linux-kernel - [PATCH v3] usb: xhci: only set D3hot for pci device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191119081656.8746-1-henryl@nvidia.com>
Date:   Tue, 19 Nov 2019 16:16:56 +0800
From:   Henry Lin <henryl@...dia.com>
To:     unlisted-recipients:; (no To-header on input)
CC:     Henry Lin <henryl@...dia.com>,
        Mathias Nyman <mathias.nyman@...el.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v3] usb: xhci: only set D3hot for pci device

Xhci driver cannot call pci_set_power_state() on non-pci xhci host
controllers. For example, NVIDIA Tegra XHCI host controller which acts
as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform
hits this issue during shutdown.

Signed-off-by: Henry Lin <henryl@...dia.com>
---
 drivers/usb/host/xhci-pci.c | 13 +++++++++++++
 drivers/usb/host/xhci.c     |  6 +-----
 drivers/usb/host/xhci.h     |  1 +
 3 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1e0236e90687..1904ef56f61c 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -519,6 +519,18 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 }
 #endif /* CONFIG_PM */
 
+static void xhci_pci_shutdown(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+
+	xhci_shutdown(hcd);
+
+	/* Yet another workaround for spurious wakeups at shutdown with HSW */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+		pci_set_power_state(pdev, PCI_D3hot);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* PCI driver selection metadata; PCI hotplugging uses this */
@@ -554,6 +566,7 @@ static int __init xhci_pci_init(void)
 #ifdef CONFIG_PM
 	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
 	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+	xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
 #endif
 	return pci_register_driver(&xhci_pci_driver);
 }
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6c17e3fe181a..e59346488f64 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -770,7 +770,7 @@ static void xhci_stop(struct usb_hcd *hcd)
  *
  * This will only ever be called with the main usb_hcd (the USB3 roothub).
  */
-static void xhci_shutdown(struct usb_hcd *hcd)
+void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
@@ -789,10 +789,6 @@ static void xhci_shutdown(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"xhci_shutdown completed - status = %x",
 			readl(&xhci->op_regs->status));
-
-	/* Yet another workaround for spurious wakeups at shutdown with HSW */
-	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
-		pci_set_power_state(to_pci_dev(hcd->self.sysdev), PCI_D3hot);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index f9f88626a57a..973d665052a2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2050,6 +2050,7 @@ int xhci_start(struct xhci_hcd *xhci);
 int xhci_reset(struct xhci_hcd *xhci);
 int xhci_run(struct usb_hcd *hcd);
 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
+void xhci_shutdown(struct usb_hcd *hcd);
 void xhci_init_driver(struct hc_driver *drv,
 		      const struct xhci_driver_overrides *over);
 int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
-- 
2.17.1