHIP_SLEEP_CLK,
+	P_CORE_BI_PLL_TEST_SE,
+	P_VIDEO_PLL0_OUT_EVEN,
+	P_VIDEO_PLL0_OUT_MAIN,
+	P_VIDEO_PLL0_OUT_ODD,
+};
+
+static const struct pll_vco fabia_vco[] = {
+	{ 249600000, 2000000000, 0 },
+};
+
+static struct clk_alpha_pll video_pll0 = {
+	.offset = 0x42c,
+	.vco_table = fabia_vco,
+	.num_vco = ARRAY_SIZE(fabia_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "video_pll0",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fabia_ops,
+		},
+	},
+};
+
+static const struct parent_map video_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_VIDEO_PLL0_OUT_MAIN, 1 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_1[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &video_pll0.clkr.hw },
+	{ .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};
+
+static const struct freq_tbl ftbl_video_cc_venus_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(150000000, P_VIDEO_PLL0_OUT_MAIN, 4, 0, 0),
+	F(270000000, P_VIDEO_PLL0_OUT_MAIN, 2.5, 0, 0),
+	F(340000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(434000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(500000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_venus_clk_src = {
+	.cmd_rcgr = 0x7f0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_1,
+	.freq_tbl = ftbl_video_cc_venus_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "video_cc_venus_clk_src",
+		.parent_data = video_cc_parent_data_1,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_branch video_cc_vcodec0_axi_clk = {
+	.halt_reg = 0x9ec,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x9ec,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_vcodec0_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_vcodec0_core_clk = {
+	.halt_reg = 0x890,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x890,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_vcodec0_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_venus_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_venus_ahb_clk = {
+	.halt_reg = 0xa4c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xa4c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_venus_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_venus_ctl_axi_clk = {
+	.halt_reg = 0x9cc,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x9cc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_venus_ctl_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_venus_ctl_core_clk = {
+	.halt_reg = 0x850,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x850,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_venus_ctl_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_venus_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc venus_gdsc = {
+	.gdscr = 0x814,
+	.pd = {
+		.name = "venus_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc vcodec0_gdsc = {
+	.gdscr = 0x874,
+	.pd = {
+		.name = "vcodec0_gdsc",
+	},
+	.flags = HW_CTRL,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct clk_regmap *video_cc_sc7180_clocks[] = {
+	[VIDEO_CC_VCODEC0_AXI_CLK] = &video_cc_vcodec0_axi_clk.clkr,
+	[VIDEO_CC_VCODEC0_CORE_CLK] = &video_cc_vcodec0_core_clk.clkr,
+	[VIDEO_CC_VENUS_AHB_CLK] = &video_cc_venus_ahb_clk.clkr,
+	[VIDEO_CC_VENUS_CLK_SRC] = &video_cc_venus_clk_src.clkr,
+	[VIDEO_CC_VENUS_CTL_AXI_CLK] = &video_cc_venus_ctl_axi_clk.clkr,
+	[VIDEO_CC_VENUS_CTL_CORE_CLK] = &video_cc_venus_ctl_core_clk.clkr,
+	[VIDEO_PLL0] = &video_pll0.clkr,
+};
+
+static struct gdsc *video_cc_sc7180_gdscs[] = {
+	[VENUS_GDSC] = &venus_gdsc,
+	[VCODEC0_GDSC] = &vcodec0_gdsc,
+};
+
+static const struct regmap_config video_cc_sc7180_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0xb94,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc video_cc_sc7180_desc = {
+	.config = &video_cc_sc7180_regmap_config,
+	.clks = video_cc_sc7180_clocks,
+	.num_clks = ARRAY_SIZE(video_cc_sc7180_clocks),
+	.gdscs = video_cc_sc7180_gdscs,
+	.num_gdscs = ARRAY_SIZE(video_cc_sc7180_gdscs),
+};
+
+static const struct of_device_id video_cc_sc7180_match_table[] = {
+	{ .compatible = "qcom,sc7180-videocc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, video_cc_sc7180_match_table);
+
+static int video_cc_sc7180_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	struct alpha_pll_config video_pll0_config = {};
+
+	regmap = qcom_cc_map(pdev, &video_cc_sc7180_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	video_pll0_config.l = 0x1f;
+	video_pll0_config.alpha = 0x4000;
+	video_pll0_config.user_ctl_val = 0x00000001;
+	video_pll0_config.user_ctl_hi_val = 0x00004805;
+
+	clk_fabia_pll_configure(&video_pll0, regmap, &video_pll0_config);
+
+	/* video_cc_xo_clk */
+	regmap_update_bits(regmap, 0x984, 0x1, 0x1);
+
+	return qcom_cc_really_probe(pdev, &video_cc_sc7180_desc, regmap);
+}
+
+static struct platform_driver video_cc_sc7180_driver = {
+	.probe = video_cc_sc7180_probe,
+	.driver = {
+		.name = "sc7180-videocc",
+		.of_match_table = video_cc_sc7180_match_table,
+	},
+};
+
+static int __init video_cc_sc7180_init(void)
+{
+	return platform_driver_register(&video_cc_sc7180_driver);
+}
+subsys_initcall(video_cc_sc7180_init);
+
+static void __exit video_cc_sc7180_exit(void)
+{
+	platform_driver_unregister(&video_cc_sc7180_driver);
+}
+module_exit(video_cc_sc7180_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QTI VIDEOCC SC7180 Driver");
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ