[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1573926653.3.0@crapouillou.net>
Date: Sat, 16 Nov 2019 18:50:53 +0100
From: Paul Cercueil <paul@...pouillou.net>
To: Guenter Roeck <linux@...ck-us.net>,
Wim Van Sebroeck <wim@...ux-watchdog.org>
Cc: linux-watchdog@...r.kernel.org, linux-kernel@...r.kernel.org,
od@...c.me, Mathieu Malaterre <malat@...ian.org>,
Artur Rojek <contact@...ur-rojek.eu>
Subject: Re: [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU
driver
Hi Guenter,
I noticed you already acked all the patches in the V1 but expected them
to go through the MIPS tree; could you take them into your tree instead?
Cheers,
-Paul
Le mer., oct. 23, 2019 at 19:47, Paul Cercueil <paul@...pouillou.net> a
écrit :
> Instead of requesting the "ext" clock and handling the watchdog clock
> divider and gating in the watchdog driver, we now request and use the
> "wdt" clock that is supplied by the ingenic-timer "TCU" driver.
>
> The major benefit is that the watchdog's clock rate and parent can now
> be specified from within devicetree, instead of hardcoded in the
> driver.
>
> Also, this driver won't poke anymore into the TCU registers to
> enable/disable the clock, as this is now handled by the TCU driver.
>
> On the bad side, we break the ABI with devicetree - as we now request
> a
> different clock. In this very specific case it is still okay, as every
> Ingenic JZ47xx-based board out there compile the devicetree within the
> kernel; so it's still time to push breaking changes, in order to get a
> clean devicetree that won't break once it musn't.
>
> Signed-off-by: Paul Cercueil <paul@...pouillou.net>
> Tested-by: Mathieu Malaterre <malat@...ian.org>
> Tested-by: Artur Rojek <contact@...ur-rojek.eu>
> Acked-by: Guenter Roeck <linux@...ck-us.net>
> ---
>
> Notes:
> v2: Rebase on top of 5.4-rc4
>
> drivers/watchdog/Kconfig | 1 +
> drivers/watchdog/jz4740_wdt.c | 75
> ++++++++++++++---------------------
> 2 files changed, 31 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 58e7c100b6ad..6421187769cf 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1642,6 +1642,7 @@ config INDYDOG
> config JZ4740_WDT
> tristate "Ingenic jz4740 SoC hardware watchdog"
> depends on MACH_JZ4740 || MACH_JZ4780
> + depends on COMMON_CLK
> select WATCHDOG_CORE
> help
> Hardware driver for the built-in watchdog timer on Ingenic jz4740
> SoCs.
> diff --git a/drivers/watchdog/jz4740_wdt.c
> b/drivers/watchdog/jz4740_wdt.c
> index c6052ae54f32..72920f09f4a7 100644
> --- a/drivers/watchdog/jz4740_wdt.c
> +++ b/drivers/watchdog/jz4740_wdt.c
> @@ -18,19 +18,6 @@
> #include <linux/err.h>
> #include <linux/of.h>
>
> -#include <asm/mach-jz4740/timer.h>
> -
> -#define JZ_WDT_CLOCK_PCLK 0x1
> -#define JZ_WDT_CLOCK_RTC 0x2
> -#define JZ_WDT_CLOCK_EXT 0x4
> -
> -#define JZ_WDT_CLOCK_DIV_1 (0 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_4 (1 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_16 (2 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_64 (3 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_256 (4 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_1024 (5 << TCU_TCSR_PRESCALE_LSB)
> -
> #define DEFAULT_HEARTBEAT 5
> #define MAX_HEARTBEAT 2048
>
> @@ -50,7 +37,8 @@ MODULE_PARM_DESC(heartbeat,
> struct jz4740_wdt_drvdata {
> struct watchdog_device wdt;
> void __iomem *base;
> - struct clk *rtc_clk;
> + struct clk *clk;
> + unsigned long clk_rate;
> };
>
> static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
> @@ -65,32 +53,14 @@ static int jz4740_wdt_set_timeout(struct
> watchdog_device *wdt_dev,
> unsigned int new_timeout)
> {
> struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> - unsigned int rtc_clk_rate;
> - unsigned int timeout_value;
> - unsigned short clock_div = JZ_WDT_CLOCK_DIV_1;
> + u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
> u8 tcer;
>
> - rtc_clk_rate = clk_get_rate(drvdata->rtc_clk);
> -
> - timeout_value = rtc_clk_rate * new_timeout;
> - while (timeout_value > 0xffff) {
> - if (clock_div == JZ_WDT_CLOCK_DIV_1024) {
> - /* Requested timeout too high;
> - * use highest possible value. */
> - timeout_value = 0xffff;
> - break;
> - }
> - timeout_value >>= 2;
> - clock_div += (1 << TCU_TCSR_PRESCALE_LSB);
> - }
> -
> tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
> writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
> - writew(clock_div, drvdata->base + TCU_REG_WDT_TCSR);
>
> writew((u16)timeout_value, drvdata->base + TCU_REG_WDT_TDR);
> writew(0x0, drvdata->base + TCU_REG_WDT_TCNT);
> - writew(clock_div | JZ_WDT_CLOCK_RTC, drvdata->base +
> TCU_REG_WDT_TCSR);
>
> if (tcer & TCU_WDT_TCER_TCEN)
> writeb(TCU_WDT_TCER_TCEN, drvdata->base + TCU_REG_WDT_TCER);
> @@ -102,11 +72,15 @@ static int jz4740_wdt_set_timeout(struct
> watchdog_device *wdt_dev,
> static int jz4740_wdt_start(struct watchdog_device *wdt_dev)
> {
> struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> + int ret;
> u8 tcer;
>
> + ret = clk_prepare_enable(drvdata->clk);
> + if (ret)
> + return ret;
> +
> tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
>
> - jz4740_timer_enable_watchdog();
> jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
>
> /* Start watchdog if it wasn't started already */
> @@ -121,7 +95,7 @@ static int jz4740_wdt_stop(struct watchdog_device
> *wdt_dev)
> struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
>
> writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
> - jz4740_timer_disable_watchdog();
> + clk_disable_unprepare(drvdata->clk);
>
> return 0;
> }
> @@ -162,21 +136,38 @@ static int jz4740_wdt_probe(struct
> platform_device *pdev)
> struct device *dev = &pdev->dev;
> struct jz4740_wdt_drvdata *drvdata;
> struct watchdog_device *jz4740_wdt;
> + long rate;
> + int ret;
>
> drvdata = devm_kzalloc(dev, sizeof(struct jz4740_wdt_drvdata),
> GFP_KERNEL);
> if (!drvdata)
> return -ENOMEM;
>
> - if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
> - heartbeat = DEFAULT_HEARTBEAT;
> + drvdata->clk = devm_clk_get(&pdev->dev, "wdt");
> + if (IS_ERR(drvdata->clk)) {
> + dev_err(&pdev->dev, "cannot find WDT clock\n");
> + return PTR_ERR(drvdata->clk);
> + }
> +
> + /* Set smallest clock possible */
> + rate = clk_round_rate(drvdata->clk, 1);
> + if (rate < 0)
> + return rate;
> +
> + ret = clk_set_rate(drvdata->clk, rate);
> + if (ret)
> + return ret;
>
> + drvdata->clk_rate = rate;
> jz4740_wdt = &drvdata->wdt;
> jz4740_wdt->info = &jz4740_wdt_info;
> jz4740_wdt->ops = &jz4740_wdt_ops;
> - jz4740_wdt->timeout = heartbeat;
> jz4740_wdt->min_timeout = 1;
> - jz4740_wdt->max_timeout = MAX_HEARTBEAT;
> + jz4740_wdt->max_timeout = 0xffff / rate;
> + jz4740_wdt->timeout = clamp(heartbeat,
> + jz4740_wdt->min_timeout,
> + jz4740_wdt->max_timeout);
> jz4740_wdt->parent = dev;
> watchdog_set_nowayout(jz4740_wdt, nowayout);
> watchdog_set_drvdata(jz4740_wdt, drvdata);
> @@ -185,12 +176,6 @@ static int jz4740_wdt_probe(struct
> platform_device *pdev)
> if (IS_ERR(drvdata->base))
> return PTR_ERR(drvdata->base);
>
> - drvdata->rtc_clk = devm_clk_get(dev, "rtc");
> - if (IS_ERR(drvdata->rtc_clk)) {
> - dev_err(dev, "cannot find RTC clock\n");
> - return PTR_ERR(drvdata->rtc_clk);
> - }
> -
> return devm_watchdog_register_device(dev, &drvdata->wdt);
> }
>
> --
> 2.23.0
>
Powered by blists - more mailing lists