| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6c389fa0-a0a0-a79e-f63e-10e3616962be@linux.intel.com>
Date: Mon, 18 Nov 2019 09:40:59 -0600
From: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
To: Ravulapati Vishnu vardhan rao
<Vishnuvardhanrao.Ravulapati@....com>
Cc: "moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM..."
<alsa-devel@...a-project.org>,
open list <linux-kernel@...r.kernel.org>,
Takashi Iwai <tiwai@...e.com>,
Liam Girdwood <lgirdwood@...il.com>, Akshu.Agrawal@....com,
Mark Brown <broonie@...nel.org>, djkurtz@...gle.com,
Alexander.Deucher@....com, Dan Carpenter <dan.carpenter@...cle.com>
Subject: Re: [alsa-devel] [PATCH v7 1/6] ASoC: amd:Create multiple I2S
platform device endpoint
> static int snd_acp3x_probe(struct pci_dev *pci,
> const struct pci_device_id *pci_id)
> {
> - int ret;
> - u32 addr, val;
> struct acp3x_dev_data *adata;
> - struct platform_device_info pdevinfo;
> + struct platform_device_info pdevinfo[ACP3x_DEVS];
> unsigned int irqflags;
> + int ret, val, i;
> + u32 addr;
>
> if (pci_enable_device(pci)) {
if you are using devm_ across the board then you could also use
pcim_enable_device() here?
> dev_err(&pci->dev, "pci_enable_device failed\n");
> @@ -40,10 +40,10 @@ static int snd_acp3x_probe(struct pci_dev *pci,
> }
>
> adata = devm_kzalloc(&pci->dev, sizeof(struct acp3x_dev_data),
> - GFP_KERNEL);
> + GFP_KERNEL);
> if (!adata) {
> ret = -ENOMEM;
> - goto release_regions;
> + goto adata_free;
> }
>
> /* check for msi interrupt support */
> @@ -56,7 +56,8 @@ static int snd_acp3x_probe(struct pci_dev *pci,
> irqflags = 0;
>
> addr = pci_resource_start(pci, 0);
> - adata->acp3x_base = ioremap(addr, pci_resource_len(pci, 0));
> + adata->acp3x_base = devm_ioremap(&pci->dev, addr,
> + pci_resource_len(pci, 0));
> if (!adata->acp3x_base) {
> ret = -ENOMEM;
> goto release_regions;
> @@ -68,11 +69,11 @@ static int snd_acp3x_probe(struct pci_dev *pci,
> switch (val) {
> case I2S_MODE:
> adata->res = devm_kzalloc(&pci->dev,
> - sizeof(struct resource) * 2,
> + sizeof(struct resource) * 4,
> GFP_KERNEL);
> if (!adata->res) {
> ret = -ENOMEM;
> - goto unmap_mmio;
> + goto release_regions;
> }
>
> adata->res[0].name = "acp3x_i2s_iomem";
> @@ -80,28 +81,52 @@ static int snd_acp3x_probe(struct pci_dev *pci,
> adata->res[0].start = addr;
> adata->res[0].end = addr + (ACP3x_REG_END - ACP3x_REG_START);
>
> - adata->res[1].name = "acp3x_i2s_irq";
> - adata->res[1].flags = IORESOURCE_IRQ;
> - adata->res[1].start = pci->irq;
> - adata->res[1].end = pci->irq;
> + adata->res[1].name = "acp3x_i2s_sp";
> + adata->res[1].flags = IORESOURCE_MEM;
> + adata->res[1].start = addr + ACP3x_I2STDM_REG_START;
> + adata->res[1].end = addr + ACP3x_I2STDM_REG_END;
> +
> + adata->res[2].name = "acp3x_i2s_bt";
> + adata->res[2].flags = IORESOURCE_MEM;
> + adata->res[2].start = addr + ACP3x_BT_TDM_REG_START;
> + adata->res[2].end = addr + ACP3x_BT_TDM_REG_END;
> +
> + adata->res[3].name = "acp3x_i2s_irq";
> + adata->res[3].flags = IORESOURCE_IRQ;
> + adata->res[3].start = pci->irq;
> + adata->res[3].end = adata->res[3].start;
>
> adata->acp3x_audio_mode = ACP3x_I2S_MODE;
>
> memset(&pdevinfo, 0, sizeof(pdevinfo));
> - pdevinfo.name = "acp3x_rv_i2s";
> - pdevinfo.id = 0;
> - pdevinfo.parent = &pci->dev;
> - pdevinfo.num_res = 2;
> - pdevinfo.res = adata->res;
> - pdevinfo.data = &irqflags;
> - pdevinfo.size_data = sizeof(irqflags);
> -
> - adata->pdev = platform_device_register_full(&pdevinfo);
> - if (IS_ERR(adata->pdev)) {
> - dev_err(&pci->dev, "cannot register %s device\n",
> - pdevinfo.name);
> - ret = PTR_ERR(adata->pdev);
> - goto unmap_mmio;
> + pdevinfo[0].name = "acp3x_rv_i2s_dma";
> + pdevinfo[0].id = 0;
> + pdevinfo[0].parent = &pci->dev;
> + pdevinfo[0].num_res = 4;
> + pdevinfo[0].res = &adata->res[0];
> + pdevinfo[0].data = &irqflags;
> + pdevinfo[0].size_data = sizeof(irqflags);
> +
> + pdevinfo[1].name = "acp3x_i2s_playcap";
> + pdevinfo[1].id = 0;
> + pdevinfo[1].parent = &pci->dev;
> + pdevinfo[1].num_res = 1;
> + pdevinfo[1].res = &adata->res[1];
> +
> + pdevinfo[2].name = "acp3x_i2s_playcap";
> + pdevinfo[2].id = 1;
> + pdevinfo[2].parent = &pci->dev;
> + pdevinfo[2].num_res = 1;
> + pdevinfo[2].res = &adata->res[2];
> + for (i = 0; i < ACP3x_DEVS ; i++) {
> + adata->pdev[i] =
> + platform_device_register_full(&pdevinfo[i]);
> + if (IS_ERR(adata->pdev[i])) {
> + dev_err(&pci->dev, "cannot register %s device\n",
> + pdevinfo[i].name);
> + ret = PTR_ERR(adata->pdev[i]);
> + goto unmap_mmio;
> + }
> }
> break;
> default:
> @@ -112,10 +137,22 @@ static int snd_acp3x_probe(struct pci_dev *pci,
> return 0;
>
> unmap_mmio:
> + if (val == I2S_MODE)
> + for (i = 0 ; i < ACP3x_DEVS ; i++)
> + platform_device_unregister(adata->pdev[i]);
> + devm_kfree(&pci->dev, adata->res);
> + devm_kfree(&pci->dev, adata);
> pci_disable_msi(pci);
> - iounmap(adata->acp3x_base);
> + pci_release_regions(pci);
> + pci_disable_device(pci);
> release_regions:
> + devm_kfree(&pci->dev, adata);
> + pci_disable_msi(pci);
> pci_release_regions(pci);
> + pci_disable_device(pci);
> +adata_free:
> + pci_release_regions(pci);
> + pci_disable_device(pci);
> disable_pci:
> pci_disable_device(pci);
this error flow is probably wrong, you should not repeat the same
sequences when going from one label to the other.
it should be something like (not verified, example only)
devm_kfree(&pci->dev, adata->res);
release_regions:
devm_kfree(&pci->dev, adata);
pci_disable_msi(pci);
adata_free:
pci_release_regions(pci);
disable_pci:
pci_disable_device(pci);
Stopping the review here.
Powered by blists - more mailing lists