[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191119191505.25286-1-geert+renesas@glider.be>
Date: Tue, 19 Nov 2019 20:15:05 +0100
From: Geert Uytterhoeven <geert+renesas@...der.be>
To: Rob Herring <robh@...nel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Andrew Murray <andrew.murray@....com>,
Srinath Mannam <srinath.mannam@...adcom.com>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Marek Vasut <marek.vasut+renesas@...il.com>,
linux-pci@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH] PCI: of: Restore alignment/indentation in host bridge window table
Since the printing of the inbound resources was added, alignment and
indentation of the host bridge window table is broken because of two
reasons:
1. The "IB MEM" row header is longer than the other headers,
2. Inbound ranges typically extend beyond 32-bit address space, and thus
don't fit in "#010llx".
Fix this by extending the row header field to 6 characters, and the
format string to 40-bit addresses.
Use "%6s" to handle field size and right-alignment, instead of manual
preparation using error-prone snprintf() calls. Use the exact same
format string for both cases, to allow sharing.
Impact on kernel boot log on r8a7791/koelsch:
rcar-pcie fe000000.pcie: host bridge /soc/pcie@...00000 ranges:
-rcar-pcie fe000000.pcie: IO 0xfe100000..0xfe1fffff -> 0x00000000
-rcar-pcie fe000000.pcie: MEM 0xfe200000..0xfe3fffff -> 0xfe200000
-rcar-pcie fe000000.pcie: MEM 0x30000000..0x37ffffff -> 0x30000000
-rcar-pcie fe000000.pcie: MEM 0x38000000..0x3fffffff -> 0x38000000
-rcar-pcie fe000000.pcie: IB MEM 0x40000000..0xbfffffff -> 0x40000000
-rcar-pcie fe000000.pcie: IB MEM 0x200000000..0x2ffffffff -> 0x200000000
+rcar-pcie fe000000.pcie: IO 0x00fe100000..0x00fe1fffff -> 0x0000000000
+rcar-pcie fe000000.pcie: MEM 0x00fe200000..0x00fe3fffff -> 0x00fe200000
+rcar-pcie fe000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000
+rcar-pcie fe000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000
+rcar-pcie fe000000.pcie: IB MEM 0x0040000000..0x00bfffffff -> 0x0040000000
+rcar-pcie fe000000.pcie: IB MEM 0x0200000000..0x02ffffffff -> 0x0200000000
Fixes: 52ac576f88f9f701 ("PCI: of: Add inbound resource parsing to helpers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
drivers/pci/of.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index e7e12adcff3a3836..81ceeaa6f1d5a2c5 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -265,7 +265,7 @@ static int devm_of_pci_get_host_bridge_resources(struct device *dev,
struct resource *bus_range;
struct of_pci_range range;
struct of_pci_range_parser parser;
- char range_type[4];
+ const char *range_type;
int err;
if (io_base)
@@ -299,12 +299,12 @@ static int devm_of_pci_get_host_bridge_resources(struct device *dev,
for_each_of_pci_range(&parser, &range) {
/* Read next ranges element */
if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
- snprintf(range_type, 4, " IO");
+ range_type = "IO";
else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
- snprintf(range_type, 4, "MEM");
+ range_type = "MEM";
else
- snprintf(range_type, 4, "err");
- dev_info(dev, " %s %#010llx..%#010llx -> %#010llx\n",
+ range_type = "err";
+ dev_info(dev, " %6s %#012llx..%#012llx -> %#012llx\n",
range_type, range.cpu_addr,
range.cpu_addr + range.size - 1, range.pci_addr);
@@ -359,8 +359,8 @@ static int devm_of_pci_get_host_bridge_resources(struct device *dev,
range.cpu_addr == OF_BAD_ADDR || range.size == 0)
continue;
- dev_info(dev, "IB MEM %#010llx..%#010llx -> %#010llx\n",
- range.cpu_addr,
+ dev_info(dev, " %6s %#012llx..%#012llx -> %#012llx\n",
+ "IB MEM", range.cpu_addr,
range.cpu_addr + range.size - 1, range.pci_addr);
--
2.17.1
Powered by blists - more mailing lists