| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fbc4dee61c2547458fa0791f38abaed2@realtek.com>
Date: Fri, 15 Nov 2019 14:52:16 +0000
From: James Tai <james.tai@...ltek.com>
To: Andreas Färber <afaerber@...e.de>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"'DTML'" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-realtek-soc@...ts.infradead.org"
<linux-realtek-soc@...ts.infradead.org>
Subject: RE: [PATCH v3 2/2] arm64: dts: realtek: Add RTD1619 SoC and Realtek Mjolnir EVB
> > Add Device Trees for Realtek RTD1619 SoC family, RTD1619 SoC and
> > Realtek Mjolnir EVB.
> >
> > Signed-off-by: James Tai <james.tai@...ltek.com>
> > ---
>
> Lacking the requested changelog.
>
> > arch/arm64/boot/dts/realtek/Makefile | 2 +
> > .../boot/dts/realtek/rtd1619-mjolnir.dts | 40 +++++
> > arch/arm64/boot/dts/realtek/rtd1619.dtsi | 12 ++
> > arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 163
> ++++++++++++++++++
> > 4 files changed, 217 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
> > create mode 100644 arch/arm64/boot/dts/realtek/rtd1619.dtsi
> > create mode 100644 arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>
> Somehow the last hunk (rtd16xx.dtsi) didn't apply with git-am or patch -p1, not
> sure why. I have manually copied the file into place and fixed up some more
> nits below:
>
> >
> > diff --git a/arch/arm64/boot/dts/realtek/Makefile
> > b/arch/arm64/boot/dts/realtek/Makefile
> > index 555638ada721..fb5f05978ecc 100644
> > --- a/arch/arm64/boot/dts/realtek/Makefile
> > +++ b/arch/arm64/boot/dts/realtek/Makefile
> > @@ -7,3 +7,5 @@ dtb-$(CONFIG_ARCH_REALTEK) +=
> rtd1295-probox2-ava.dtb
> > dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
> >
> > dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb
> > +
> > +dtb-$(CONFIG_ARCH_REALTEK) += rtd1619-mjolnir.dtb
> > diff --git a/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
> > b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
> > new file mode 100644
> > index 000000000000..6ab791af3896
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
> > @@ -0,0 +1,40 @@
> > +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> > +/*
> > + * Copyright (c) 2019 Realtek Semiconductor Corp.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "rtd1619.dtsi"
> > +
> > +/ {
> > + compatible = "realtek,rtd1619", "realtek,mjolnir";
>
> Order not fixed from v2. This is a schema violation and logically wrong.
>
> > + model= "Realtek Mjolnir EVB";
>
> Space missing before =. Missed that in v2.
>
> > +
> > + memory@0 {
> > + device_type = "memory";
> > + reg = <0x0 0x80000000>;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + aliases {
> > + serial0 = &uart0; /* The UART0 is debug console */
> > + serial1 = &uart1; /* The UART1 is on M.2 slot */
> > + serial2 = &uart2; /* The UART2 is on GPIO connector */
> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + status = "disabled";
> > +};
> > +
> > +&uart2 {
> > + status = "disabled";
> > +};
>
> The comments were intended to go above each node, not after the aliases.
> I've taken the liberty to annotate them further with their PCB label.
>
> > diff --git a/arch/arm64/boot/dts/realtek/rtd1619.dtsi
> > b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
> > new file mode 100644
> > index 000000000000..e52bf708b04e
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
> > @@ -0,0 +1,12 @@
> > +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> > +/*
> > + * Realtek RTD1619 SoC
> > + *
> > + * Copyright (c) 2019 Realtek Semiconductor Corp.
> > + */
> > +
> > +#include "rtd16xx.dtsi"
> > +
> > +/ {
> > + compatible = "realtek,rtd1619";
> > +};
> > diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> > b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> > new file mode 100644
> > index 000000000000..d9b572a870f5
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> > @@ -0,0 +1,163 @@
> > +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> > +/*
> > + * Realtek RTD16xx SoC family
> > + *
> > + * Copyright (c) 2019 Realtek Semiconductor Corp.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +/{
>
> Space missing. Missed that in v2.
>
> > + interrupt-parent = <&gic>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu0: cpu@0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x0>;
> > + enable-method = "psci";
> > + next-level-cache = <&l2>;
> > + };
> > +
> > + cpu1: cpu@100 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x100>;
> > + enable-method = "psci";
> > + next-level-cache = <&l3>;
> > + };
> > +
> > + cpu2: cpu@200 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x200>;
> > + enable-method = "psci";
> > + next-level-cache = <&l3>;
> > + };
> > +
> > + cpu3: cpu@300 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x300>;
> > + enable-method = "psci";
> > + next-level-cache = <&l3>;
> > + };
> > +
> > + cpu4: cpu@400 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x400>;
> > + enable-method = "psci";
> > + next-level-cache = <&l3>;
> > + };
> > +
> > + cpu5: cpu@500 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x500>;
> > + enable-method = "psci";
> > + next-level-cache = <&l3>;
> > + };
> > +
> > + l2: l2-cache {
> > + compatible = "cache";
> > + next-level-cache = <&l3>;
> > +
> > + };
> > +
> > + l3: l3-cache {
> > + compatible = "cache";
> > + };
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + arm_pmu: pmu {
> > + compatible = "arm,armv8-pmuv3";
> > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + psci {
> > + compatible = "arm,psci-1.0";
> > + method = "smc";
> > + };
> > +
> > + osc27M: osc {
> > + compatible = "fixed-clock";
> > + clock-frequency = <27000000>;
> > + clock-output-names = "osc27M";
> > + #clock-cells = <0>;
> > + };
> > +
> > + soc@...00000 {
>
> If the node has a unit address, it also needs a reg property with that value. So
> let's drop the unit address.
>
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x98000000 0x98000000 0x68000000>;
> > +
> > + rbus: r-bus@...00000 {
> > + compatible = "simple-bus";
> > + reg = <0x98000000 0x200000>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0x98000000 0x200000>;
> > +
> > + uart0: serial0@...0 {
> > + compatible = "snps,dw-apb-uart";
> > + reg = <0x7800 0x400>;
> > + reg-shift = <2>;
> > + reg-io-width = <4>;
> > + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> > + clock-frequency = <27000000>;
> > + status = "disabled";
> > + };
> > +
> > + uart1: serial1@...00 {
> > + compatible = "snps,dw-apb-uart";
> > + reg = <0x1b200 0x400>;
> > + reg-shift = <2>;
> > + reg-io-width = <4>;
> > + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> > + clock-frequency = <432000000>;
> > + status = "disabled";
> > + };
> > +
> > + uart2: serial2@...00 {
> > + compatible = "snps,dw-apb-uart";
> > + reg = <0x1b400 0x400>;
> > + reg-shift = <2>;
> > + reg-io-width = <4>;
> > + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> > + clock-frequency = <432000000>;
> > + status = "disabled";
> > + };
> > + };
> > +
> > + gic: interrupt-controller@...00000 {
> > + compatible = "arm,gic-v3";
> > + reg = <0xff100000 0x10000>,
> > + <0xff140000 0xc0000>;
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > + };
> > +};
> > +
> > +&arm_pmu {
> > + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>,
> > + <&cpu3>, <&cpu4>, <&cpu5>;
> > +};
>
> Now that they're in the same file, this can just go into the node.
>
I'll correct these mistakes in next version.
Powered by blists - more mailing lists